diff mbox series

[1/1] efi: cper: print AER info of PCIe fatal error

Message ID 1562898017-27166-1-git-send-email-tanxiaofei@huawei.com (mailing list archive)
State Not Applicable, archived
Headers show
Series [1/1] efi: cper: print AER info of PCIe fatal error | expand

Commit Message

Xiaofei Tan July 12, 2019, 2:20 a.m. UTC 
AER info of PCIe fatal error is not printed in the current driver.
Because APEI driver will panic directly for fatal error, and can't
run to the place of printing AER info.

An example log is as following:
[ 3157.655028] {763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
[ 3157.663610] {763}[Hardware Error]: event severity: fatal
[ 3157.663612] {763}[Hardware Error]:  Error 0, type: fatal
[ 3157.663614] {763}[Hardware Error]:   section_type: PCIe error
[ 3157.680328] {763}[Hardware Error]:   port_type: 0, PCIe end point
[ 3157.680329] {763}[Hardware Error]:   version: 4.0
[ 3157.680332] {763}[Hardware Error]:   command: 0x0000, status: 0x0010
[ 3157.698757] {763}[Hardware Error]:   device_id: 0000:82:00.0
[ 3157.698758] {763}[Hardware Error]:   slot: 0
[ 3157.698759] {763}[Hardware Error]:   secondary_bus: 0x00
[ 3157.698760] {763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
[ 3157.698761] {763}[Hardware Error]:   class_code: 000002
[ 3157.698825] Kernel panic - not syncing: Fatal hardware error!

This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
cper_print_aer() call out of interrupt context")'. To fix this issue,
this patch adds print of AER info in cper_print_pcie() for fatal error.

Here is the example log after this patch applied:
[ 7032.893566] {24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
[ 7032.901965] {24}[Hardware Error]: event severity: fatal
[ 7032.907166] {24}[Hardware Error]:  Error 0, type: fatal
[ 7032.912366] {24}[Hardware Error]:   section_type: PCIe error
[ 7032.917998] {24}[Hardware Error]:   port_type: 0, PCIe end point
[ 7032.923974] {24}[Hardware Error]:   version: 4.0
[ 7032.928569] {24}[Hardware Error]:   command: 0x0546, status: 0x4010
[ 7032.934806] {24}[Hardware Error]:   device_id: 0000:01:00.0
[ 7032.940352] {24}[Hardware Error]:   slot: 0
[ 7032.944514] {24}[Hardware Error]:   secondary_bus: 0x00
[ 7032.949714] {24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
[ 7032.956381] {24}[Hardware Error]:   class_code: 000002
[ 7032.961495] {24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
[ 7032.969891] {24}[Hardware Error]:   aer_uncor_severity: 0x00062010
[ 7032.976042] {24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
[ 7032.983663] Kernel panic - not syncing: Fatal hardware error!

Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of
interrupt context")

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
---
 drivers/firmware/efi/cper.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

