@@ -802,8 +802,7 @@ AcpiExExtractFromField (
/* Validate target buffer and clear it */
- if (BufferLength <
- ACPI_ROUND_BITS_UP_TO_BYTES (ObjDesc->CommonField.BitLength))
+ if (BufferLength < ACPI_ROUND_BITS_UP_TO_BYTES (ObjDesc->CommonField.BitLength))
{
ACPI_ERROR ((AE_INFO,
"Field size %u (bits) is too large for buffer (%u)",
@@ -813,15 +812,31 @@ AcpiExExtractFromField (
}
ACPI_MEMSET (Buffer, 0, BufferLength);
+ /* Simple case handling */
+
+ if (ObjDesc->CommonField.StartFieldBitOffset == 0 &&
+ ObjDesc->CommonField.BitLength ==
+ 8 * ObjDesc->CommonField.AccessByteWidth)
+ {
+ Status = AcpiExFieldDatumIo (ObjDesc, 0, Buffer, ACPI_READ);
+ return_ACPI_STATUS(Status);
+ }
+
+ /* Algo is limited to sizeof(UINT64), so cut the AccessByteWidth */
+ if (ObjDesc->CommonField.AccessByteWidth > sizeof(UINT64))
+ {
+ ObjDesc->CommonField.AccessByteWidth = sizeof(UINT64);
+ }
+
/* Compute the number of datums (access width data items) */
DatumCount = ACPI_ROUND_UP_TO (
ObjDesc->CommonField.BitLength,
- ObjDesc->CommonField.AccessBitWidth);
+ ObjDesc->CommonField.AccessByteWidth * 8);
FieldDatumCount = ACPI_ROUND_UP_TO (
ObjDesc->CommonField.BitLength +
ObjDesc->CommonField.StartFieldBitOffset,
- ObjDesc->CommonField.AccessBitWidth);
+ ObjDesc->CommonField.AccessByteWidth * 8);
/* Priming read from the field */
@@ -854,11 +869,11 @@ AcpiExExtractFromField (
* This avoids the differences in behavior between different compilers
* concerning shift values larger than the target data width.
*/
- if ((ObjDesc->CommonField.AccessBitWidth -
+ if ((ObjDesc->CommonField.AccessByteWidth * 8 -
ObjDesc->CommonField.StartFieldBitOffset) < ACPI_INTEGER_BIT_SIZE)
{
MergedDatum |= RawDatum <<
- (ObjDesc->CommonField.AccessBitWidth -
+ (ObjDesc->CommonField.AccessByteWidth * 8 -
ObjDesc->CommonField.StartFieldBitOffset);
}
@@ -880,7 +895,7 @@ AcpiExExtractFromField (
/* Mask off any extra bits in the last datum */
BufferTailBits = ObjDesc->CommonField.BitLength %
- ObjDesc->CommonField.AccessBitWidth;
+ (ObjDesc->CommonField.AccessByteWidth * 8);
if (BufferTailBits)
{
MergedDatum &= ACPI_MASK_BITS_ABOVE (BufferTailBits);
@@ -965,18 +980,24 @@ AcpiExInsertIntoField (
BufferLength = RequiredLength;
}
+ /* Algo is limited to sizeof(UINT64), so cut the AccessByteWidth */
+ if (ObjDesc->CommonField.AccessByteWidth > sizeof(UINT64))
+ {
+ ObjDesc->CommonField.AccessByteWidth = sizeof(UINT64);
+ }
+
/*
* Create the bitmasks used for bit insertion.
