| Message ID | 1466681415-8058-2-git-send-email-dennis.chen@arm.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, Jun 23, 2016 at 07:30:15PM +0800, Dennis Chen wrote: > This is a rework patch based on [1]. According to the proposal from > Mark Rutland, when applying the system memory limit through 'mem=x' > kernel command line, don't remove the rest memory regions above the > limit from the memblock, instead marking them as MEMBLOCK_NOMAP region, > which will preserve the ability to identify regions as normal memory > while not using them for allocation and the linear map. > > Without this patch, the ACPI core will map those acpi data regions(if > they are above the limit) as device type memory, which will result in > the alignment exception when ACPI core parses the AML data stream > since the parsing will produce some non-alignment accesses. > > [1]:http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438443.html Please rewrite the message to be standalone (i.e. so peopel can read this without having to folow the link). Explain why using mem= makes ACPI think regions should be mapped as Device memory, the problems this causes for ACPICA, then cover why we want to nomap the region. > Signed-off-by: Dennis Chen <dennis.chen@arm.com> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Steve Capper <steve.capper@arm.com> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> > Cc: Will Deacon <will.deacon@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Cc: Matt Fleming <matt@codeblueprint.co.uk> > Cc: linux-mm@kvack.org > Cc: linux-acpi@vger.kernel.org > Cc: linux-efi@vger.kernel.org > --- > arch/arm64/mm/init.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c > index d45f862..e509e24 100644 > --- a/arch/arm64/mm/init.c > +++ b/arch/arm64/mm/init.c > @@ -222,12 +222,14 @@ void __init arm64_memblock_init(void) > > /* > * Apply the memory limit if it was set. Since the kernel may be loaded > - * high up in memory, add back the kernel region that must be accessible > - * via the linear mapping. > + * in the memory regions above the limit, so we need to clear the > + * MEMBLOCK_NOMAP flag of this region to make it can be accessible via > + * the linear mapping. > */ > if (memory_limit != (phys_addr_t)ULLONG_MAX) { > - memblock_enforce_memory_limit(memory_limit); > - memblock_add(__pa(_text), (u64)(_end - _text)); > + memblock_mem_limit_mark_nomap(memory_limit); > + if (!memblock_is_map_memory(__pa(_text))) > + memblock_clear_nomap(__pa(_text), (u64)(_end - _text)); I think that the memblock_is_map_memory() check should go. Just because a page of the kernel image is mapped doesn't mean that the rest is. That will make this a 1-1 change. Other than that, this looks right to me. Thanks, Mark. > } > > if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_start) { > -- > 1.8.3.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 23, 2016 at 01:42:30PM +0100, Mark Rutland wrote: > On Thu, Jun 23, 2016 at 07:30:15PM +0800, Dennis Chen wrote: > > This is a rework patch based on [1]. According to the proposal from > > Mark Rutland, when applying the system memory limit through 'mem=x' > > kernel command line, don't remove the rest memory regions above the > > limit from the memblock, instead marking them as MEMBLOCK_NOMAP region, > > which will preserve the ability to identify regions as normal memory > > while not using them for allocation and the linear map. > > > > Without this patch, the ACPI core will map those acpi data regions(if > > they are above the limit) as device type memory, which will result in > > the alignment exception when ACPI core parses the AML data stream > > since the parsing will produce some non-alignment accesses. > > > > [1]:http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438443.html > > Please rewrite the message to be standalone (i.e. so peopel can read > this without having to folow the link). > > Explain why using mem= makes ACPI think regions should be mapped as > Device memory, the problems this causes for ACPICA, then cover why we > want to nomap the region. > > > Signed-off-by: Dennis Chen <dennis.chen@arm.com> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Cc: Steve Capper <steve.capper@arm.com> > > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> > > Cc: Will Deacon <will.deacon@arm.com> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > Cc: Matt Fleming <matt@codeblueprint.co.uk> > > Cc: linux-mm@kvack.org > > Cc: linux-acpi@vger.kernel.org > > Cc: linux-efi@vger.kernel.org > > --- > > arch/arm64/mm/init.c | 10 ++++++---- > > 1 file changed, 6 insertions(+), 4 deletions(-) > > > > diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c > > index d45f862..e509e24 100644 > > --- a/arch/arm64/mm/init.c > > +++ b/arch/arm64/mm/init.c > > @@ -222,12 +222,14 @@ void __init arm64_memblock_init(void) > > > > /* > > * Apply the memory limit if it was set. Since the kernel may be loaded > > - * high up in memory, add back the kernel region that must be accessible > > - * via the linear mapping. > > + * in the memory regions above the limit, so we need to clear the > > + * MEMBLOCK_NOMAP flag of this region to make it can be accessible via > > + * the linear mapping. > > */ > > if (memory_limit != (phys_addr_t)ULLONG_MAX) { > > - memblock_enforce_memory_limit(memory_limit); > > - memblock_add(__pa(_text), (u64)(_end - _text)); > > + memblock_mem_limit_mark_nomap(memory_limit); > > + if (!memblock_is_map_memory(__pa(_text))) > > + memblock_clear_nomap(__pa(_text), (u64)(_end - _text)); > > I think that the memblock_is_map_memory() check should go. Just because > a page of the kernel image is mapped doesn't mean that the rest is. That > will make this a 1-1 change. > Good catch! Will be applied, thanks! > > Other than that, this looks right to me. > > Thanks, > Mark. > > > } > > > > if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_start) { > > -- > > 1.8.3.1 > > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index d45f862..e509e24 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -222,12 +222,14 @@ void __init arm64_memblock_init(void) /* * Apply the memory limit if it was set. Since the kernel may be loaded - * high up in memory, add back the kernel region that must be accessible - * via the linear mapping. + * in the memory regions above the limit, so we need to clear the + * MEMBLOCK_NOMAP flag of this region to make it can be accessible via + * the linear mapping. */ if (memory_limit != (phys_addr_t)ULLONG_MAX) { - memblock_enforce_memory_limit(memory_limit); - memblock_add(__pa(_text), (u64)(_end - _text)); + memblock_mem_limit_mark_nomap(memory_limit); + if (!memblock_is_map_memory(__pa(_text))) + memblock_clear_nomap(__pa(_text), (u64)(_end - _text)); } if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_start) {
This is a rework patch based on [1]. According to the proposal from Mark Rutland, when applying the system memory limit through 'mem=x' kernel command line, don't remove the rest memory regions above the limit from the memblock, instead marking them as MEMBLOCK_NOMAP region, which will preserve the ability to identify regions as normal memory while not using them for allocation and the linear map. Without this patch, the ACPI core will map those acpi data regions(if they are above the limit) as device type memory, which will result in the alignment exception when ACPI core parses the AML data stream since the parsing will produce some non-alignment accesses. [1]:http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438443.html Signed-off-by: Dennis Chen <dennis.chen@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: linux-efi@vger.kernel.org --- arch/arm64/mm/init.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)