===================================================================
@@ -0,0 +1,462 @@
+/*
+ * PCIe Native PME support
+ *
+ * Copyright (C) 2007 - 2009 Intel Corp
+ * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/pcieport_if.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
+
+#include "../pci.h"
+#include "portdrv.h"
+
+#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+
+/*
+ * If this switch is set, MSI will not be used for PCIe PME signaling. This
+ * causes the PCIe port driver to use INTx interrupts only, but it turns out
+ * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
+ * wake-up from system sleep states.
+ */
+bool pcie_pme_msi_disabled;
+
+static int __init pcie_pme_setup(char *str)
+{
+ if (!strncmp(str, "nomsi", 5))
+ pcie_pme_msi_disabled = true;
+
+ return 1;
+}
+__setup("pcie_pme=", pcie_pme_setup);
+
+struct pcie_pme_service_data {
+ spinlock_t lock;
+ struct pcie_device *srv;
+ struct work_struct work;
+ bool noirq; /* Don't enable the PME interrupt used by this service. */
+};
+
+/**
+ * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
+ * @dev: PCIe root port or event collector.
+ * @enable: Enable or disable the interrupt.
+ */
+void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+{
+ int rtctl_pos;
+ u16 rtctl;
+
+ rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
+
+ pci_read_config_word(dev, rtctl_pos, &rtctl);
+ if (enable)
+ rtctl |= PCI_EXP_RTCTL_PMEIE;
+ else
+ rtctl &= ~PCI_EXP_RTCTL_PMEIE;
+ pci_write_config_word(dev, rtctl_pos, rtctl);
+}
+
+/**
+ * pcie_pme_clear_status - Clear root port PME interrupt status.
+ * @dev: PCIe root port or event collector.
+ */
+static void pcie_pme_clear_status(struct pci_dev *dev)
+{
+ int rtsta_pos;
+ u32 rtsta;
+
+ rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
+
+ pci_read_config_dword(dev, rtsta_pos, &rtsta);
+ rtsta |= PCI_EXP_RTSTA_PME;
+ pci_write_config_dword(dev, rtsta_pos, rtsta);
+}
+
+/**
+ * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
+ * @bus: PCI bus to scan.
+ *
+ * Scan given PCI bus and all buses under it for devices asserting PME#.
+ */
+static bool pcie_pme_walk_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ bool ret = false;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ /* Skip PCIe devices in case we started from a root port. */
+ if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+ pm_request_resume(&dev->dev);
+ pci_wakeup_event(dev);
+ ret = true;
+ }
+
+ if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
+ ret = true;
+ }
+
+ return ret;
+}
+
+/**
+ * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
+ * @bus: Secondary bus of the bridge.
+ * @devfn: Device/function number to check.
+ *
+ * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
+ * PCIe PME message. In such that case the bridge should use the Requester ID
+ * of device/function number 0 on its secondary bus.
+ */
+static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
+{
+ struct pci_dev *dev;
+ bool found = false;
+
+ if (devfn)
+ return false;
+
+ dev = pci_dev_get(bus->self);
+ if (!dev)
+ return false;
+
+ if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
+ down_read(&pci_bus_sem);
+ if (pcie_pme_walk_bus(bus))
+ found = true;
+ up_read(&pci_bus_sem);
+ }
+
+ pci_dev_put(dev);
+ return found;
+}
+
+/**
+ * pcie_pme_handle_request - Find device that generated PME and handle it.
+ * @port: Root port or event collector that generated the PME interrupt.
+ * @req_id: PCIe Requester ID of the device that generated the PME.
+ */
+static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
+{
+ u8 busnr = req_id >> 8, devfn = req_id & 0xff;
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ bool found = false;
+
+ /* First, check if the PME is from the root port itself. */
+ if (port->devfn == devfn && port->bus->number == busnr) {
+ if (pci_check_pme_status(port)) {
+ pm_request_resume(&port->dev);
+ found = true;
+ } else {
+ /*
+ * Apparently, the root port generated the PME on behalf
+ * of a non-PCIe device downstream. If this is done by
+ * a root port, the Requester ID field in its status
+ * register may contain either the root port's, or the
+ * source device's information (PCI Express Base
+ * Specification, Rev. 2.0, Section 6.1.9).
