@@ -2495,12 +2495,11 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
return rv;
}
- printk(KERN_INFO
- "ipmi: Found new BMC (man_id: 0x%6.6x, "
- " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n",
- bmc->id.manufacturer_id,
- bmc->id.product_id,
- bmc->id.device_id);
+ dev_info(intf->si_dev, "Found new BMC (man_id: 0x%6.6x, "
+ "prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n",
+ bmc->id.manufacturer_id,
+ bmc->id.product_id,
+ bmc->id.device_id);
}
/*
@@ -573,9 +573,8 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
if (msg[2] != 0) {
/* Error clearing flags */
- printk(KERN_WARNING
- "ipmi_si: Error clearing flags: %2.2x\n",
- msg[2]);
+ dev_warn(smi_info->dev,
+ "Error clearing flags: %2.2x\n", msg[2]);
}
if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
start_enable_irq(smi_info);
@@ -667,9 +666,8 @@ static void handle_transaction_done(struct smi_info *smi_info)
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not enable interrupts"
- ", failed get, using polled mode.\n");
+ dev_warn(smi_info->dev, "Could not enable interrupts"
+ ", failed get, using polled mode.\n");
smi_info->si_state = SI_NORMAL;
} else {
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
@@ -691,9 +689,8 @@ static void handle_transaction_done(struct smi_info *smi_info)
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not enable interrupts"
- ", failed set, using polled mode.\n");
+ dev_warn(smi_info->dev, "Could not enable interrupts"
+ ", failed set, using polled mode.\n");
}
smi_info->si_state = SI_NORMAL;
break;
@@ -706,9 +703,8 @@ static void handle_transaction_done(struct smi_info *smi_info)
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not disable interrupts"
- ", failed get.\n");
+ dev_warn(smi_info->dev, "Could not disable interrupts"
+ ", failed get.\n");
smi_info->si_state = SI_NORMAL;
} else {
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
@@ -730,9 +726,8 @@ static void handle_transaction_done(struct smi_info *smi_info)
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not disable interrupts"
- ", failed set.\n");
+ dev_warn(smi_info->dev, "Could not disable interrupts"
+ ", failed set.\n");
}
smi_info->si_state = SI_NORMAL;
break;
@@ -1087,9 +1082,9 @@ static int smi_start_processing(void *send_info,
new_smi->thread = kthread_run(ipmi_thread, new_smi,
"kipmi%d", new_smi->intf_num);
if (IS_ERR(new_smi->thread)) {
- printk(KERN_NOTICE "ipmi_si_intf: Could not start"
- " kernel thread due to error %ld, only using"
- " timers to drive the interface\n",
+ dev_notice(new_smi->dev, "Could not start"
+ " kernel thread due to error %ld, only using"
+ " timers to drive the interface\n",
PTR_ERR(new_smi->thread));
new_smi->thread = NULL;
}
@@ -1752,6 +1747,8 @@ static __devinit void hardcode_find_bmc(void)
return;
info->addr_source = "hardcoded";
+ printk(KERN_INFO "ipmi_si: probing via %s\n",
+ info->addr_source);
if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
info->si_type = SI_KCS;
@@ -1871,6 +1868,7 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
{
struct acpi_device *acpi_dev;
struct smi_info *info;
+ struct resource *res;
acpi_handle handle;
acpi_status status;
unsigned long long tmp;
@@ -1884,6 +1882,7 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
return -ENOMEM;
info->addr_source = "ACPI";
+ dev_info(&dev->dev, "probing via %s\n", info->addr_source);
handle = acpi_dev->handle;
@@ -1903,22 +1902,26 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
info->si_type = SI_BT;
break;
default:
- dev_info(&dev->dev, "unknown interface type %lld\n", tmp);
+ dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
goto err_free;
}
- if (pnp_port_valid(dev, 0)) {
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (res) {
info->io_setup = port_setup;
info->io.addr_type = IPMI_IO_ADDR_SPACE;
- info->io.addr_data = pnp_port_start(dev, 0);
