| Message ID | 20170331175105.8370-10-fu.wei@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: > From: Fu Wei <fu.wei@linaro.org> > > On platforms booting with ACPI, architected memory-mapped timers' > configuration data is provided by firmware through the ACPI GTDT > static table. > > The clocksource architected timer kernel driver requires a firmware > interface to collect timer configuration and configure its driver. > this infrastructure is present for device tree systems, but it is > missing on systems booting with ACPI. > > Implement the kernel infrastructure required to parse the static > ACPI GTDT table so that the architected timer clocksource driver can > make use of it on systems booting with ACPI, therefore enabling > the corresponding timers configuration. > > Signed-off-by: Fu Wei <fu.wei@linaro.org> > Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> > --- > drivers/acpi/arm64/gtdt.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/acpi.h | 1 + > 2 files changed, 147 insertions(+) We need Lorenzo's ack on this. Will -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: > From: Fu Wei <fu.wei@linaro.org> > > On platforms booting with ACPI, architected memory-mapped timers' > configuration data is provided by firmware through the ACPI GTDT > static table. > > The clocksource architected timer kernel driver requires a firmware > interface to collect timer configuration and configure its driver. > this infrastructure is present for device tree systems, but it is > missing on systems booting with ACPI. > > Implement the kernel infrastructure required to parse the static > ACPI GTDT table so that the architected timer clocksource driver can > make use of it on systems booting with ACPI, therefore enabling > the corresponding timers configuration. > > Signed-off-by: Fu Wei <fu.wei@linaro.org> > Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> > --- > drivers/acpi/arm64/gtdt.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/acpi.h | 1 + > 2 files changed, 147 insertions(+) > > diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c > index 3d95af8..3dd33f3 100644 > --- a/drivers/acpi/arm64/gtdt.c > +++ b/drivers/acpi/arm64/gtdt.c > @@ -13,6 +13,7 @@ > > #include <linux/acpi.h> > #include <linux/init.h> > +#include <linux/irqdomain.h> > #include <linux/kernel.h> > > #include <clocksource/arm_arch_timer.h> > @@ -37,6 +38,28 @@ struct acpi_gtdt_descriptor { > > static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata; > > +static inline void *next_platform_timer(void *platform_timer) > +{ > + struct acpi_gtdt_header *gh = platform_timer; > + > + platform_timer += gh->length; > + if (platform_timer < acpi_gtdt_desc.gtdt_end) > + return platform_timer; > + > + return NULL; > +} > + > +#define for_each_platform_timer(_g) \ > + for (_g = acpi_gtdt_desc.platform_timer; _g; \ > + _g = next_platform_timer(_g)) > + > +static inline bool is_timer_block(void *platform_timer) > +{ > + struct acpi_gtdt_header *gh = platform_timer; > + > + return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK; > +} > + > static int __init map_gt_gsi(u32 interrupt, u32 flags) > { > int trigger, polarity; > @@ -155,3 +178,126 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, > > return 0; > } > + > +static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block, > + struct arch_timer_mem *timer_mem) > +{ > + int i; > + struct arch_timer_mem_frame *frame; > + struct acpi_gtdt_timer_entry *gtdt_frame; > + > + if (!block->timer_count) { > + pr_err(FW_BUG "GT block present, but frame count is zero."); > + return -ENODEV; > + } > + > + if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) { > + pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n", > + block->timer_count); > + return -EINVAL; > + } > + > + timer_mem->cntctlbase = (phys_addr_t)block->block_address; > + /* > + * The CNTCTLBase frame is 4KB (register offsets 0x000 - 0xFFC). > + * See ARM DDI 0487A.k_iss10775, page I1-5129, Table I1-3 > + * "CNTCTLBase memory map". > + */ > + timer_mem->size = SZ_4K; > + > + gtdt_frame = (void *)block + block->timer_offset; > + if (gtdt_frame + block->timer_count != (void *)block + block->header.length) > + return -EINVAL; > + > + /* > + * Get the GT timer Frame data for every GT Block Timer > + */ > + for (i = 0; i < block->timer_count; i++, gtdt_frame++) { > + if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER) > + continue; > + > + if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt) > + goto error; > + > + frame = &timer_mem->frame[gtdt_frame->frame_number]; > + frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt, > + gtdt_frame->timer_flags); > + if (frame->phys_irq <= 0) { > + pr_warn("failed to map physical timer irq in frame %d.\n", > + gtdt_frame->frame_number); > + goto error; > + } > + > + if (gtdt_frame->virtual_timer_interrupt) { > + frame->virt_irq = > + map_gt_gsi(gtdt_frame->virtual_timer_interrupt, > + gtdt_frame->virtual_timer_flags); > + if (frame->virt_irq <= 0) { > + pr_warn("failed to map virtual timer irq in frame %d.\n", > + gtdt_frame->frame_number); > + acpi_unregister_gsi(gtdt_frame->timer_interrupt); > + goto error; > + } > + } else { > + frame->virt_irq = 0; > + pr_debug("virtual timer in frame %d not implemented.\n", > + gtdt_frame->frame_number); > + } > + > + frame->cntbase = gtdt_frame->base_address; > + /* > + * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC). > + * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4 > + * "CNTBaseN memory map". > + */ > + frame->size = SZ_4K; > + frame->valid = true; > + } > + > + return 0; > + > +error: > + for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { > + frame = &timer_mem->frame[i]; > + if (!frame->valid) > + continue; > + irq_dispose_mapping(frame->phys_irq); > + if (frame->virt_irq) > + irq_dispose_mapping(frame->virt_irq); > + } You should unregister GSIs with the same API you use to register GSIs, I do not like code that assumes acpi_unregister_gsi() internal implementation, it is wrong to do that. Other than that patch is ok: Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > + return -EINVAL; > +} > + > +/** > + * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table. > + * @timer_mem: The pointer to the array of struct arch_timer_mem for returning > + * the result of parsing. The element number of this array should > + * be platform_timer_count(the total number of platform timers). > + * @timer_count: It points to a integer variable which is used for storing the > + * number of GT blocks we have parsed. > + * > + * Return: 0 if success, -EINVAL/-ENODEV if error. > + */ > +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, > + int *timer_count) > +{ > + int ret; > + void *platform_timer; > + > + *timer_count = 0; > + for_each_platform_timer(platform_timer) { > + if (is_timer_block(platform_timer)) { > + ret = gtdt_parse_timer_block(platform_timer, timer_mem); > + if (ret) > + return ret; > + timer_mem++; > + (*timer_count)++; > + } > + } > + > + if (*timer_count) > + pr_info("found %d memory-mapped timer block(s).\n", > + *timer_count); > + > + return 0; > +} > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index 4b5c146..3193724 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -599,6 +599,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb); > int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count); > int acpi_gtdt_map_ppi(int type); > bool acpi_gtdt_c3stop(int type); > +int acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, int *timer_count); > #endif > > #else /* !CONFIG_ACPI */ > -- > 2.9.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, I tried to fix the issue that Lornzo raised, such that I could queue these patches. From looking at this patch in more detail however, I think there are further issues that need to be addressed. On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: > + /* > + * Get the GT timer Frame data for every GT Block Timer > + */ > + for (i = 0; i < block->timer_count; i++, gtdt_frame++) { > + if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER) > + continue; > + > + if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt) > + goto error; > + > + frame = &timer_mem->frame[gtdt_frame->frame_number]; > + frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt, > + gtdt_frame->timer_flags); > + if (frame->phys_irq <= 0) { > + pr_warn("failed to map physical timer irq in frame %d.\n", > + gtdt_frame->frame_number); > + goto error; > + } > + > + if (gtdt_frame->virtual_timer_interrupt) { > + frame->virt_irq = > + map_gt_gsi(gtdt_frame->virtual_timer_interrupt, > + gtdt_frame->virtual_timer_flags); > + if (frame->virt_irq <= 0) { > + pr_warn("failed to map virtual timer irq in frame %d.\n", > + gtdt_frame->frame_number); > + acpi_unregister_gsi(gtdt_frame->timer_interrupt); > + goto error; > + } > + } else { > + frame->virt_irq = 0; > + pr_debug("virtual timer in frame %d not implemented.\n", > + gtdt_frame->frame_number); > + } > + > + frame->cntbase = gtdt_frame->base_address; > + /* > + * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC). > + * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4 > + * "CNTBaseN memory map". > + */ > + frame->size = SZ_4K; > + frame->valid = true; > + } > + > + return 0; > + > +error: > + for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { > + frame = &timer_mem->frame[i]; > + if (!frame->valid) > + continue; > + irq_dispose_mapping(frame->phys_irq); > + if (frame->virt_irq) > + irq_dispose_mapping(frame->virt_irq); > + } We assign interrupts and may goto error before setting valid, so here we won't free the interrupts of the last frame we parsed. > + return -EINVAL; > +} > + > +/** > + * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table. > + * @timer_mem: The pointer to the array of struct arch_timer_mem for returning > + * the result of parsing. The element number of this array should > + * be platform_timer_count(the total number of platform timers). > + * @timer_count: It points to a integer variable which is used for storing the > + * number of GT blocks we have parsed. > + * > + * Return: 0 if success, -EINVAL/-ENODEV if error. > + */ > +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, > + int *timer_count) > +{ > + int ret; > + void *platform_timer; > + > + *timer_count = 0; > + for_each_platform_timer(platform_timer) { > + if (is_timer_block(platform_timer)) { > + ret = gtdt_parse_timer_block(platform_timer, timer_mem); > + if (ret) > + return ret; > + timer_mem++; > + (*timer_count)++; > + } > + } If we were to have multiple GT blocks, this would leave timer_mem in an inconsistent state. In gtdt_parse_timer_block we'll blat any existing timer_mem->cntctlbase, and blat some arbitrary set of frames. however, *some* frames may have been held over from a previous iteration. My understanding was that the system level timer had a single CNTCTLBase frame, and hence we should only have a single GT block. Judging by ARM DDI 0487A.k_iss10775, I1.3 "Memory-mapped timer components" and I3.4 "Generic Timer memory-mapped registers overview", it does appear that the system should only have one CNTCTLBase frame. What's going on here? Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Apr 05, 2017 at 07:38:09PM +0100, Mark Rutland wrote: > I tried to fix the issue that Lornzo raised, such that I could queue > these patches. From looking at this patch in more detail however, I > think there are further issues that need to be addressed. Looking again, I see that I was mistaken w.r.t. the multi GT block case. > > +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, > > + int *timer_count) > > +{ > > + int ret; > > + void *platform_timer; > > + > > + *timer_count = 0; > > + for_each_platform_timer(platform_timer) { > > + if (is_timer_block(platform_timer)) { > > + ret = gtdt_parse_timer_block(platform_timer, timer_mem); > > + if (ret) > > + return ret; > > + timer_mem++; > > + (*timer_count)++; > > + } > > + } > > If we were to have multiple GT blocks, this would leave timer_mem in an > inconsistent state. In gtdt_parse_timer_block we'll blat any existing > timer_mem->cntctlbase, and blat some arbitrary set of frames. however, > *some* frames may have been held over from a previous iteration. This is not the case; I had somehow missed the timer_mem++. Sorry for the noise. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Mark, On 6 April 2017 at 02:38, Mark Rutland <mark.rutland@arm.com> wrote: > Hi, > > I tried to fix the issue that Lornzo raised, such that I could queue > these patches. From looking at this patch in more detail however, I > think there are further issues that need to be addressed. > > On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: >> + /* >> + * Get the GT timer Frame data for every GT Block Timer >> + */ >> + for (i = 0; i < block->timer_count; i++, gtdt_frame++) { >> + if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER) >> + continue; >> + >> + if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt) >> + goto error; >> + >> + frame = &timer_mem->frame[gtdt_frame->frame_number]; >> + frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt, >> + gtdt_frame->timer_flags); >> + if (frame->phys_irq <= 0) { >> + pr_warn("failed to map physical timer irq in frame %d.\n", >> + gtdt_frame->frame_number); >> + goto error; >> + } >> + >> + if (gtdt_frame->virtual_timer_interrupt) { >> + frame->virt_irq = >> + map_gt_gsi(gtdt_frame->virtual_timer_interrupt, >> + gtdt_frame->virtual_timer_flags); >> + if (frame->virt_irq <= 0) { >> + pr_warn("failed to map virtual timer irq in frame %d.\n", >> + gtdt_frame->frame_number); >> + acpi_unregister_gsi(gtdt_frame->timer_interrupt); >> + goto error; >> + } >> + } else { >> + frame->virt_irq = 0; >> + pr_debug("virtual timer in frame %d not implemented.\n", >> + gtdt_frame->frame_number); >> + } >> + >> + frame->cntbase = gtdt_frame->base_address; >> + /* >> + * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC). >> + * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4 >> + * "CNTBaseN memory map". >> + */ >> + frame->size = SZ_4K; >> + frame->valid = true; >> + } >> + >> + return 0; >> + >> +error: >> + for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { >> + frame = &timer_mem->frame[i]; >> + if (!frame->valid) >> + continue; >> + irq_dispose_mapping(frame->phys_irq); >> + if (frame->virt_irq) >> + irq_dispose_mapping(frame->virt_irq); >> + } > > We assign interrupts and may goto error before setting valid, so here we yes, I mean to do it.(setting valid at the end of loop) > won't free the interrupts of the last frame we parsed. that won't be a problem, we may assign two interrupts in a round: First of all, if the assignment goes wrong, that means the current interrupt haven't been successfully assigned. (1)if the first goes wrong, the we goto error to unwind the irqs assigned in previous rounds. (2)if the second one goes wrong , we acpi_unregister_gsi the first one and then goto error to unwind the irqs assigned in previous rounds. (3)If the two assignments are successful, set up valid flag So we won't miss freeing the interrupts of the last frame we parsed. Did I miss something? Thanks! > >> + return -EINVAL; >> +} >> + >> +/** >> + * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table. >> + * @timer_mem: The pointer to the array of struct arch_timer_mem for returning >> + * the result of parsing. The element number of this array should >> + * be platform_timer_count(the total number of platform timers). >> + * @timer_count: It points to a integer variable which is used for storing the >> + * number of GT blocks we have parsed. >> + * >> + * Return: 0 if success, -EINVAL/-ENODEV if error. >> + */ >> +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, >> + int *timer_count) >> +{ >> + int ret; >> + void *platform_timer; >> + >> + *timer_count = 0; >> + for_each_platform_timer(platform_timer) { >> + if (is_timer_block(platform_timer)) { >> + ret = gtdt_parse_timer_block(platform_timer, timer_mem); >> + if (ret) >> + return ret; >> + timer_mem++; >> + (*timer_count)++; >> + } >> + } > > If we were to have multiple GT blocks, this would leave timer_mem in an > inconsistent state. In gtdt_parse_timer_block we'll blat any existing > timer_mem->cntctlbase, and blat some arbitrary set of frames. however, > *some* frames may have been held over from a previous iteration. > > My understanding was that the system level timer had a single CNTCTLBase > frame, and hence we should only have a single GT block. > > Judging by ARM DDI 0487A.k_iss10775, I1.3 "Memory-mapped timer > components" and I3.4 "Generic Timer memory-mapped registers overview", > it does appear that the system should only have one CNTCTLBase frame. > > What's going on here? > > Thanks, > Mark.
Hi Lorenzo, On 3 April 2017 at 18:45, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote: > On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: >> From: Fu Wei <fu.wei@linaro.org> >> >> On platforms booting with ACPI, architected memory-mapped timers' >> configuration data is provided by firmware through the ACPI GTDT >> static table. >> >> The clocksource architected timer kernel driver requires a firmware >> interface to collect timer configuration and configure its driver. >> this infrastructure is present for device tree systems, but it is >> missing on systems booting with ACPI. >> >> Implement the kernel infrastructure required to parse the static >> ACPI GTDT table so that the architected timer clocksource driver can >> make use of it on systems booting with ACPI, therefore enabling >> the corresponding timers configuration. >> >> Signed-off-by: Fu Wei <fu.wei@linaro.org> >> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> >> --- >> drivers/acpi/arm64/gtdt.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++ >> include/linux/acpi.h | 1 + >> 2 files changed, 147 insertions(+) >> >> diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c >> index 3d95af8..3dd33f3 100644 >> --- a/drivers/acpi/arm64/gtdt.c >> +++ b/drivers/acpi/arm64/gtdt.c >> @@ -13,6 +13,7 @@ >> >> #include <linux/acpi.h> >> #include <linux/init.h> >> +#include <linux/irqdomain.h> >> #include <linux/kernel.h> >> >> #include <clocksource/arm_arch_timer.h> >> @@ -37,6 +38,28 @@ struct acpi_gtdt_descriptor { >> >> static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata; >> >> +static inline void *next_platform_timer(void *platform_timer) >> +{ >> + struct acpi_gtdt_header *gh = platform_timer; >> + >> + platform_timer += gh->length; >> + if (platform_timer < acpi_gtdt_desc.gtdt_end) >> + return platform_timer; >> + >> + return NULL; >> +} >> + >> +#define for_each_platform_timer(_g) \ >> + for (_g = acpi_gtdt_desc.platform_timer; _g; \ >> + _g = next_platform_timer(_g)) >> + >> +static inline bool is_timer_block(void *platform_timer) >> +{ >> + struct acpi_gtdt_header *gh = platform_timer; >> + >> + return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK; >> +} >> + >> static int __init map_gt_gsi(u32 interrupt, u32 flags) >> { >> int trigger, polarity; >> @@ -155,3 +178,126 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, >> >> return 0; >> } >> + >> +static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block, >> + struct arch_timer_mem *timer_mem) >> +{ >> + int i; >> + struct arch_timer_mem_frame *frame; >> + struct acpi_gtdt_timer_entry *gtdt_frame; >> + >> + if (!block->timer_count) { >> + pr_err(FW_BUG "GT block present, but frame count is zero."); >> + return -ENODEV; >> + } >> + >> + if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) { >> + pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n", >> + block->timer_count); >> + return -EINVAL; >> + } >> + >> + timer_mem->cntctlbase = (phys_addr_t)block->block_address; >> + /* >> + * The CNTCTLBase frame is 4KB (register offsets 0x000 - 0xFFC). >> + * See ARM DDI 0487A.k_iss10775, page I1-5129, Table I1-3 >> + * "CNTCTLBase memory map". >> + */ >> + timer_mem->size = SZ_4K; >> + >> + gtdt_frame = (void *)block + block->timer_offset; >> + if (gtdt_frame + block->timer_count != (void *)block + block->header.length) >> + return -EINVAL; >> + >> + /* >> + * Get the GT timer Frame data for every GT Block Timer >> + */ >> + for (i = 0; i < block->timer_count; i++, gtdt_frame++) { >> + if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER) >> + continue; >> + >> + if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt) >> + goto error; >> + >> + frame = &timer_mem->frame[gtdt_frame->frame_number]; >> + frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt, >> + gtdt_frame->timer_flags); >> + if (frame->phys_irq <= 0) { >> + pr_warn("failed to map physical timer irq in frame %d.\n", >> + gtdt_frame->frame_number); >> + goto error; >> + } >> + >> + if (gtdt_frame->virtual_timer_interrupt) { >> + frame->virt_irq = >> + map_gt_gsi(gtdt_frame->virtual_timer_interrupt, >> + gtdt_frame->virtual_timer_flags); >> + if (frame->virt_irq <= 0) { >> + pr_warn("failed to map virtual timer irq in frame %d.\n", >> + gtdt_frame->frame_number); >> + acpi_unregister_gsi(gtdt_frame->timer_interrupt); >> + goto error; >> + } >> + } else { >> + frame->virt_irq = 0; >> + pr_debug("virtual timer in frame %d not implemented.\n", >> + gtdt_frame->frame_number); >> + } >> + >> + frame->cntbase = gtdt_frame->base_address; >> + /* >> + * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC). >> + * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4 >> + * "CNTBaseN memory map". >> + */ >> + frame->size = SZ_4K; >> + frame->valid = true; >> + } >> + >> + return 0; >> + >> +error: >> + for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { >> + frame = &timer_mem->frame[i]; >> + if (!frame->valid) >> + continue; >> + irq_dispose_mapping(frame->phys_irq); >> + if (frame->virt_irq) >> + irq_dispose_mapping(frame->virt_irq); >> + } > > You should unregister GSIs with the same API you use to register GSIs, > I do not like code that assumes acpi_unregister_gsi() internal > implementation, it is wrong to do that. Thanks for pointing it out, I have thought about it. But the the same API I use to register GSIs is acpi_unregister_gsi(GSI); that means we need GSI as the parameter. But when the register goes