* Note: This if/else is used to bypass compiler differences with the
* shift operator
*/
- if (ObjDesc->CommonField.AccessBitWidth == ACPI_INTEGER_BIT_SIZE)
+ if (ObjDesc->CommonField.AccessByteWidth * 8 == ACPI_INTEGER_BIT_SIZE)
{
WidthMask = ACPI_UINT64_MAX;
}
else
{
- WidthMask = ACPI_MASK_BITS_ABOVE (ObjDesc->CommonField.AccessBitWidth);
+ WidthMask = ACPI_MASK_BITS_ABOVE (ObjDesc->CommonField.AccessByteWidth * 8);
}
Mask = WidthMask &
@@ -985,11 +1006,11 @@ AcpiExInsertIntoField (
/* Compute the number of datums (access width data items) */
DatumCount = ACPI_ROUND_UP_TO (ObjDesc->CommonField.BitLength,
- ObjDesc->CommonField.AccessBitWidth);
+ ObjDesc->CommonField.AccessByteWidth * 8);
FieldDatumCount = ACPI_ROUND_UP_TO (ObjDesc->CommonField.BitLength +
ObjDesc->CommonField.StartFieldBitOffset,
- ObjDesc->CommonField.AccessBitWidth);
+ ObjDesc->CommonField.AccessByteWidth * 8);
/* Get initial Datum from the input buffer */
@@ -1024,11 +1045,11 @@ AcpiExInsertIntoField (
* This avoids the differences in behavior between different compilers
* concerning shift values larger than the target data width.
*/
- if ((ObjDesc->CommonField.AccessBitWidth -
+ if ((ObjDesc->CommonField.AccessByteWidth * 8 -
ObjDesc->CommonField.StartFieldBitOffset) < ACPI_INTEGER_BIT_SIZE)
{
MergedDatum = RawDatum >>
- (ObjDesc->CommonField.AccessBitWidth -
+ (ObjDesc->CommonField.AccessByteWidth * 8 -
ObjDesc->CommonField.StartFieldBitOffset);
}
else
@@ -1056,7 +1077,7 @@ AcpiExInsertIntoField (
BufferTailBits = (ObjDesc->CommonField.BitLength +
ObjDesc->CommonField.StartFieldBitOffset) %
- ObjDesc->CommonField.AccessBitWidth;
+ (ObjDesc->CommonField.AccessByteWidth * 8);
if (BufferTailBits)
{
Mask &= ACPI_MASK_BITS_ABOVE (BufferTailBits);
@@ -455,8 +455,6 @@ AcpiExPrepCommonFieldObject (
ObjDesc->CommonField.AccessByteWidth = (UINT8)
ACPI_DIV_8 (AccessBitWidth); /* 1, 2, 4, 8 */
- ObjDesc->CommonField.AccessBitWidth = (UINT8) AccessBitWidth;
-
/*
* BaseByteOffset is the address of the start of the field within the
* region. It is the byte address of the first *datum* (field-width data
@@ -567,6 +565,16 @@ AcpiExPrepFieldValue (
ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode);
+ /* allow full data read from EC address space */
+ if (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) {
+ if (ObjDesc->CommonField.BitLength > 8) {
+ ObjDesc->CommonField.AccessByteWidth =
+ ACPI_ROUND_BITS_UP_TO_BYTES(ObjDesc->CommonField.BitLength);
+ }
+ }
+
+
+
/* An additional reference for the container */
AcpiUtAddReference (ObjDesc->Field.RegionObj);
@@ -381,12 +381,11 @@ typedef struct acpi_object_thermal_zone
UINT8 FieldFlags; /* Access, update, and lock bits */\
UINT8 Attribute; /* From AccessAs keyword */\
UINT8 AccessByteWidth; /* Read/Write size in bytes */\
+ UINT8 StartFieldBitOffset;/* Bit offset within first field datum (0-63) */\
ACPI_NAMESPACE_NODE *Node; /* Link back to parent node */\
UINT32 BitLength; /* Length of field in bits */\
UINT32 BaseByteOffset; /* Byte offset within containing object */\
UINT32 Value; /* Value to store into the Bank or Index register */\
- UINT8 StartFieldBitOffset;/* Bit offset within first field datum (0-63) */\
- UINT8 AccessBitWidth; /* Read/Write size in bits (8-64) */
typedef struct acpi_object_field_common /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */