Message ID | 20160912112951.76598-1-mika.westerberg@linux.intel.com (mailing list archive) |
---|---|
State | Accepted, archived |
Headers | show |
On Monday, September 12, 2016 02:29:51 PM Mika Westerberg wrote: > Follow DT and forbid default trigger if the GPIO irqchip device is > enumerated from ACPI. Triggering for these devices will be configured > automatically from ACPI interrupt resources provided by the BIOS. > > Suggested-by: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > --- > This is on top of Marc's patch here: > > https://lkml.org/lkml/2016/9/7/121 > > drivers/gpio/gpiolib.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c > index 5707b5d12b28..0efb67f387ea 100644 > --- a/drivers/gpio/gpiolib.c > +++ b/drivers/gpio/gpiolib.c > @@ -1618,13 +1618,18 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, > of_node = gpiochip->of_node; > #endif > /* > - * Specifying a default trigger is a terrible idea if DT is > + * Specifying a default trigger is a terrible idea if DT or ACPI is > * used to configure the interrupts, as you may end-up with > * conflicting triggers. Tell the user, and reset to NONE. > */ > if (WARN(of_node && type != IRQ_TYPE_NONE, > "%s: Ignoring %d default trigger\n", of_node->full_name, type)) > type = IRQ_TYPE_NONE; > + if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) { > + acpi_handle_warn(ACPI_HANDLE(gpiochip->parent), > + "Ignoring %d default trigger\n", type); > + type = IRQ_TYPE_NONE; > + } > > gpiochip->irqchip = irqchip; > gpiochip->irq_handler = handler; > Has this gone anywhere already? Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Nov 24, 2016 at 02:33:55AM +0100, Rafael J. Wysocki wrote: > On Monday, September 12, 2016 02:29:51 PM Mika Westerberg wrote: > > Follow DT and forbid default trigger if the GPIO irqchip device is > > enumerated from ACPI. Triggering for these devices will be configured > > automatically from ACPI interrupt resources provided by the BIOS. > > > > Suggested-by: Linus Walleij <linus.walleij@linaro.org> > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > --- > > This is on top of Marc's patch here: > > > > https://lkml.org/lkml/2016/9/7/121 > > > > drivers/gpio/gpiolib.c | 7 ++++++- > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c > > index 5707b5d12b28..0efb67f387ea 100644 > > --- a/drivers/gpio/gpiolib.c > > +++ b/drivers/gpio/gpiolib.c > > @@ -1618,13 +1618,18 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, > > of_node = gpiochip->of_node; > > #endif > > /* > > - * Specifying a default trigger is a terrible idea if DT is > > + * Specifying a default trigger is a terrible idea if DT or ACPI is > > * used to configure the interrupts, as you may end-up with > > * conflicting triggers. Tell the user, and reset to NONE. > > */ > > if (WARN(of_node && type != IRQ_TYPE_NONE, > > "%s: Ignoring %d default trigger\n", of_node->full_name, type)) > > type = IRQ_TYPE_NONE; > > + if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) { > > + acpi_handle_warn(ACPI_HANDLE(gpiochip->parent), > > + "Ignoring %d default trigger\n", type); > > + type = IRQ_TYPE_NONE; > > + } > > > > gpiochip->irqchip = irqchip; > > gpiochip->irq_handler = handler; > > > > Has this gone anywhere already? Yes, it should be in the mainline kernel with commit id 0a1e005374910180c30247386992565b05109eac. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Nov 24, 2016 at 8:59 AM, Mika Westerberg <mika.westerberg@linux.intel.com> wrote: > On Thu, Nov 24, 2016 at 02:33:55AM +0100, Rafael J. Wysocki wrote: >> On Monday, September 12, 2016 02:29:51 PM Mika Westerberg wrote: >> > Follow DT and forbid default trigger if the GPIO irqchip device is >> > enumerated from ACPI. Triggering for these devices will be configured >> > automatically from ACPI interrupt resources provided by the BIOS. >> > >> > Suggested-by: Linus Walleij <linus.walleij@linaro.org> >> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> >> > --- >> > This is on top of Marc's patch here: >> > >> > https://lkml.org/lkml/2016/9/7/121 >> > >> > drivers/gpio/gpiolib.c | 7 ++++++- >> > 1 file changed, 6 insertions(+), 1 deletion(-) >> > >> > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c >> > index 5707b5d12b28..0efb67f387ea 100644 >> > --- a/drivers/gpio/gpiolib.c >> > +++ b/drivers/gpio/gpiolib.c >> > @@ -1618,13 +1618,18 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, >> > of_node = gpiochip->of_node; >> > #endif >> > /* >> > - * Specifying a default trigger is a terrible idea if DT is >> > + * Specifying a default trigger is a terrible idea if DT or ACPI is >> > * used to configure the interrupts, as you may end-up with >> > * conflicting triggers. Tell the user, and reset to NONE. >> > */ >> > if (WARN(of_node && type != IRQ_TYPE_NONE, >> > "%s: Ignoring %d default trigger\n", of_node->full_name, type)) >> > type = IRQ_TYPE_NONE; >> > + if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) { >> > + acpi_handle_warn(ACPI_HANDLE(gpiochip->parent), >> > + "Ignoring %d default trigger\n", type); >> > + type = IRQ_TYPE_NONE; >> > + } >> > >> > gpiochip->irqchip = irqchip; >> > gpiochip->irq_handler = handler; >> > >> >> Has this gone anywhere already? > > Yes, it should be in the mainline kernel with commit id > 0a1e005374910180c30247386992565b05109eac. OK, thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 5707b5d12b28..0efb67f387ea 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1618,13 +1618,18 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, of_node = gpiochip->of_node; #endif /* - * Specifying a default trigger is a terrible idea if DT is + * Specifying a default trigger is a terrible idea if DT or ACPI is * used to configure the interrupts, as you may end-up with * conflicting triggers. Tell the user, and reset to NONE. */ if (WARN(of_node && type != IRQ_TYPE_NONE, "%s: Ignoring %d default trigger\n", of_node->full_name, type)) type = IRQ_TYPE_NONE; + if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) { + acpi_handle_warn(ACPI_HANDLE(gpiochip->parent), + "Ignoring %d default trigger\n", type); + type = IRQ_TYPE_NONE; + } gpiochip->irqchip = irqchip; gpiochip->irq_handler = handler;
Follow DT and forbid default trigger if the GPIO irqchip device is enumerated from ACPI. Triggering for these devices will be configured automatically from ACPI interrupt resources provided by the BIOS. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- This is on top of Marc's patch here: https://lkml.org/lkml/2016/9/7/121 drivers/gpio/gpiolib.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)