wrong, and goto error, the info we have is the IRQ but not GSI. So I use the acpi_unregister_gsi() internal implementation. If we try to use the same API, we may need to add this info into struct arch_timer_mem_frame only for unwinding. But yes, we do have another way to do, that is registering GSI untill we figure out which is the "best_frame". But this requires some bigger change(like using the irq_of_parse_and_map() internal implementation to get GSI but don't map), and map GSI untill get the "best_frame" . which way do you prefer? But I will unify the API in v24 > > Other than that patch is ok: > > Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > >> + return -EINVAL; >> +} >> + >> +/** >> + * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table. >> + * @timer_mem: The pointer to the array of struct arch_timer_mem for returning >> + * the result of parsing. The element number of this array should >> + * be platform_timer_count(the total number of platform timers). >> + * @timer_count: It points to a integer variable which is used for storing the >> + * number of GT blocks we have parsed. >> + * >> + * Return: 0 if success, -EINVAL/-ENODEV if error. >> + */ >> +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, >> + int *timer_count) >> +{ >> + int ret; >> + void *platform_timer; >> + >> + *timer_count = 0; >> + for_each_platform_timer(platform_timer) { >> + if (is_timer_block(platform_timer)) { >> + ret = gtdt_parse_timer_block(platform_timer, timer_mem); >> + if (ret) >> + return ret; >> + timer_mem++; >> + (*timer_count)++; >> + } >> + } >> + >> + if (*timer_count) >> + pr_info("found %d memory-mapped timer block(s).\n", >> + *timer_count); >> + >> + return 0; >> +} >> diff --git a/include/linux/acpi.h b/include/linux/acpi.h >> index 4b5c146..3193724 100644 >> --- a/include/linux/acpi.h >> +++ b/include/linux/acpi.h >> @@ -599,6 +599,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb); >> int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count); >> int acpi_gtdt_map_ppi(int type); >> bool acpi_gtdt_c3stop(int type); >> +int acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, int *timer_count); >> #endif >> >> #else /* !CONFIG_ACPI */ >> -- >> 2.9.3 >>
On Fri, Apr 07, 2017 at 12:47:47AM +0800, Fu Wei wrote: > On 6 April 2017 at 02:38, Mark Rutland <mark.rutland@arm.com> wrote: > > On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: > >> + /* > >> + * Get the GT timer Frame data for every GT Block Timer > >> + */ > >> + for (i = 0; i < block->timer_count; i++, gtdt_frame++) { > >> + if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER) > >> + continue; > >> + > >> + if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt) > >> + goto error; > >> + > >> + frame = &timer_mem->frame[gtdt_frame->frame_number]; > >> + frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt, > >> + gtdt_frame->timer_flags); > >> + if (frame->phys_irq <= 0) { > >> + pr_warn("failed to map physical timer irq in frame %d.\n", > >> + gtdt_frame->frame_number); > >> + goto error; > >> + } > >> + > >> + if (gtdt_frame->virtual_timer_interrupt) { > >> + frame->virt_irq = > >> + map_gt_gsi(gtdt_frame->virtual_timer_interrupt, > >> + gtdt_frame->virtual_timer_flags); > >> + if (frame->virt_irq <= 0) { > >> + pr_warn("failed to map virtual timer irq in frame %d.\n", > >> + gtdt_frame->frame_number); > >> + acpi_unregister_gsi(gtdt_frame->timer_interrupt); > >> + goto error; > >> + } > >> + } else { > >> + frame->virt_irq = 0; > >> + pr_debug("virtual timer in frame %d not implemented.\n", > >> + gtdt_frame->frame_number); > >> + } > >> + > >> + frame->cntbase = gtdt_frame->base_address; > >> + /* > >> + * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC). > >> + * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4 > >> + * "CNTBaseN memory map". > >> + */ > >> + frame->size = SZ_4K; > >> + frame->valid = true; > >> + } > >> + > >> + return 0; > >> + > >> +error: > >> + for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { > >> + frame = &timer_mem->frame[i]; > >> + if (!frame->valid) > >> + continue; > >> + irq_dispose_mapping(frame->phys_irq); > >> + if (frame->virt_irq) > >> + irq_dispose_mapping(frame->virt_irq); > >> + } > > > > We assign interrupts and may goto error before setting valid, so here we > > yes, I mean to do it.