@@ -184,7 +184,7 @@ static int get_all_bus_mappings(void)
d->bus[1] = GET_BITFIELD(reg, 8, 15);
d->bus[2] = GET_BITFIELD(reg, 16, 23);
d->bus[3] = GET_BITFIELD(reg, 24, 31);
- edac_dbg(2, "busses: %x, %x, %x, %x\n",
+ edac_dbg(2, "busses: 0x%x, 0x%x, 0x%x, 0x%x\n",
d->bus[0], d->bus[1], d->bus[2], d->bus[3]);
list_add_tail(&d->list, &skx_edac_list);
skx_num_sockets++;
@@ -220,8 +220,8 @@ static int get_all_munits(const struct munit *m)
/* Be sure that the device is enabled */
if (unlikely(pci_enable_device(pdev) < 0)) {
- skx_printk(KERN_ERR,
- "Couldn't enable %04x:%04x\n", PCI_VENDOR_ID_INTEL, m->did);
+ skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n",
+ PCI_VENDOR_ID_INTEL, m->did);
goto fail;
}
@@ -298,7 +298,7 @@ static int get_dimm_attr(u32 reg, int lobit, int hibit, int add, int minval,
u32 val = GET_BITFIELD(reg, lobit, hibit);
if (val < minval || val > maxval) {
- edac_dbg(2, "bad %s = %d (raw=%x)\n", name, val, reg);
+ edac_dbg(2, "bad %s = %d (raw=0x%x)\n", name, val, reg);
return -EINVAL;
}
return val + add;
@@ -343,7 +343,7 @@ static int skx_get_hi_lo(void)
skx_tohm |= (u64)reg << 32;
pci_dev_put(pdev);
- edac_dbg(2, "tolm=%llx tohm=%llx\n", skx_tolm, skx_tohm);
+ edac_dbg(2, "tolm=0x%llx tohm=0x%llx\n", skx_tolm, skx_tohm);
return 0;
}
@@ -403,18 +403,18 @@ static int get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
}
if (smbios_handle < 0) {
- skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=%x\n", dev_handle);
+ skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=0x%x\n", dev_handle);
goto unknown_size;
}
if (flags & ACPI_NFIT_MEM_MAP_FAILED) {
- skx_printk(KERN_ERR, "NVDIMM ADR=%x is not mapped\n", dev_handle);
+ skx_printk(KERN_ERR, "NVDIMM ADR=0x%x is not mapped\n", dev_handle);
goto unknown_size;
}
size = dmi_memdev_size(smbios_handle);
if (size == ~0ull)
- skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=%x/SMBIOS=%x\n",
+ skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=0x%x/SMBIOS=0x%x\n",
dev_handle, smbios_handle);
unknown_size:
@@ -589,7 +589,7 @@ static bool skx_sad_decode(struct decoded_addr *res)
/* Simple sanity check for I/O space or out of range */
if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
- edac_dbg(0, "Address %llx out of range\n", addr);
+ edac_dbg(0, "Address 0x%llx out of range\n", addr);
return false;
}
@@ -604,7 +604,7 @@ static bool skx_sad_decode(struct decoded_addr *res)
}
prev_limit = limit + 1;
}
- edac_dbg(0, "No SAD entry for %llx\n", addr);
+ edac_dbg(0, "No SAD entry for 0x%llx\n", addr);
return false;
sad_found:
@@ -682,7 +682,7 @@ static bool skx_sad_decode(struct decoded_addr *res)
res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
- edac_dbg(2, "%llx: socket=%d imc=%d channel=%d\n",
+ edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n",
res->addr, res->socket, res->imc, res->channel);
return true;
}
@@ -729,7 +729,7 @@ static bool skx_tad_decode(struct decoded_addr *res)
if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
goto tad_found;
}
- edac_dbg(0, "No TAD entry for %llx\n", res->addr);
+ edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr);
return false;
tad_found:
@@ -757,7 +757,7 @@ static bool skx_tad_decode(struct decoded_addr *res)
res->chan_addr = channel_addr;
- edac_dbg(2, "%llx: chan_addr=%llx sktways=%d chanways=%d\n",
+ edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n",
res->addr, res->chan_addr, res->sktways, res->chanways);
return true;
}
@@ -799,7 +799,7 @@ static bool skx_rir_decode(struct decoded_addr *res)
}
prev_limit = limit;
}
- edac_dbg(0, "No RIR entry for %llx\n", res->addr);
+ edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr);
return false;
rir_found:
@@ -818,7 +818,7 @@ static bool skx_rir_decode(struct decoded_addr *res)
res->dimm = chan_rank / 4;
res->rank = chan_rank % 4;
- edac_dbg(2, "%llx: dimm=%d rank=%d chan_rank=%d rank_addr=%llx\n",
+ edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n",
res->addr, res->dimm, res->rank,
res->channel_rank, res->rank_address);
return true;
@@ -881,7 +881,7 @@ static bool skx_mad_decode(struct decoded_addr *r)
}
r->row &= (1u << dimm->rowbits) - 1;
- edac_dbg(2, "%llx: row=%x col=%x bank_addr=%d bank_group=%d\n",
+ edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n",
r->addr, r->row, r->column, r->bank_address,
r->bank_group);
return true;
@@ -1009,7 +1009,7 @@ static void skx_mce_output_error(struct mem_ctl_info *mci,
}
snprintf(msg, sizeof(msg),
- "%s%s err_code:%04x:%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:%x col:%x",
+ "%s%s err_code:0x%04x:0x%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:0x%x col:0x%x",
overflow ? " OVERFLOW" : "",
(uncorrected_error && recoverable) ? " recoverable" : "",
mscod, errcode,
@@ -1055,12 +1055,12 @@ static int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx "
"Bank %d: %016Lx\n", mce->extcpu, type,
mce->mcgstatus, mce->bank, mce->status);
- skx_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc);
- skx_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr);
- skx_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc);
+ skx_mc_printk(mci, KERN_DEBUG, "TSC 0x%llx ", mce->tsc);
+ skx_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", mce->addr);
+ skx_mc_printk(mci, KERN_DEBUG, "MISC 0x%llx ", mce->misc);
- skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET "
- "%u APIC %x\n", mce->cpuvendor, mce->cpuid,
+ skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:0x%x TIME %llu SOCKET "
+ "%u APIC 0x%x\n", mce->cpuvendor, mce->cpuid,
mce->time, mce->socketid, mce->apicid);
skx_mce_output_error(mci, mce, &res);
@@ -1136,7 +1136,7 @@ static int __init skx_init(void)
if (rc < 0)
goto fail;
if (rc != m->per_socket * skx_num_sockets) {
- edac_dbg(2, "Expected %d, got %d of %x\n",
+ edac_dbg(2, "Expected %d, got %d of 0x%x\n",
m->per_socket * skx_num_sockets, rc, m->did);
rc = -ENODEV;
goto fail;
Some debug/error strings in hex formatting in the skx_edac driver miss '0x' prefix. Prepend hex formatting with '0x' for them, but with one exception: "Couldn't enable %04x:%04x", instead of putting '0x' in this line, add the word 'device'. We commonly use 8086:1234 without the leading '0x' (e.g. as '-d' argument to lspci(8) and setpci(8) commands). Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> --- drivers/edac/skx_edac.c | 46 ++++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 23 deletions(-)