+ */
+ down_read(&pci_bus_sem);
+ found = pcie_pme_walk_bus(port->subordinate);
+ up_read(&pci_bus_sem);
+ }
+ goto out;
+ }
+
+ /* Second, find the bus the source device is on. */
+ bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
+ if (!bus)
+ goto out;
+
+ /* Next, check if the PME is from a PCIe-PCI bridge. */
+ found = pcie_pme_from_pci_bridge(bus, devfn);
+ if (found)
+ goto out;
+
+ /* Finally, try to find the PME source on the bus. */
+ down_read(&pci_bus_sem);
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pci_dev_get(dev);
+ if (dev->devfn == devfn) {
+ found = true;
+ break;
+ }
+ pci_dev_put(dev);
+ }
+ up_read(&pci_bus_sem);
+
+ if (found) {
+ /* The device is there, but we have to check its PME status. */
+ found = pci_check_pme_status(dev);
+ if (found) {
+ pm_request_resume(&dev->dev);
+ pci_wakeup_event(dev);
+ }
+ pci_dev_put(dev);
+ } else if (devfn) {
+ /*
+ * The device is not there, but we can still try to recover by
+ * assuming that the PME was reported by a PCIe-PCI bridge that
+ * used devfn different from zero.
+ */
+ dev_dbg(&port->dev, "PME interrupt generated for "
+ "non-existent device %02x:%02x.%d\n",
+ busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ found = pcie_pme_from_pci_bridge(bus, 0);
+ }
+
+ out:
+ if (!found)
+ dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
+}
+
+/**
+ * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
+ * @work: Work structure giving access to service data.
+ */
+static void pcie_pme_work_fn(struct work_struct *work)
+{
+ struct pcie_pme_service_data *data =
+ container_of(work, struct pcie_pme_service_data, work);
+ struct pci_dev *port = data->srv->port;
+ int rtsta_pos;
+ u32 rtsta;
+
+ rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+ spin_lock_irq(&data->lock);
+
+ for (;;) {
+ if (data->noirq)
+ break;
+
+ pci_read_config_dword(port, rtsta_pos, &rtsta);
+ if (rtsta & PCI_EXP_RTSTA_PME) {
+ /*
+ * Clear PME status of the port. If there are other
+ * pending PMEs, the status will be set again.
+ */
+ pcie_pme_clear_status(port);
+
+ spin_unlock_irq(&data->lock);
+ pcie_pme_handle_request(port, rtsta & 0xffff);
+ spin_lock_irq(&data->lock);
+
+ continue;
+ }
+
+ /* No need to loop if there are no more PMEs pending. */
+ if (!(rtsta & PCI_EXP_RTSTA_PENDING))
+ break;
+
+ spin_unlock_irq(&data->lock);
+ cpu_relax();
+ spin_lock_irq(&data->lock);
+ }
+
+ if (!data->noirq)
+ pcie_pme_interrupt_enable(port, true);
+
+ spin_unlock_irq(&data->lock);
+}
+
+/**
+ * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
+ * @irq: Interrupt vector.
+ * @context: Interrupt context pointer.
+ */
+static irqreturn_t pcie_pme_irq(int irq, void *context)
+{
+ struct pci_dev *port;
+ struct pcie_pme_service_data *data;
+ int rtsta_pos;
+ u32 rtsta;
+ unsigned long flags;
+
+ port = ((struct pcie_device *)context)->port;
+ data = get_service_data((struct pcie_device *)context);
+
+ rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+ spin_lock_irqsave(&data->lock, flags);
+ pci_read_config_dword(port, rtsta_pos, &rtsta);
+
+ if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+ spin_unlock_irqrestore(&data->lock, flags);
+ return IRQ_NONE;
+ }
+
+ pcie_pme_interrupt_enable(port, false);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ /* We don't use pm_wq, because it's freezable. */
+ schedule_work(&data->work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * pcie_pme_set_native - Set the PME interrupt flag for given device.
+ * @dev: PCI device to handle.
+ * @ign: Ignored.
+ */
+static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
+{
+ dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");
+
+ device_set_run_wake(&dev->dev, true);
+ dev->pme_interrupt = true;
+ return 0;
+}
+
+/**
+ * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
+ * @port: PCIe root port or event collector to handle.