(setting valid at the end of loop) > > > won't free the interrupts of the last frame we parsed. > > that won't be a problem, we may assign two interrupts in a round: > First of all, if the assignment goes wrong, that means the current > interrupt haven't been successfully assigned. > (1)if the first goes wrong, the we goto error to unwind the irqs > assigned in previous rounds. > (2)if the second one goes wrong , we acpi_unregister_gsi the first one > and then goto error to unwind the irqs assigned in previous rounds. > (3)If the two assignments are successful, set up valid flag > > So we won't miss freeing the interrupts of the last frame we parsed. > > Did I miss something? No; you are correct, and I was mistaken. However, I would prefer to simplify this such that we only free the IRQs in the error path. We should be able to iterate over all freams, freeing any non-zero interrupt, since !valid frames shouldn't have non-zero interrupts. I can make that update locally; no need to respin. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Mark On 7 April 2017 at 01:24, Mark Rutland <mark.rutland@arm.com> wrote: > On Fri, Apr 07, 2017 at 12:47:47AM +0800, Fu Wei wrote: >> On 6 April 2017 at 02:38, Mark Rutland <mark.rutland@arm.com> wrote: >> > On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: >> >> + /* >> >> + * Get the GT timer Frame data for every GT Block Timer >> >> + */ >> >> + for (i = 0; i < block->timer_count; i++, gtdt_frame++) { >> >> + if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER) >> >> + continue; >> >> + >> >> + if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt) >> >> + goto error; >> >> + >> >> + frame = &timer_mem->frame[gtdt_frame->frame_number]; >> >> + frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt, >> >> + gtdt_frame->timer_flags); >> >> + if (frame->phys_irq <= 0) { >> >> + pr_warn("failed to map physical timer irq in frame %d.\n", >> >> + gtdt_frame->frame_number); >> >> + goto error; >> >> + } >> >> + >> >> + if (gtdt_frame->virtual_timer_interrupt) { >> >> + frame->virt_irq = >> >> + map_gt_gsi(gtdt_frame->virtual_timer_interrupt, >> >> + gtdt_frame->virtual_timer_flags); >> >> + if (frame->virt_irq <= 0) { >> >> + pr_warn("failed to map virtual timer irq in frame %d.\n", >> >> + gtdt_frame->frame_number); >> >> + acpi_unregister_gsi(gtdt_frame->timer_interrupt); >> >> + goto error; >> >> + } >> >> + } else { >> >> + frame->virt_irq = 0; >> >> + pr_debug("virtual timer in frame %d not implemented.\n", >> >> + gtdt_frame->frame_number); >> >> + } >> >> + >> >> + frame->cntbase = gtdt_frame->base_address; >> >> + /* >> >> + * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC). >> >> + * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4 >> >> + * "CNTBaseN memory map". >> >> + */ >> >> + frame->size = SZ_4K; >> >> + frame->valid = true; >> >> + } >> >> + >> >> + return 0; >> >> + >> >> +error: >> >> + for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { >> >> + frame = &timer_mem->frame[i]; >> >> + if (!frame->valid) >> >> + continue; >> >> + irq_dispose_mapping(frame->phys_irq); >> >> + if (frame->virt_irq) >> >> + irq_dispose_mapping(frame->virt_irq); >> >> + } >> > >> > We assign interrupts and may goto error before setting valid, so here we >> >> yes, I mean to do it.(setting valid at the end of loop) >> >> > won't free the interrupts of the last frame we parsed. >> >> that won't be a problem, we may assign two interrupts in a round: >> First of all, if the assignment goes wrong, that means the current >> interrupt haven't been successfully assigned. >> (1)if the first goes wrong, the we goto error to unwind the irqs >> assigned in previous rounds. >> (2)if the second one goes wrong , we acpi_unregister_gsi the first one >> and then goto error to unwind the irqs assigned in previous rounds. >> (3)If the two assignments are successful, set up valid flag >> >> So we won't miss freeing the interrupts of the last frame we parsed. >> >> Did I miss something? > > No; you are correct, and I was mistaken. > > However, I would prefer to simplify this such that we only free the > IRQs in the error path. > > We should be able to iterate over all freams, freeing any non-zero > interrupt, since !valid frames shouldn't have non-zero interrupts. Yes, that is what I am doing : if (!frame->valid) continue; phys_irq must be non-zero, otherwise it was registered incorrectly (an error) but we need to check virt_irq, it maybe 0 because, this timer frame may not implement virt timer. Can we simplify it? any idear? Lorenzo addressed the API issue, we may can fix it by getting GSI info from DT, then register it until we figure the best frame. It may need some big change in DT code I can do it in V24 , any thought? Great thanks for your review and help! :-) > > I can make that update locally; no need to respin. > > Thanks, > Mark.
