| Message ID | 1481753438-3905-3-git-send-email-agustinv@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 2016/12/15 6:10, Agustin Vega-Frias wrote: > ACPI extended IRQ resources may contain a ResourceSource to specify > an alternate interrupt controller. Introduce acpi_irq_get and use it > to implement ResourceSource/IRQ domain mapping. > > The new API is similar to of_irq_get and allows re-initialization > of a platform resource from the ACPI extended IRQ resource, and > provides proper behavior for probe deferral when the domain is not > yet present when called. > > Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> > --- > drivers/acpi/Makefile | 2 +- > drivers/acpi/{gsi.c => irq.c} | 182 ++++++++++++++++++++++++++++++++++++++++++ > drivers/base/platform.c | 9 ++- > include/linux/acpi.h | 10 +++ > 4 files changed, 201 insertions(+), 2 deletions(-) > rename drivers/acpi/{gsi.c => irq.c} (32%) > [...] > +/** > + * acpi_irq_parse_one_cb - Handle the given resource > + * @ares: resource to handle > + * @context: context for the walk, contains the lookup index and references > + * to the flags and fwspec where the result is returned > + * > + * This is called by acpi_walk_resources passing each resource returned by > + * the _CRS method. We only inspect IRQ resources. Since IRQ resources > + * might contain multiple interrupts we check if the index is within this > + * one's interrupt array, otherwise we subtract the current resource IRQ > + * count from the lookup index to prepare for the next resource. > + * Once a match is found we call acpi_irq_parse_one_match to populate > + * the result and end the walk by returning AE_CTRL_TERMINATE. > + * > + * Return AE_OK if the walk should continue, AE_CTRL_TERMINATE if a matching > + * IRQ resource was found. > + */ > +static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares, > + void *context) > +{ > + struct acpi_irq_parse_one_ctx *ctx = context; > + struct acpi_resource_irq *irq; > + struct acpi_resource_extended_irq *eirq; > + struct fwnode_handle *fwnode; > + > + switch (ares->type) { > + case ACPI_RESOURCE_TYPE_IRQ: > + irq = &ares->data.irq; > + if (ctx->index >= irq->interrupt_count) { > + ctx->index -= irq->interrupt_count; > + return AE_OK; > + } > + fwnode = acpi_gsi_domain_id; > + acpi_irq_parse_one_match(fwnode, irq->interrupts[ctx->index], > + irq->triggering, irq->polarity, > + irq->sharable, ctx); > + return AE_CTRL_TERMINATE; > + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: > + eirq = &ares->data.extended_irq; If it's an interrupt producer, I think we don't need to map the interrupts in any irqdomain, and return AE_CTRL_TERMINATE here. case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: eirq = &ares->data.extended_irq; + if (eirq->producer_consumer == ACPI_PRODUCER) + return AE_CTRL_TERMINATE; if (ctx->index >= eirq->interrupt_count) { Thanks Hanjun -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Hanjun, On 2017-01-17 07:47, Hanjun Guo wrote: > On 2016/12/15 6:10, Agustin Vega-Frias wrote: >> ACPI extended IRQ resources may contain a ResourceSource to specify >> an alternate interrupt controller. Introduce acpi_irq_get and use it >> to implement ResourceSource/IRQ domain mapping. >> >> The new API is similar to of_irq_get and allows re-initialization >> of a platform resource from the ACPI extended IRQ resource, and >> provides proper behavior for probe deferral when the domain is not >> yet present when called. >> >> Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> >> --- >> drivers/acpi/Makefile | 2 +- >> drivers/acpi/{gsi.c => irq.c} | 182 >> ++++++++++++++++++++++++++++++++++++++++++ >> drivers/base/platform.c | 9 ++- >> include/linux/acpi.h | 10 +++ >> 4 files changed, 201 insertions(+), 2 deletions(-) >> rename drivers/acpi/{gsi.c => irq.c} (32%) >> > [...] >> +/** >> + * acpi_irq_parse_one_cb - Handle the given resource >> + * @ares: resource to handle >> + * @context: context for the walk, contains the lookup index and >> references >> + * to the flags and fwspec where the result is returned >> + * >> + * This is called by acpi_walk_resources passing each resource >> returned by >> + * the _CRS method. We only inspect IRQ resources. Since IRQ >> resources >> + * might contain multiple interrupts we check if the index is within >> this >> + * one's interrupt array, otherwise we subtract the current resource >> IRQ >> + * count from the lookup index to prepare