+ *
+ * For each device below given root port, including the port itself (or for each
+ * root complex integrated endpoint if @port is a root complex event collector)
+ * set the flag indicating that it can signal run-time wake-up events via PCIe
+ * PME interrupts.
+ */
+static void pcie_pme_mark_devices(struct pci_dev *port)
+{
+ pcie_pme_set_native(port, NULL);
+ if (port->subordinate) {
+ pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
+ } else {
+ struct pci_bus *bus = port->bus;
+ struct pci_dev *dev;
+
+ /* Check if this is a root port event collector. */
+ if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
+ return;
+
+ down_read(&pci_bus_sem);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (pci_is_pcie(dev)
+ && dev->pcie_type == PCI_EXP_TYPE_RC_END)
+ pcie_pme_set_native(dev, NULL);
+ up_read(&pci_bus_sem);
+ }
+}
+
+/**
+ * pcie_pme_probe - Initialize PCIe PME service for given root port.
+ * @srv: PCIe service to initialize.
+ */
+static int pcie_pme_probe(struct pcie_device *srv)
+{
+ struct pci_dev *port;
+ struct pcie_pme_service_data *data;
+ int ret;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+ INIT_WORK(&data->work, pcie_pme_work_fn);
+ data->srv = srv;
+ set_service_data(srv, data);
+
+ port = srv->port;
+ pcie_pme_interrupt_enable(port, false);
+ pcie_pme_clear_status(port);
+
+ ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
+ if (ret) {
+ kfree(data);
+ } else {
+ pcie_pme_mark_devices(port);
+ pcie_pme_interrupt_enable(port, true);
+ }
+
+ return ret;
+}
+
+/**
+ * pcie_pme_suspend - Suspend PCIe PME service device.
+ * @srv: PCIe service device to suspend.
+ */
+static int pcie_pme_suspend(struct pcie_device *srv)
+{
+ struct pcie_pme_service_data *data = get_service_data(srv);
+ struct pci_dev *port = srv->port;
+
+ spin_lock_irq(&data->lock);
+ pcie_pme_interrupt_enable(port, false);
+ pcie_pme_clear_status(port);
+ data->noirq = true;
+ spin_unlock_irq(&data->lock);
+
+ synchronize_irq(srv->irq);
+
+ return 0;
+}
+
+/**
+ * pcie_pme_resume - Resume PCIe PME service device.
+ * @srv - PCIe service device to resume.
+ */
+static int pcie_pme_resume(struct pcie_device *srv)
+{
+ struct pcie_pme_service_data *data = get_service_data(srv);
+ struct pci_dev *port = srv->port;
+
+ spin_lock_irq(&data->lock);
+ data->noirq = false;
+ pcie_pme_clear_status(port);
+ pcie_pme_interrupt_enable(port, true);
+ spin_unlock_irq(&data->lock);
+
+ return 0;
+}
+
+/**
+ * pcie_pme_remove - Prepare PCIe PME service device for removal.
+ * @srv - PCIe service device to resume.
+ */
+static void pcie_pme_remove(struct pcie_device *srv)
+{
+ pcie_pme_suspend(srv);
+ free_irq(srv->irq, srv);
+ kfree(get_service_data(srv));
+}
+
+static struct pcie_port_service_driver pcie_pme_driver = {
+ .name = "pcie_pme",
+ .port_type = PCI_EXP_TYPE_ROOT_PORT,
+ .service = PCIE_PORT_SERVICE_PME,
+
+ .probe = pcie_pme_probe,
+ .suspend = pcie_pme_suspend,
+ .resume = pcie_pme_resume,
+ .remove = pcie_pme_remove,
+};
+
+/**
+ * pcie_pme_service_init - Register the PCIe PME service driver.
