| Message ID | 1475107811-8880-2-git-send-email-vishal.l.verma@intel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed, Sep 28, 2016 at 5:10 PM, Vishal Verma <vishal.l.verma@intel.com> wrote: > Starting a full Address Range Scrub (ARS) on hitting a memory error > machine check exception may not always be desirable. Provide a way > through sysfs to toggle the behavior between just adding the address > (cache line) where the MCE happened to the poison list and doing a full > scrub. The former (selective insertion of the address) is done > unconditionally. > > Cc: linux-acpi@vger.kernel.org > Cc: Dan Williams <dan.j.williams@intel.com> > Cc: Linda Knippers <linda.knippers@hpe.com> > Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> > --- > drivers/acpi/nfit/core.c | 23 ++++++++++++++++++++--- > drivers/acpi/nfit/mce.c | 24 +++++++++++++++++++----- > drivers/acpi/nfit/nfit.h | 6 ++++++ > 3 files changed, 45 insertions(+), 8 deletions(-) > > diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c > index 80cc7c0..ec1069e 100644 > --- a/drivers/acpi/nfit/core.c > +++ b/drivers/acpi/nfit/core.c > @@ -901,6 +901,14 @@ static ssize_t scrub_show(struct device *dev, I think scrub_show() should display the current auto-scrub mode, right? > return rc; > } > > +/* > + * The 'scrub' attribute can only have following values written to it: > + * '1': Start an on-demand scrub, and enable a full scrub to happen if a > + * machine check exception for a memory error is received. > + * '2': Switch to the default mode where a machine check will only insert > + * the address on which the memory error was received into the poison > + * and badblocks lists. > + */ > static ssize_t scrub_store(struct device *dev, > struct device_attribute *attr, const char *buf, size_t size) > { > @@ -911,15 +919,24 @@ static ssize_t scrub_store(struct device *dev, > rc = kstrtol(buf, 0, &val); > if (rc) > return rc; > - if (val != 1) > - return -EINVAL; > > device_lock(dev); > nd_desc = dev_get_drvdata(dev); > if (nd_desc) { > struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc); > > - rc = acpi_nfit_ars_rescan(acpi_desc); > + switch (val) { > + case MCE_SCRUB_ON: > + rc = acpi_nfit_ars_rescan(acpi_desc); > + acpi_desc->scrub_mode = MCE_SCRUB_ON; > + break; > + case MCE_SCRUB_OFF: > + acpi_desc->scrub_mode = MCE_SCRUB_OFF; > + break; Shouldn't this still kick off a scrub? It's awkward that the only way to run a scrub is to put the driver into automatic re-scrub mode. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Sep 28, 2016 at 5:53 PM, Dan Williams <dan.j.williams@intel.com> wrote: > On Wed, Sep 28, 2016 at 5:10 PM, Vishal Verma <vishal.l.verma@intel.com> wrote: >> Starting a full Address Range Scrub (ARS) on hitting a memory error >> machine check exception may not always be desirable. Provide a way >> through sysfs to toggle the behavior between just adding the address >> (cache line) where the MCE happened to the poison list and doing a full >> scrub. The former (selective insertion of the address) is done >> unconditionally. > > >> >> Cc: linux-acpi@vger.kernel.org >> Cc: Dan Williams <dan.j.williams@intel.com> >> Cc: Linda Knippers <linda.knippers@hpe.com> >> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> >> --- >> drivers/acpi/nfit/core.c | 23 ++++++++++++++++++++--- >> drivers/acpi/nfit/mce.c | 24 +++++++++++++++++++----- >> drivers/acpi/nfit/nfit.h | 6 ++++++ >> 3 files changed, 45 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c >> index 80cc7c0..ec1069e 100644 >> --- a/drivers/acpi/nfit/core.c >> +++ b/drivers/acpi/nfit/core.c >> @@ -901,6 +901,14 @@ static ssize_t scrub_show(struct device *dev, > > I think scrub_show() should display the current auto-scrub mode, right? > >> return rc; >> } >> >> +/* >> + * The 'scrub' attribute can only have following values written to it: >> + * '1': Start an on-demand scrub, and enable a full scrub to happen if a >> + * machine check exception for a memory error is received. >> + * '2': Switch to the default mode where a machine check will only insert >> + * the address on which the memory error was received into the poison >> + * and badblocks lists. >> + */ >> static ssize_t scrub_store(struct device *dev, >> struct device_attribute *attr, const char *buf, size_t size) >> { >> @@ -911,15 +919,24 @@ static ssize_t scrub_store(struct device *dev, >> rc = kstrtol(buf, 