for the next resource. >> + * Once a match is found we call acpi_irq_parse_one_match to populate >> + * the result and end the walk by returning AE_CTRL_TERMINATE. >> + * >> + * Return AE_OK if the walk should continue, AE_CTRL_TERMINATE if a >> matching >> + * IRQ resource was found. >> + */ >> +static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares, >> + void *context) >> +{ >> + struct acpi_irq_parse_one_ctx *ctx = context; >> + struct acpi_resource_irq *irq; >> + struct acpi_resource_extended_irq *eirq; >> + struct fwnode_handle *fwnode; >> + >> + switch (ares->type) { >> + case ACPI_RESOURCE_TYPE_IRQ: >> + irq = &ares->data.irq; >> + if (ctx->index >= irq->interrupt_count) { >> + ctx->index -= irq->interrupt_count; >> + return AE_OK; >> + } >> + fwnode = acpi_gsi_domain_id; >> + acpi_irq_parse_one_match(fwnode, irq->interrupts[ctx->index], >> + irq->triggering, irq->polarity, >> + irq->sharable, ctx); >> + return AE_CTRL_TERMINATE; >> + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: >> + eirq = &ares->data.extended_irq; > > If it's an interrupt producer, I think we don't need to map the > interrupts in > any irqdomain, and return AE_CTRL_TERMINATE here. > > case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: > eirq = &ares->data.extended_irq; > + if (eirq->producer_consumer == ACPI_PRODUCER) > + return AE_CTRL_TERMINATE; > if (ctx->index >= eirq->interrupt_count) { Agreed. I'll add the check. However, we need to return AE_OK, not AE_CTRL_TERMINATE, since that terminates the walk and there might be other resources to check after this one. Thanks, Agustin
On 2017/1/17 23:07, Agustin Vega-Frias wrote: > Hi Hanjun, > > On 2017-01-17 07:47, Hanjun Guo wrote: >> On 2016/12/15 6:10, Agustin Vega-Frias wrote: >>> ACPI extended IRQ resources may contain a ResourceSource to specify >>> an alternate interrupt controller. Introduce acpi_irq_get and use it >>> to implement ResourceSource/IRQ domain mapping. >>> >>> The new API is similar to of_irq_get and allows re-initialization >>> of a platform resource from the ACPI extended IRQ resource, and >>> provides proper behavior for probe deferral when the domain is not >>> yet present when called. >>> >>> Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> >>> --- >>> drivers/acpi/Makefile | 2 +- >>> drivers/acpi/{gsi.c => irq.c} | 182 ++++++++++++++++++++++++++++++++++++++++++ >>> drivers/base/platform.c | 9 ++- >>> include/linux/acpi.h | 10 +++ >>> 4 files changed, 201 insertions(+), 2 deletions(-) >>> rename drivers/acpi/{gsi.c => irq.c} (32%) >>> >> [...] >>> +/** >>> + * acpi_irq_parse_one_cb - Handle the given resource >>> + * @ares: resource to handle >>> + * @context: context for the walk, contains the lookup index and references >>> + * to the flags and fwspec where the result is returned >>> + * >>> + * This is called by acpi_walk_resources passing each resource returned by >>> + * the _CRS method. We only inspect IRQ resources. Since IRQ resources >>> + * might contain multiple interrupts we check if the index is within this >>> + * one's interrupt array, otherwise we subtract the current resource IRQ >>> + * count from the lookup index to prepare for the next resource. >>> + * Once a match is found we call acpi_irq_parse_one_match to populate >>> + * the result and end the walk by returning AE_CTRL_TERMINATE. >>> + * >>> + * Return AE_OK if the walk should continue, AE_CTRL_TERMINATE if a matching >>> + * IRQ resource was found. >>> + */ >>> +static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares, >>> + void *context) >>> +{ >>> + struct acpi_irq_parse_one_ctx *ctx = context; >>> + struct acpi_resource_irq *irq; >>> + struct acpi_resource_extended_irq *eirq; >>> + struct fwnode_handle *fwnode; >>> + >>> + switch (ares->type) { >>> + case ACPI_RESOURCE_TYPE_IRQ: >>> + irq = &ares->data.irq; >>> + if (ctx->index >= irq->interrupt_count) { >>> + ctx->index -= irq->interrupt_count; >>> + return AE_OK; >>> + } >>> + fwnode = acpi_gsi_domain_id; >>> + acpi_irq_parse_one_match(fwnode, irq->interrupts[ctx->index], >>> + irq->triggering, irq->polarity, >>> + irq->sharable, ctx); >>> + return AE_CTRL_TERMINATE; >>> + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: >>> + eirq = &ares->data.extended_irq; >> >> If it's an interrupt producer, I think we don't need to map the interrupts in >> any irqdomain, and return AE_CTRL_TERMINATE here. >> >> case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: >> eirq = &ares->data.extended_irq; >> + if (eirq->producer_consumer == ACPI_PRODUCER) >> + return AE_CTRL_TERMINATE; >> if (ctx->index >= eirq->interrupt_count) { > > Agreed. I'll add the check. However, we need to return AE_OK, not > AE_CTRL_TERMINATE, since that terminates the walk and there might > be other resources to check after this one. Yes, thanks for the correction, there might be other Interrupt() resources under _CRS which needs to be scanned. Thanks Hanjun -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 9ed0878..a391bbc 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -55,7 +55,7 @@ acpi-$(CONFIG_DEBUG_FS) += debugfs.o acpi-$(CONFIG_ACPI_NUMA) += numa.o acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o acpi-y += acpi_lpat.o -acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o +acpi-$(CONFIG_ACPI_GENERIC_GSI) += irq.o acpi-$(CONFIG_ACPI_WATCHDOG) += acpi_watchdog.o # These are (potentially) separate modules diff --git a/drivers/acpi/gsi.c b/drivers/acpi/irq.c similarity index 32% rename from drivers/acpi/gsi.c rename to drivers/acpi/irq.c index ee9e0f2..133d3f8 100644 --- a/drivers/acpi/gsi.c +++ b/drivers/acpi/irq.c @@ -85,6 +85,188 @@ void acpi_unregister_gsi(u32 gsi) EXPORT_SYMBOL_GPL(acpi_unregister_gsi); /** + * acpi_get_irq_source_fwhandle() - Retrieve the fwhandle of the given + * acpi_resource_source which is used + * as an IRQ domain id + * @source: acpi_resource_source to use for the lookup + * + * Returns: The appropriate IRQ fwhandle domain id + * NULL on failure + */ +static struct fwnode_handle * +acpi_get_irq_source_fwhandle(const struct acpi_resource_source *source) +{ + struct fwnode_handle *result; + struct acpi_device *device; + acpi_handle handle; + acpi_status status; + + if (!source->string_length) + return acpi_gsi_domain_id; + + status = acpi_get_handle(NULL, source->string_ptr, &handle); + if (ACPI_FAILURE(status)) { + pr_warn("Could not find handle for %s\n", source->string_ptr); + return NULL; + } + + device = acpi_bus_get_acpi_device(handle); + if (!device) { + pr_warn("Could not get device for %s\n", source->string_ptr); + return NULL; + } + + result = &device->fwnode; + acpi_bus_put_acpi_device(device); + + return result; +} + +/** + * Context for the resource walk used to lookup IRQ resources. + */ +struct acpi_irq_parse_one_ctx { + int rc; + unsigned int index; + unsigned long *res_flags; + struct irq_fwspec *fwspec; +}; + +/** + * acpi_irq_parse_one_match - Handle a matching IRQ resource + */ +static inline void acpi_irq_parse_one_match(struct fwnode_handle *fwnode, + u32 hwirq, u8 triggering, + u8 polarity, u8 shareable, + struct acpi_irq_parse_one_ctx *ctx) +{ + ctx->rc = 0; + *ctx->res_flags = acpi_dev_irq_flags(triggering, polarity, shareable); + ctx->fwspec->fwnode = fwnode; + ctx->fwspec->param[0] = hwirq; + ctx->fwspec->param[1] = acpi_dev_get_irq_type(triggering, polarity); + ctx->fwspec->param_count = 2; +} + +/** + * acpi_irq_parse_one_cb - Handle the given resource + * @ares: resource to handle + * @context: context for the walk, contains the lookup index and references + * to the flags and fwspec where the result is returned + * + * This is called by acpi_walk_resources passing each resource returned by + * the _CRS method. We only inspect IRQ resources. Since IRQ resources + * might contain multiple interrupts we check if the index is within this + * one's interrupt array, otherwise we subtract the current resource IRQ + * count from the lookup index to prepare for the next resource. + * Once a match is found we call acpi_irq_parse_one_match to populate + * the result and end the walk by returning AE_CTRL_TERMINATE. + * + * Return AE_OK if the walk should continue, AE_CTRL_TERMINATE if a matching + * IRQ resource was found. + */ +static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares, + void *context) +{ + struct acpi_irq_parse_one_ctx *ctx = context; + struct acpi_resource_irq *irq; + struct acpi_resource_extended_irq *eirq; + struct fwnode_handle *fwnode; + + switch (ares->type) { + case ACPI_RESOURCE_TYPE_IRQ: + irq = &ares->data.irq; + if (ctx->index >= irq->interrupt_count) { + ctx->index -= irq->interrupt_count; + return AE_OK; + } + fwnode = acpi_gsi_domain_id; + acpi_irq_parse_one_match(fwnode, irq->interrupts[ctx->index], + irq->triggering, irq->polarity, + irq->sharable, ctx); + return AE_CTRL_TERMINATE; + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: + eirq = &ares->data.extended_irq; + if (ctx->index >= eirq->interrupt_count) { + ctx->index -= eirq->interrupt_count; + return AE_OK; + } + fwnode = acpi_get_irq_source_fwhandle(&eirq->resource_source); + acpi_irq_parse_one_match(fwnode, eirq->interrupts[ctx->index], + eirq->triggering, eirq->polarity, + eirq->sharable, ctx); + return AE_CTRL_TERMINATE; + } + + return AE_OK; +} + +/** + * acpi_irq_parse_one - Resolve an interrupt for a device + * @handle: the device whose interrupt is to be resolved + * @index: index of the interrupt to resolve + * @fwspec: structure irq_fwspec filled by this function + * @flags: resource flags filled by this function + * + * This function resolves an interrupt for a device by walking its CRS resources + * to find the appropriate ACPI IRQ resource and populating the given structure + * which can be used to retrieve a Linux IRQ number. + * + * Returns the result stored in ctx.rc by the callback, or -EINVAL if the given + * index is out of range. + */ +static int acpi_irq_parse_one(acpi_handle handle, unsigned int index, + struct irq_fwspec *fwspec, unsigned long *flags) +{ + struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec }; + acpi_status status; + + status = acpi_walk_resources(handle, METHOD_NAME__CRS, + acpi_irq_parse_one_cb, &ctx); + if (ACPI_FAILURE(status)) + return -EINVAL; + return ctx.rc; +} + +/** + * acpi_irq_get - Look for the ACPI IRQ resource with the given index and + * use it to initialize the given Linux IRQ resource. + * @handle ACPI device handle + * @index ACPI IRQ resource index to lookup + * @res Linux IRQ resource to initialize + * + * Return: 0 on success + * -EINVAL if an error occurs + * -EPROBE_DEFER if the IRQ lookup/conversion failed + */ +int acpi_irq_get(acpi_handle handle, unsigned int index, struct resource *res) +{ + int rc; + struct irq_fwspec fwspec; + struct irq_domain *domain; + unsigned long flags; + + rc = acpi_irq_parse_one(handle, index, &fwspec, &flags); + if (rc) + return rc; + + domain = irq_find_matching_fwnode(fwspec.fwnode, DOMAIN_BUS_ANY); + if (!domain) + return -EPROBE_DEFER; + + rc = irq_create_fwspec_mapping(&fwspec); + if (rc <= 0) + return -EINVAL; + + res->start = rc; + res->end = rc; + res->flags = flags; + + return 0; +} +EXPORT_SYMBOL_GPL(acpi_irq_get); + +/** * acpi_set_irq_model - Setup the GSI irqdomain information * @model: the value assigned to acpi_irq_model * @fwnode: the irq_domain identifier for mapping and looking up diff --git a/drivers/base/platform.c b/drivers/base/platform.c index c4af003..61423d2 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -102,6 +102,14 @@ int platform_get_irq(struct platform_device *dev, unsigned int num) } r = platform_get_resource(dev, IORESOURCE_IRQ, num); + if (r && r->flags & IORESOURCE_DISABLED && ACPI_COMPANION(&dev->dev)) { + int ret; + + ret = acpi_irq_get(ACPI_HANDLE(&dev->dev), num, r); + if (ret) + return ret; + } + /* * The resources may pass trigger flags to the irqs that need * to be set up. It so happens that the trigger flags for @@ -1450,4 +1458,3 @@ void __init early_platform_cleanup(void) memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head)); } } - diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 61a3d90..2284fc6 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -1123,4 +1123,14 @@ static inline void acpi_table_upgrade(void) { } static inline int parse_spcr(bool earlycon) { return 0; } #endif +#ifdef CONFIG_ACPI_GENERIC_GSI +int acpi_irq_get(acpi_handle handle, unsigned int index, struct resource *res); +#else +static inline int acpi_irq_get(acpi_handle handle, unsigned int index, + struct resource *res) +{ + return -EINVAL; +} +#endif + #endif /*_LINUX_ACPI_H*/
ACPI extended IRQ resources may contain a ResourceSource to specify an alternate interrupt controller. Introduce acpi_irq_get and use it to implement ResourceSource/IRQ domain mapping. The new API is similar to of_irq_get and allows re-initialization of a platform resource from the ACPI extended IRQ resource, and provides proper behavior for probe deferral when the domain is not yet present when called. Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> --- drivers/acpi/Makefile | 2 +- drivers/acpi/{gsi.c => irq.c} | 182 ++++++++++++++++++++++++++++++++++++++++++ drivers/base/platform.c | 9 ++- include/linux/acpi.h | 10 +++ 4 files changed, 201 insertions(+), 2 deletions(-) rename drivers/acpi/{gsi.c => irq.c} (32%)