+ */
+static int __init pcie_pme_service_init(void)
+{
+ return pcie_port_service_register(&pcie_pme_driver);
+}
+
+module_init(pcie_pme_service_init);
===================================================================
@@ -1,462 +0,0 @@
-/*
- * PCIe Native PME support
- *
- * Copyright (C) 2007 - 2009 Intel Corp
- * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
- * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License V2. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/pcieport_if.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
-#include <linux/pm_runtime.h>
-
-#include "../../pci.h"
-#include "../portdrv.h"
-
-#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
-
-/*
- * If this switch is set, MSI will not be used for PCIe PME signaling. This
- * causes the PCIe port driver to use INTx interrupts only, but it turns out
- * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
- * wake-up from system sleep states.
- */
-bool pcie_pme_msi_disabled;
-
-static int __init pcie_pme_setup(char *str)
-{
- if (!strncmp(str, "nomsi", 5))
- pcie_pme_msi_disabled = true;
-
- return 1;
-}
-__setup("pcie_pme=", pcie_pme_setup);
-
-struct pcie_pme_service_data {
- spinlock_t lock;
- struct pcie_device *srv;
- struct work_struct work;
- bool noirq; /* Don't enable the PME interrupt used by this service. */
-};
-
-/**
- * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
- * @dev: PCIe root port or event collector.
- * @enable: Enable or disable the interrupt.
- */
-void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
-{
- int rtctl_pos;
- u16 rtctl;
-
- rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
-
- pci_read_config_word(dev, rtctl_pos, &rtctl);
- if (enable)
- rtctl |= PCI_EXP_RTCTL_PMEIE;
- else
- rtctl &= ~PCI_EXP_RTCTL_PMEIE;
- pci_write_config_word(dev, rtctl_pos, rtctl);
-}
-
-/**
- * pcie_pme_clear_status - Clear root port PME interrupt status.
- * @dev: PCIe root port or event collector.
- */
-static void pcie_pme_clear_status(struct pci_dev *dev)
-{
- int rtsta_pos;
- u32 rtsta;
-
- rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
-
- pci_read_config_dword(dev, rtsta_pos, &rtsta);
- rtsta |= PCI_EXP_RTSTA_PME;
- pci_write_config_dword(dev, rtsta_pos, rtsta);
-}
-
-/**
- * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
- * @bus: PCI bus to scan.
- *
- * Scan given PCI bus and all buses under it for devices asserting PME#.
- */
-static bool pcie_pme_walk_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev;
- bool ret = false;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- /* Skip PCIe devices in case we started from a root port. */
- if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
- pm_request_resume(&dev->dev);
- pci_wakeup_event(dev);
- ret = true;
- }
-
- if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
- ret = true;
- }
-
- return ret;
-}
-
-/**
- * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
- * @bus: Secondary bus of the bridge.
- * @devfn: Device/function number to check.
- *
- * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
- * PCIe PME message. In such that case the bridge should use the Requester ID
- * of device/function number 0 on its secondary bus.
- */
-static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
-{
- struct pci_dev *dev;
- bool found = false;
-
- if (devfn)
- return false;
-
- dev = pci_dev_get(bus->self);
- if (!dev)
- return false;
-
- if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
- down_read(&pci_bus_sem);
- if (pcie_pme_walk_bus(bus))
- found = true;
- up_read(&pci_bus_sem);
- }
-
- pci_dev_put(dev);
- return found;
-}
-
-/**
- * pcie_pme_handle_request - Find device that generated PME and handle it.
- * @port: Root port or event collector that generated the PME interrupt.
- * @req_id: PCIe Requester ID of the device that generated the PME.
- */
-static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
-{
- u8 busnr = req_id >> 8, devfn = req_id & 0xff;
- struct pci_bus *bus;
- struct pci_dev *dev;
- bool found = false;
-
- /* First, check if the PME is from the root port itself. */
- if (port->devfn == devfn && port->bus->number == busnr) {
- if (pci_check_pme_status(port)) {
- pm_request_resume(&port->dev);
- found = true;
- } else {
- /*
- * Apparently, the root port generated the PME on behalf
- * of a non-PCIe device downstream. If this is done by
- * a root port, the Requester ID field in its status
- * register may contain either the root port's, or the
- * source device's information (PCI Express Base
- * Specification, Rev. 2.0, Section 6.1.9).
- */
- down_read(&pci_bus_sem);
- found = pcie_pme_walk_bus(port->subordinate);
- up_read(&pci_bus_sem);
- }
- goto out;
- }
-
- /* Second, find the bus the source device is on. */
- bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
- if (!bus)
- goto out;
-
- /* Next, check if the PME is from a PCIe-PCI bridge. */
- found = pcie_pme_from_pci_bridge(bus, devfn);
- if (found)
- goto out;
-
- /* Finally, try to find the PME source on the bus. */
- down_read(&pci_bus_sem);
- list_for_each_entry(dev, &bus->devices, bus_list) {
- pci_dev_get(dev);
- if (dev->devfn == devfn) {
- found = true;
- break;
- }
- pci_dev_put(dev);
- }
- up_read(&pci_bus_sem);
-
- if (found) {
- /* The device is there, but we have to check its PME status. */
- found = pci_check_pme_status(dev);
- if (found) {
- pm_request_resume(&dev->dev);
- pci_wakeup_event(dev);
- }
- pci_dev_put(dev);
- } else if (devfn) {
- /*
- * The device is not there, but we can still try to recover by
- * assuming that the PME was reported by a PCIe-PCI bridge that
- * used devfn different from zero.
- */
- dev_dbg(&port->dev, "PME interrupt generated for "
- "non-existent device %02x:%02x.%d\n",
- busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
- found = pcie_pme_from_pci_bridge(bus, 0);
- }
-
- out:
- if (!found)
- dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
-}
-
-/**
- * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
- * @work: Work structure giving access to service data.
- */
-static void pcie_pme_work_fn(struct work_struct *work)
-{
- struct pcie_pme_service_data *data =
- container_of(work, struct pcie_pme_service_data, work);
- struct pci_dev *port = data->srv->port;
- int rtsta_pos;
- u32 rtsta;
-
- rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
-
- spin_lock_irq(&data->lock);
-
- for (;;) {
- if (data->noirq)
- break;
-
- pci_read_config_dword(port, rtsta_pos, &rtsta);
- if (rtsta & PCI_EXP_RTSTA_PME) {
- /*
- * Clear PME status of the port. If there are other
- * pending PMEs, the status will be set again.
- */
- pcie_pme_clear_status(port);
-
- spin_unlock_irq(&data->lock);
- pcie_pme_handle_request(port, rtsta & 0xffff);
- spin_lock_irq(&data->lock);
-
- continue;
- }
-
- /* No need to loop if there are no more PMEs pending. */
- if (!(rtsta & PCI_EXP_RTSTA_PENDING))
- break;
-
- spin_unlock_irq(&data->lock);
- cpu_relax();
- spin_lock_irq(&data->lock);
- }
-
- if (!data->noirq)
- pcie_pme_interrupt_enable(port, true);
-
- spin_unlock_irq(&data->lock);
-}
-
-/**
- * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
- * @irq: Interrupt vector.
- * @context: Interrupt context pointer.
- */
-static irqreturn_t pcie_pme_irq(int irq, void *context)
-{
- struct pci_dev *port;
- struct pcie_pme_service_data *data;
- int rtsta_pos;
- u32 rtsta;
- unsigned long flags;
-
- port = ((struct pcie_device *)context)->port;
- data = get_service_data((struct pcie_device *)context);
-
- rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
-
- spin_lock_irqsave(&data->lock, flags);
- pci_read_config_dword(port, rtsta_pos, &rtsta);
-
- if (!(rtsta & PCI_EXP_RTSTA_PME)) {
- spin_unlock_irqrestore(&data->lock, flags);
- return IRQ_NONE;
- }
-
- pcie_pme_interrupt_enable(port, false);
- spin_unlock_irqrestore(&data->lock, flags);
-
- /* We don't use pm_wq, because it's freezable. */
- schedule_work(&data->work);
-
- return IRQ_HANDLED;
-}
-
-/**
- * pcie_pme_set_native - Set the PME interrupt flag for given device.
- * @dev: PCI device to handle.
- * @ign: Ignored.
- */
-static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
-{
- dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");
-
- device_set_run_wake(&dev->dev, true);
- dev->pme_interrupt = true;
- return 0;
-}
-
-/**
- * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
- * @port: PCIe root port or event collector to handle.
- *
- * For each device below given root port, including the port itself (or for each
- * root complex integrated endpoint if @port is a root complex event collector)
- * set the flag indicating that it can signal run-time wake-up events via PCIe
- * PME interrupts.