James Morse July 25, 2019, 12:44 p.m. UTC | #1 
Hi,

On 12/07/2019 03:20, Xiaofei Tan wrote:
> AER info of PCIe fatal error is not printed in the current driver.
> Because APEI driver will panic directly for fatal error, and can't
> run to the place of printing AER info.
> 
> An example log is as following:
> [ 3157.655028] {763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
> [ 3157.663610] {763}[Hardware Error]: event severity: fatal
> [ 3157.663612] {763}[Hardware Error]:  Error 0, type: fatal
> [ 3157.663614] {763}[Hardware Error]:   section_type: PCIe error
> [ 3157.680328] {763}[Hardware Error]:   port_type: 0, PCIe end point
> [ 3157.680329] {763}[Hardware Error]:   version: 4.0
> [ 3157.680332] {763}[Hardware Error]:   command: 0x0000, status: 0x0010
> [ 3157.698757] {763}[Hardware Error]:   device_id: 0000:82:00.0
> [ 3157.698758] {763}[Hardware Error]:   slot: 0
> [ 3157.698759] {763}[Hardware Error]:   secondary_bus: 0x00
> [ 3157.698760] {763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
> [ 3157.698761] {763}[Hardware Error]:   class_code: 000002
> [ 3157.698825] Kernel panic - not syncing: Fatal hardware error!
> 
> This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
> cper_print_aer() call out of interrupt context")'. To fix this issue,
> this patch adds print of AER info in cper_print_pcie() for fatal error.
> 
> Here is the example log after this patch applied:
> [ 7032.893566] {24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
> [ 7032.901965] {24}[Hardware Error]: event severity: fatal
> [ 7032.907166] {24}[Hardware Error]:  Error 0, type: fatal
> [ 7032.912366] {24}[Hardware Error]:   section_type: PCIe error
> [ 7032.917998] {24}[Hardware Error]:   port_type: 0, PCIe end point
> [ 7032.923974] {24}[Hardware Error]:   version: 4.0
> [ 7032.928569] {24}[Hardware Error]:   command: 0x0546, status: 0x4010
> [ 7032.934806] {24}[Hardware Error]:   device_id: 0000:01:00.0
> [ 7032.940352] {24}[Hardware Error]:   slot: 0
> [ 7032.944514] {24}[Hardware Error]:   secondary_bus: 0x00
> [ 7032.949714] {24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
> [ 7032.956381] {24}[Hardware Error]:   class_code: 000002
> [ 7032.961495] {24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
> [ 7032.969891] {24}[Hardware Error]:   aer_uncor_severity: 0x00062010
> [ 7032.976042] {24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
> [ 7032.983663] Kernel panic - not syncing: Fatal hardware error!

> Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of
> interrupt context")

(Please put this all on one line)


> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> index 8fa977c..bf8600d 100644
> --- a/drivers/firmware/efi/cper.c
> +++ b/drivers/firmware/efi/cper.c
> @@ -390,6 +390,19 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
>  		printk(
>  	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
>  	pfx, pcie->bridge.secondary_status, pcie->bridge.control);

It may be worth a comment explaining why we only do this for fatal errors. Something like:
| /* Fatal errors call __ghes_panic() before the AER handler gets to print this */


> +	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO &&
> +	    gdata->error_severity & CPER_SEV_FATAL) {
> +		struct aer_capability_regs *aer;
> +
> +		aer = (struct aer_capability_regs *)pcie->aer_info;
> +		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",

The convention in the rest of the file is for the prefix format string to be separate. i.e:
| "%s""aer_uncor_status: ..."

Could it be the same for consistency?

> +		       pfx, aer->uncor_status, aer->uncor_mask);
> +		printk("%saer_uncor_severity: 0x%08x\n",
> +		       pfx, aer->uncor_severity);
> +		printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
> +		       aer->header_log.dw0, aer->header_log.dw1,
> +		       aer->header_log.dw2, aer->header_log.dw3);
> +	}
>  }

Regardless,
Reviewed-by; James Morse <james.morse@arm.com>


Thanks,

James
Xiaofei Tan July 25, 2019, 1:59 p.m. UTC | #2 
Hi James,
Thanks for the review.

