===================================================================
@@ -370,6 +370,7 @@ config ACPI_EXTLOG
tristate "Extended Error Log support"
depends on X86_MCE && X86_LOCAL_APIC
select UEFI_CPER
+ select RAS_TRACE
default n
help
Certain usages such as Predictive Failure Analysis (PFA) require
@@ -384,6 +385,7 @@ config ACPI_EXTLOG
Enhanced MCA Logging allows firmware to provide additional error
information to system software, synchronous with MCE or CMCI. This
- driver adds support for that functionality.
+ driver adds support for that functionality with corresponding
+ tracepoint which carries that information to userspace.
endif # ACPI
===================================================================
@@ -16,6 +16,7 @@
#include <asm/mce.h>
#include "apei/apei-internal.h"
+#include <ras/ras_event.h>
#define EXT_ELOG_ENTRY_MASK GENMASK_ULL(51, 0) /* elog entry address mask */
@@ -43,6 +44,9 @@ struct extlog_l1_head {
static int old_edac_report_status;
+static char mem_location[CPER_REC_LEN];
+static char dimm_location[CPER_REC_LEN];
+
static u8 extlog_dsm_uuid[] __initdata = "663E35AF-CC10-41A4-88EA-5470AF055295";
/* L1 table related physical address */
@@ -69,6 +73,30 @@ static u32 l1_percpu_entry;
#define ELOG_ENTRY_ADDR(phyaddr) \
(phyaddr - elog_base + (u8 *)elog_addr)
+static void __trace_mem_error(const uuid_le *fru_id, char *fru_text,
+ u64 err_count, u32 severity,
+ struct cper_sec_mem_err *mem)
+{
+ u8 etype = -1, pa_mask_lsb = 0;
+ u64 pa = 0;
+
+ if (mem->validation_bits & CPER_MEM_VALID_ERROR_TYPE)
+ etype = mem->error_type;
+
+ if (mem->validation_bits & CPER_MEM_VALID_PA)
+ pa = mem->physical_addr;
+
+ if (mem->validation_bits & CPER_MEM_VALID_PA_MASK)
+ pa_mask_lsb = (u8)__ffs64(mem->physical_addr_mask);
+
+ memset(mem_location, 0, CPER_REC_LEN);
+ cper_mem_err_location(mem, mem_location);
+ memset(dimm_location, 0, CPER_REC_LEN);
+ cper_dimm_err_location(mem, dimm_location);
+ trace_extlog_mem_event(err_count, etype, severity, pa, pa_mask_lsb,
+ fru_id, dimm_location, mem_location, fru_text);
+}
+
static struct acpi_generic_status *extlog_elog_entry_check(int cpu, int bank)
{
int idx;
@@ -137,8 +165,12 @@ static int extlog_print(struct notifier_
struct mce *mce = (struct mce *)data;
int bank = mce->bank;
int cpu = mce->extcpu;
- struct acpi_generic_status *estatus;
- int rc;
+ struct acpi_generic_status *estatus, *tmp;
+ struct acpi_generic_data *gdata;
+ const uuid_le *fru_id = &NULL_UUID_LE;
+ char *fru_text = "";
+ uuid_le *sec_type;
+ static u64 err_count;
estatus = extlog_elog_entry_check(cpu, bank);
if (estatus == NULL)
@@ -148,7 +180,23 @@ static int extlog_print(struct notifier_
/* clear record status to enable BIOS to update it again */
estatus->block_status = 0;
- rc = print_extlog_rcd(NULL, (struct acpi_generic_status *)elog_buf, cpu);
+ tmp = (struct acpi_generic_status *)elog_buf;
+ print_extlog_rcd(NULL, tmp, cpu);
+
+ /* log event via trace */
+ err_count++;
+ gdata = (struct acpi_generic_data *)(tmp + 1);
+ if (gdata->validation_bits & CPER_SEC_VALID_FRU_ID)
+ fru_id = (uuid_le *)gdata->fru_id;
+ if (gdata->validation_bits & CPER_SEC_VALID_FRU_TEXT)
+ fru_text = gdata->fru_text;
+ sec_type = (uuid_le *)gdata->section_type;
+ if (!uuid_le_cmp(*sec_type, CPER_SEC_PLATFORM_MEM)) {
+ struct cper_sec_mem_err *mem_err = (void *)(gdata + 1);
+ if (gdata->error_data_length >= sizeof(*mem_err))
+ __trace_mem_error(fru_id, fru_text, err_count,
+ gdata->error_severity, mem_err);
+ }
return NOTIFY_STOP;
}
===================================================================
@@ -23,4 +23,5 @@ static int __init ras_init(void)
}
subsys_initcall(ras_init);
+EXPORT_TRACEPOINT_SYMBOL_GPL(extlog_mem_event);
EXPORT_TRACEPOINT_SYMBOL_GPL(mc_event);
===================================================================
@@ -9,6 +9,63 @@
#include <linux/edac.h>
#include <linux/ktime.h>
#include <linux/aer.h>
+#include <linux/cper.h>
+
+
+/*
+ * MCE Extended Error Log trace event
+ *
+ * These events are generated when hardware detects a corrected or
+ * uncorrected event.
+ */
+
+TRACE_EVENT(extlog_mem_event,
+ TP_PROTO(u32 error_number,
+ u8 etype,
+ u8 severity,
+ u64 pa,
+ u8 pa_mask_lsb,
+ const uuid_le *fru_id,
+ const char *dimm_info,
+ const char *mem_loc,
+ const char *fru_text),
+
+ TP_ARGS(error_number, etype, severity, pa, pa_mask_lsb,
+ fru_id, dimm_info, mem_loc, fru_text),
+
+ TP_STRUCT__entry(
+ __field(u32, error_number)
+ __field(u8, etype)
+ __field(u8, severity)
+ __field(u64, pa)
+ __field(u8, pa_mask_lsb)
+ __string(dimm_info, dimm_info)
+ __string(mem_loc, mem_loc)
+ __dynamic_array(char, fru, CPER_REC_LEN)
+ ),
+
+ TP_fast_assign(
+ __entry->error_number = error_number;
+ __entry->etype = etype;
+ __entry->severity = severity;
+ __entry->pa = pa;
+ __entry->pa_mask_lsb = pa_mask_lsb;
+ __assign_str(dimm_info, dimm_info);
+ __assign_str(mem_loc, mem_loc);
+ snprintf(__get_dynamic_array(fru), CPER_REC_LEN - 1,
+ "FRU: %pUl %.20s", fru_id, fru_text);
+ ),
+
+ TP_printk("%d %s error: %s %s %llx (mask lsb: %x), %s%s",
+ __entry->error_number,
+ cper_severity_str(__entry->severity),
+ cper_mem_err_type_str(__entry->etype),
+ __get_str(dimm_info),
+ __entry->pa,
+ __entry->pa_mask_lsb,
+ __get_str(mem_loc),
+ __get_str(fru))
+);
/*
* Hardware Events Report