- */
-static void pcie_pme_mark_devices(struct pci_dev *port)
-{
- pcie_pme_set_native(port, NULL);
- if (port->subordinate) {
- pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
- } else {
- struct pci_bus *bus = port->bus;
- struct pci_dev *dev;
-
- /* Check if this is a root port event collector. */
- if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
- return;
-
- down_read(&pci_bus_sem);
- list_for_each_entry(dev, &bus->devices, bus_list)
- if (pci_is_pcie(dev)
- && dev->pcie_type == PCI_EXP_TYPE_RC_END)
- pcie_pme_set_native(dev, NULL);
- up_read(&pci_bus_sem);
- }
-}
-
-/**
- * pcie_pme_probe - Initialize PCIe PME service for given root port.
- * @srv: PCIe service to initialize.
- */
-static int pcie_pme_probe(struct pcie_device *srv)
-{
- struct pci_dev *port;
- struct pcie_pme_service_data *data;
- int ret;
-
- data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- spin_lock_init(&data->lock);
- INIT_WORK(&data->work, pcie_pme_work_fn);
- data->srv = srv;
- set_service_data(srv, data);
-
- port = srv->port;
- pcie_pme_interrupt_enable(port, false);
- pcie_pme_clear_status(port);
-
- ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
- if (ret) {
- kfree(data);
- } else {
- pcie_pme_mark_devices(port);
- pcie_pme_interrupt_enable(port, true);
- }
-
- return ret;
-}
-
-/**
- * pcie_pme_suspend - Suspend PCIe PME service device.
- * @srv: PCIe service device to suspend.
- */
-static int pcie_pme_suspend(struct pcie_device *srv)
-{
- struct pcie_pme_service_data *data = get_service_data(srv);
- struct pci_dev *port = srv->port;
-
- spin_lock_irq(&data->lock);
- pcie_pme_interrupt_enable(port, false);
- pcie_pme_clear_status(port);
- data->noirq = true;
- spin_unlock_irq(&data->lock);
-
- synchronize_irq(srv->irq);
-
- return 0;
-}
-
-/**
- * pcie_pme_resume - Resume PCIe PME service device.
- * @srv - PCIe service device to resume.
- */
-static int pcie_pme_resume(struct pcie_device *srv)
-{
- struct pcie_pme_service_data *data = get_service_data(srv);
- struct pci_dev *port = srv->port;
-
- spin_lock_irq(&data->lock);
- data->noirq = false;
- pcie_pme_clear_status(port);
- pcie_pme_interrupt_enable(port, true);
- spin_unlock_irq(&data->lock);
-
- return 0;
-}
-
-/**
- * pcie_pme_remove - Prepare PCIe PME service device for removal.
- * @srv - PCIe service device to resume.
- */
-static void pcie_pme_remove(struct pcie_device *srv)
-{
- pcie_pme_suspend(srv);
- free_irq(srv->irq, srv);
- kfree(get_service_data(srv));
-}
-
-static struct pcie_port_service_driver pcie_pme_driver = {
- .name = "pcie_pme",
- .port_type = PCI_EXP_TYPE_ROOT_PORT,
- .service = PCIE_PORT_SERVICE_PME,
-
- .probe = pcie_pme_probe,
- .suspend = pcie_pme_suspend,
- .resume = pcie_pme_resume,
- .remove = pcie_pme_remove,
-};
-
-/**
- * pcie_pme_service_init - Register the PCIe PME service driver.
- */
-static int __init pcie_pme_service_init(void)
-{
- return pcie_port_service_register(&pcie_pme_driver);
-}
-
-module_init(pcie_pme_service_init);
===================================================================
@@ -1,5 +0,0 @@
-#
-# Makefile for PCI-Express Root Port PME signaling driver
-#
-
-obj-$(CONFIG_PCIE_PME) += pcie_pme.o
===================================================================
@@ -13,4 +13,4 @@ obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv
# Build PCI Express AER if needed
obj-$(CONFIG_PCIEAER) += aer/
-obj-$(CONFIG_PCIE_PME) += pme/
+obj-$(CONFIG_PCIE_PME) += pme.o