| Message ID | 20170203014128.317-5-dmitry.torokhov@gmail.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Rafael Wysocki |
| Headers | show |
On Thu, 2017-02-02 at 17:41 -0800, Dmitry Torokhov wrote: > With many drivers converting to using generic device properties, it is > useful to provide array of device properties when instantiating new > i2c > client via i2c_board_info and have them automatically added to the > device > in question. FWIW: Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > drivers/i2c/i2c-core.c | 16 +++++++++++++++- > include/linux/i2c.h | 3 +++ > 2 files changed, 18 insertions(+), 1 deletion(-) > > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c > index f009549f86a5..3897e78e5e9a 100644 > --- a/drivers/i2c/i2c-core.c > +++ b/drivers/i2c/i2c-core.c > @@ -1335,15 +1335,29 @@ i2c_new_device(struct i2c_adapter *adap, > struct i2c_board_info const *info) > client->dev.fwnode = info->fwnode; > > i2c_dev_set_name(adap, client); > + > + if (info->properties) { > + status = device_add_properties(&client->dev, info- > >properties); > + if (status) { > + dev_err(&adap->dev, > + "Failed to add properties to client > %s: %d\n", > + client->name, status); > + goto out_err; > + } > + } > + > status = device_register(&client->dev); > if (status) > - goto out_err; > + goto out_free_props; > > dev_dbg(&adap->dev, "client [%s] registered with bus id > %s\n", > client->name, dev_name(&client->dev)); > > return client; > > +out_free_props: > + if (info->properties) > + device_remove_properties(&client->dev); > out_err: > dev_err(&adap->dev, > "Failed to register i2c client %s at 0x%02x (%d)\n", > diff --git a/include/linux/i2c.h b/include/linux/i2c.h > index 4aa7d244b38a..ec8f866a5656 100644 > --- a/include/linux/i2c.h > +++ b/include/linux/i2c.h > @@ -51,6 +51,7 @@ enum i2c_slave_event; > typedef int (*i2c_slave_cb_t)(struct i2c_client *, enum > i2c_slave_event, u8 *); > > struct module; > +struct property_entry; > > #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) > /* > @@ -310,6 +311,7 @@ static inline int i2c_slave_event(struct > i2c_client *client, > * @archdata: copied into i2c_client.dev.archdata > * @of_node: pointer to OpenFirmware device node > * @fwnode: device node supplied by the platform firmware > + * @properties: additional device properties for the device > * @irq: stored in i2c_client.irq > * > * I2C doesn't actually support hardware probing, although > controllers and > @@ -331,6 +333,7 @@ struct i2c_board_info { > struct dev_archdata *archdata; > struct device_node *of_node; > struct fwnode_handle *fwnode; > + const struct property_entry *properties; > int irq; > }; >
On Fri, Feb 3, 2017 at 2:41 AM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > With many drivers converting to using generic device properties, it is > useful to provide array of device properties when instantiating new i2c > client via i2c_board_info and have them automatically added to the device > in question. > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Hi Wolfram, Any objections here? > --- > drivers/i2c/i2c-core.c | 16 +++++++++++++++- > include/linux/i2c.h | 3 +++ > 2 files changed, 18 insertions(+), 1 deletion(-) > > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c > index f009549f86a5..3897e78e5e9a 100644 > --- a/drivers/i2c/i2c-core.c > +++ b/drivers/i2c/i2c-core.c > @@ -1335,15 +1335,29 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) > client->dev.fwnode = info->fwnode; > > i2c_dev_set_name(adap, client); > + > + if (info->properties) { > + status = device_add_properties(&client->dev, info->properties); > + if (status) { > + dev_err(&adap->dev, > + "Failed to add properties to client %s: %d\n", > + client->name, status); > + goto out_err; > + } > + } > + > status = device_register(&client->dev); > if (status) > - goto out_err; > + goto out_free_props; > > dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n", > client->name, dev_name(&client->dev)); > > return client; > > +out_free_props: > + if (info->properties) > + device_remove_properties(&client->dev); > out_err: > dev_err(&adap->dev, > "Failed to register i2c client %s at 0x%02x (%d)\n", > diff --git a/include/linux/i2c.h b/include/linux/i2c.h > index 4aa7d244b38a..ec8f866a5656 100644 > --- a/include/linux/i2c.h > +++ b/include/linux/i2c.h > @@ -51,6 +51,7 @@ enum i2c_slave_event; > typedef int (*i2c_slave_cb_t)(struct i2c_client *, enum i2c_slave_event, u8 *); > > struct module; > +struct property_entry; > > #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) > /* > @@ -310,6 +311,7 @@ static inline int i2c_slave_event(struct i2c_client *client, > * @archdata: copied into i2c_client.dev.archdata > * @of_node: pointer to OpenFirmware device node > * @fwnode: device node supplied by the platform firmware > + * @properties: additional device properties for the device > * @irq: stored in i2c_client.irq > * > * I2C doesn't actually support hardware probing, although controllers and > @@ -331,6 +333,7 @@ struct i2c_board_info { > struct dev_archdata *archdata; > struct device_node *of_node; > struct fwnode_handle *fwnode; > + const struct property_entry *properties; > int irq; > }; > > -- Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Feb 02, 2017 at 05:41:28PM -0800, Dmitry Torokhov wrote: > With many drivers converting to using generic device properties, it is > useful to provide array of device properties when instantiating new i2c > client via i2c_board_info and have them automatically added to the device > in question. > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wolfram Sang <wsa@the-dreams.de>
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index f009549f86a5..3897e78e5e9a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1335,15 +1335,29 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.fwnode = info->fwnode; i2c_dev_set_name(adap, client); + + if (info->properties) { + status = device_add_properties(&client->dev, info->properties); + if (status) { + dev_err(&adap->dev, + "Failed to add properties to client %s: %d\n", + client->name, status); + goto out_err; + } + } + status = device_register(&client->dev); if (status) - goto out_err; + goto out_free_props; dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n", client->name, dev_name(&client->dev)); return client; +out_free_props: + if (info->properties) + device_remove_properties(&client->dev); out_err: dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x (%d)\n", diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 4aa7d244b38a..ec8f866a5656 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -51,6 +51,7 @@ enum i2c_slave_event; typedef int (*i2c_slave_cb_t)(struct i2c_client *, enum i2c_slave_event, u8 *); struct module; +struct property_entry; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* @@ -310,6 +311,7 @@ static inline int i2c_slave_event(struct i2c_client *client, * @archdata: copied into i2c_client.dev.archdata * @of_node: pointer to OpenFirmware device node * @fwnode: device node supplied by the platform firmware + * @properties: additional device properties for the device * @irq: stored in i2c_client.irq * * I2C doesn't actually support hardware probing, although controllers and @@ -331,6 +333,7 @@ struct i2c_board_info { struct dev_archdata *archdata; struct device_node *of_node; struct fwnode_handle *fwnode; + const struct property_entry *properties; int irq; };
With many drivers converting to using generic device properties, it is useful to provide array of device properties when instantiating new i2c client via i2c_board_info and have them automatically added to the device in question. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/i2c/i2c-core.c | 16 +++++++++++++++- include/linux/i2c.h | 3 +++ 2 files changed, 18 insertions(+), 1 deletion(-)