0, &val); >> if (rc) >> return rc; >> - if (val != 1) >> - return -EINVAL; >> >> device_lock(dev); >> nd_desc = dev_get_drvdata(dev); >> if (nd_desc) { >> struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc); >> >> - rc = acpi_nfit_ars_rescan(acpi_desc); >> + switch (val) { >> + case MCE_SCRUB_ON: >> + rc = acpi_nfit_ars_rescan(acpi_desc); >> + acpi_desc->scrub_mode = MCE_SCRUB_ON; >> + break; >> + case MCE_SCRUB_OFF: >> + acpi_desc->scrub_mode = MCE_SCRUB_OFF; >> + break; > > Shouldn't this still kick off a scrub? It's awkward that the only way > to run a scrub is to put the driver into automatic re-scrub mode. Hmm, although it will probably still be awkward if we make it do a scrub in this case. Might be better to have a separate "auto_scrub" property that sets what to do on latent error detection. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 80cc7c0..ec1069e 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -901,6 +901,14 @@ static ssize_t scrub_show(struct device *dev, return rc; } +/* + * The 'scrub' attribute can only have following values written to it: + * '1': Start an on-demand scrub, and enable a full scrub to happen if a + * machine check exception for a memory error is received. + * '2': Switch to the default mode where a machine check will only insert + * the address on which the memory error was received into the poison + * and badblocks lists. + */ static ssize_t scrub_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { @@ -911,15 +919,24 @@ static ssize_t scrub_store(struct device *dev, rc = kstrtol(buf, 0, &val); if (rc) return rc; - if (val != 1) - return -EINVAL; device_lock(dev); nd_desc = dev_get_drvdata(dev); if (nd_desc) { struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc); - rc = acpi_nfit_ars_rescan(acpi_desc); + switch (val) { + case MCE_SCRUB_ON: + rc = acpi_nfit_ars_rescan(acpi_desc); + acpi_desc->scrub_mode = MCE_SCRUB_ON; + break; + case MCE_SCRUB_OFF: + acpi_desc->scrub_mode = MCE_SCRUB_OFF; + break; + default: + rc = -EINVAL; + break; + } } device_unlock(dev); if (rc) diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c index 161f915..05005e2 100644 --- a/drivers/acpi/nfit/mce.c +++ b/drivers/acpi/nfit/mce.c @@ -14,6 +14,7 @@ */ #include <linux/notifier.h> #include <linux/acpi.h> +#include <linux/nd.h> #include <asm/mce.h> #include "nfit.h" @@ -62,12 +63,25 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val, } mutex_unlock(&acpi_desc->init_mutex); - /* - * We can ignore an -EBUSY here because if an ARS is already - * in progress, just let that be the last authoritative one - */ - if (found_match) + if (!found_match) + continue; + + /* If this fails due to an -ENOMEM, there is little we can do */ + nvdimm_bus_add_poison(acpi_desc->nvdimm_bus, + ALIGN(mce->addr, L1_CACHE_BYTES), + L1_CACHE_BYTES); + nvdimm_region_notify(nfit_spa->nd_region, + NVDIMM_REVALIDATE_POISON); + + if (acpi_desc->scrub_mode == MCE_SCRUB_ON) { + /* + * We can ignore an -EBUSY here because if an ARS is + * already in progress, just let that be the last + * authoritative one + */ acpi_nfit_ars_rescan(acpi_desc); + } + break; } mutex_unlock(&acpi_desc_lock); diff --git a/drivers/acpi/nfit/nfit.h b/drivers/acpi/nfit/nfit.h index e894ded..487dc0a 100644 --- a/drivers/acpi/nfit/nfit.h +++ b/drivers/acpi/nfit/nfit.h @@ -152,6 +152,7 @@ struct acpi_nfit_desc { struct list_head list; struct kernfs_node *scrub_count_state; unsigned int scrub_count; + unsigned int scrub_mode; unsigned int cancel:1; unsigned long dimm_cmd_force_en; unsigned long bus_cmd_force_en; @@ -159,6 +160,11 @@ struct acpi_nfit_desc { void *iobuf, u64 len, int rw); }; +enum scrub_mode { + MCE_SCRUB_ON = 1, + MCE_SCRUB_OFF = 2, +}; + enum nd_blk_mmio_selector { BDW, DCR,
Starting a full Address Range Scrub (ARS) on hitting a memory error machine check exception may not always be desirable. Provide a way through sysfs to toggle the behavior between just adding the address (cache line) where the MCE happened to the poison list and doing a full scrub. The former (selective insertion of the address) is done unconditionally. Cc: linux-acpi@vger.kernel.org Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> --- drivers/acpi/nfit/core.c | 23 ++++++++++++++++++++--- drivers/acpi/nfit/mce.c | 24 +++++++++++++++++++----- drivers/acpi/nfit/nfit.h | 6 ++++++ 3 files changed, 45 insertions(+), 8 deletions(-)