- } else if (pnp_mem_valid(dev, 0)) {
- info->io_setup = mem_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
- info->io.addr_data = pnp_mem_start(dev, 0);
} else {
+ res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res) {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ }
+ }
+ if (!res) {
dev_err(&dev->dev, "no I/O or memory address\n");
goto err_free;
}
+ info->io.addr_data = res->start;
info->io.regspacing = DEFAULT_REGSPACING;
info->io.regsize = DEFAULT_REGSPACING;
@@ -1937,6 +1940,10 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
info->dev = &dev->dev;
pnp_set_drvdata(dev, info);
+ dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
+ res, info->io.regsize, info->io.regspacing,
+ info->irq);
+
return try_smi_init(info);
err_free:
@@ -2048,6 +2055,7 @@ static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
}
info->addr_source = "SMBIOS";
+ printk(KERN_INFO "ipmi_si: probing via %s\n", info->addr_source);
switch (ipmi_data->type) {
case 0x01: /* KCS */
@@ -2147,6 +2155,7 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
return -ENOMEM;
info->addr_source = "PCI";
+ dev_info(&pdev->dev, "probing via %s\n", info->addr_source);
switch (class_type) {
case PCI_ERMC_CLASSCODE_TYPE_SMIC:
@@ -2163,15 +2172,13 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
default:
kfree(info);
- printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n",
- pci_name(pdev), class_type);
+ dev_info(&pdev->dev, "Unknown IPMI type: %d\n", class_type);
return -ENOMEM;
}
rv = pci_enable_device(pdev);
if (rv) {
- printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "couldn't enable PCI device\n");
kfree(info);
return rv;
}
@@ -2199,6 +2206,10 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
info->dev = &pdev->dev;
pci_set_drvdata(pdev, info);
+ dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n",
+ &pdev->resource[0], info->io.regsize, info->io.regspacing,
+ info->irq);
+
return try_smi_init(info);
}
@@ -2306,7 +2317,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev,
info->irq = irq_of_parse_and_map(dev->node, 0);
info->dev = &dev->dev;
- dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n",
+ dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %d\n",
info->io.addr_data, info->io.regsize, info->io.regspacing,
info->irq);
@@ -2769,17 +2780,6 @@ static int try_smi_init(struct smi_info *new_smi)
int rv;
int i;
- if (new_smi->addr_source) {
- printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
- " machine at %s address 0x%lx, slave address 0x%x,"
- " irq %d\n",
- new_smi->addr_source,
- si_to_str[new_smi->si_type],
- addr_space_to_str[new_smi->io.addr_type],
- new_smi->io.addr_data,
- new_smi->slave_addr, new_smi->irq);
- }
-
mutex_lock(&smi_infos_lock);
if (!is_new_interface(new_smi)) {
printk(KERN_WARNING "ipmi_si: duplicate interface\n");
@@ -2916,9 +2916,8 @@ static int try_smi_init(struct smi_info *new_smi)
"bmc",
new_smi->slave_addr);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to register device: error %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to register device: error %d\n",
+ rv);
goto out_err_stop_timer;
}
@@ -2926,9 +2925,7 @@ static int try_smi_init(struct smi_info *new_smi)
type_file_read_proc,
new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
@@ -2936,9 +2933,7 @@ static int try_smi_init(struct smi_info *new_smi)
stat_file_read_proc,
new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
@@ -2946,9 +2941,7 @@ static int try_smi_init(struct smi_info *new_smi)
param_read_proc,
new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
@@ -2956,8 +2949,8 @@ static int try_smi_init(struct smi_info *new_smi)
mutex_unlock(&smi_infos_lock);
- printk(KERN_INFO "IPMI %s interface initialized\n",
- si_to_str[new_smi->si_type]);
+ dev_info(new_smi->dev, "IPMI %s interface initialized\n",
+ si_to_str[new_smi->si_type]);
return 0;