On 2019/7/25 20:44, James Morse wrote:
> Hi,
> 
> On 12/07/2019 03:20, Xiaofei Tan wrote:
>> AER info of PCIe fatal error is not printed in the current driver.
>> Because APEI driver will panic directly for fatal error, and can't
>> run to the place of printing AER info.
>>
>> An example log is as following:
>> [ 3157.655028] {763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
>> [ 3157.663610] {763}[Hardware Error]: event severity: fatal
>> [ 3157.663612] {763}[Hardware Error]:  Error 0, type: fatal
>> [ 3157.663614] {763}[Hardware Error]:   section_type: PCIe error
>> [ 3157.680328] {763}[Hardware Error]:   port_type: 0, PCIe end point
>> [ 3157.680329] {763}[Hardware Error]:   version: 4.0
>> [ 3157.680332] {763}[Hardware Error]:   command: 0x0000, status: 0x0010
>> [ 3157.698757] {763}[Hardware Error]:   device_id: 0000:82:00.0
>> [ 3157.698758] {763}[Hardware Error]:   slot: 0
>> [ 3157.698759] {763}[Hardware Error]:   secondary_bus: 0x00
>> [ 3157.698760] {763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
>> [ 3157.698761] {763}[Hardware Error]:   class_code: 000002
>> [ 3157.698825] Kernel panic - not syncing: Fatal hardware error!
>>
>> This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
>> cper_print_aer() call out of interrupt context")'. To fix this issue,
>> this patch adds print of AER info in cper_print_pcie() for fatal error.
>>
>> Here is the example log after this patch applied:
>> [ 7032.893566] {24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
>> [ 7032.901965] {24}[Hardware Error]: event severity: fatal
>> [ 7032.907166] {24}[Hardware Error]:  Error 0, type: fatal
>> [ 7032.912366] {24}[Hardware Error]:   section_type: PCIe error
>> [ 7032.917998] {24}[Hardware Error]:   port_type: 0, PCIe end point
>> [ 7032.923974] {24}[Hardware Error]:   version: 4.0
>> [ 7032.928569] {24}[Hardware Error]:   command: 0x0546, status: 0x4010
>> [ 7032.934806] {24}[Hardware Error]:   device_id: 0000:01:00.0
>> [ 7032.940352] {24}[Hardware Error]:   slot: 0
>> [ 7032.944514] {24}[Hardware Error]:   secondary_bus: 0x00
>> [ 7032.949714] {24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
>> [ 7032.956381] {24}[Hardware Error]:   class_code: 000002
>> [ 7032.961495] {24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
>> [ 7032.969891] {24}[Hardware Error]:   aer_uncor_severity: 0x00062010
>> [ 7032.976042] {24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
>> [ 7032.983663] Kernel panic - not syncing: Fatal hardware error!
> 
>> Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of
>> interrupt context")
> 
> (Please put this all on one line)
> 

OK.

>> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
>> index 8fa977c..bf8600d 100644
>> --- a/drivers/firmware/efi/cper.c
>> +++ b/drivers/firmware/efi/cper.c
>> @@ -390,6 +390,19 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
>>  		printk(
>>  	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
>>  	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
> 
> It may be worth a comment explaining why we only do this for fatal errors. Something like:
> | /* Fatal errors call __ghes_panic() before the AER handler gets to print this */
> 

OK. I will add this comment.

> 
>> +	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO &&
>> +	    gdata->error_severity & CPER_SEV_FATAL) {
>> +		struct aer_capability_regs *aer;
>> +
>> +		aer = (struct aer_capability_regs *)pcie->aer_info;
>> +		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
> 
> The convention in the rest of the file is for the prefix format string to be separate. i.e:
> | "%s""aer_uncor_status: ..."
> 
> Could it be the same for consistency?
>

That way is not accepted by checkpatch.pl anymore, and was not used in some new commit.
Such as :
printk("%ssection_type: ARM processor error\n", newpfx);
and
printk("%ssection_type: IA32/X64 processor error\n", newpfx);

>> +		       pfx, aer->uncor_status, aer->uncor_mask);
>> +		printk("%saer_uncor_severity: 0x%08x\n",
>> +		       pfx, aer->uncor_severity);
>> +		printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
>> +		       aer->header_log.dw0, aer->header_log.dw1,
>> +		       aer->header_log.dw2, aer->header_log.dw3);
>> +	}
>>  }
> 
> Regardless,
> Reviewed-by; James Morse <james.morse@arm.com>
> 
> 
> Thanks,
> 
> James
> 
> .
>
diff mbox series

Patch

diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 8fa977c..bf8600d 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -390,6 +390,19 @@  static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 		printk(
 	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
 	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
+	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO &&
+	    gdata->error_severity & CPER_SEV_FATAL) {
+		struct aer_capability_regs *aer;
+
+		aer = (struct aer_capability_regs *)pcie->aer_info;
+		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
+		       pfx, aer->uncor_status, aer->uncor_mask);
+		printk("%saer_uncor_severity: 0x%08x\n",
+		       pfx, aer->uncor_severity);
+		printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
+		       aer->header_log.dw0, aer->header_log.dw1,
+		       aer->header_log.dw2, aer->header_log.dw3);
+	}
 }
 
 static void cper_print_tstamp(const char *pfx,