On Fri, Apr 07, 2017 at 01:39:09AM +0800, Fu Wei wrote: > On 7 April 2017 at 01:24, Mark Rutland <mark.rutland@arm.com> wrote: > > On Fri, Apr 07, 2017 at 12:47:47AM +0800, Fu Wei wrote: > >> On 6 April 2017 at 02:38, Mark Rutland <mark.rutland@arm.com> wrote: > >> > On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: > > However, I would prefer to simplify this such that we only free the > > IRQs in the error path. > > > > We should be able to iterate over all freams, freeing any non-zero > > interrupt, since !valid frames shouldn't have non-zero interrupts. > > Yes, that is what I am doing : > > if (!frame->valid) > continue; What I meant was that we won't look at the frame->valid flag at all; only the interrupts. e.g. for (int i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { if (frame->phys_irq > 0) free_the_phys_irq_somehow(); if (frame->virt_irq > 0) free_the_virt_irq_somehow(); } ... where we somehow figure out the GSI, or we introduce an api like unregister_gsi_for_irq(irq). Since the !valid frames should all have zero for their interrupt fields, no special handling is necessary. That way, we only free the IRQs in one place, it's obvious that we consistently free all of them, etc. > Lorenzo addressed the API issue, we may can fix it by getting GSI info > from DT, then register it until we figure the best frame. > It may need some big change in DT code I'd prefer to keep this constrained to the ACPI code. ;) Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Mark, On 7 April 2017 at 01:52, Mark Rutland <mark.rutland@arm.com> wrote: > On Fri, Apr 07, 2017 at 01:39:09AM +0800, Fu Wei wrote: >> On 7 April 2017 at 01:24, Mark Rutland <mark.rutland@arm.com> wrote: >> > On Fri, Apr 07, 2017 at 12:47:47AM +0800, Fu Wei wrote: >> >> On 6 April 2017 at 02:38, Mark Rutland <mark.rutland@arm.com> wrote: >> >> > On Sat, Apr 01, 2017 at 01:51:03AM +0800, fu.wei@linaro.org wrote: > >> > However, I would prefer to simplify this such that we only free the >> > IRQs in the error path. >> > >> > We should be able to iterate over all freams, freeing any non-zero >> > interrupt, since !valid frames shouldn't have non-zero interrupts. >> >> Yes, that is what I am doing : >> >> if (!frame->valid) >> continue; > > What I meant was that we won't look at the frame->valid flag at all; > only the interrupts. e.g. > > for (int i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { > if (frame->phys_irq > 0) > free_the_phys_irq_somehow(); > if (frame->virt_irq > 0) > free_the_virt_irq_somehow(); > } Since we use "kcalloc" to allocate struct arch_timer_mem, this should be OK. > > ... where we somehow figure out the GSI, or we introduce an api like > unregister_gsi_for_irq(irq). Yes, If you are OK with introducing a new API , this problem is solved :-) > > Since the !valid frames should all have zero for their interrupt fields, > no special handling is necessary. > > That way, we only free the IRQs in one place, it's obvious that we > consistently free all of them, etc. > >> Lorenzo addressed the API issue, we may can fix it by getting GSI info >> from DT, then register it until we figure the best frame. >> It may need some big change in DT code > > I'd prefer to keep this constrained to the ACPI code. ;) > > Thanks, > Mark.
diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c index 3d95af8..3dd33f3 100644 --- a/drivers/acpi/arm64/gtdt.c +++ b/drivers/acpi/arm64/gtdt.c @@ -13,6 +13,7 @@ #include <linux/acpi.h> #include <linux/init.h> +#include <linux/irqdomain.h> #include <linux/kernel.h> #include <clocksource/arm_arch_timer.h> @@ -37,6 +38,28 @@ struct acpi_gtdt_descriptor { static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata; +static inline void *next_platform_timer(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + platform_timer += gh->length; + if (platform_timer < acpi_gtdt_desc.gtdt_end) + return platform_timer; + + return NULL; +} + +#define for_each_platform_timer(_g) \ + for (_g = acpi_gtdt_desc.platform_timer; _g; \ + _g = next_platform_timer(_g)) + +static inline bool is_timer_block(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK; +} + static int __init map_gt_gsi(u32 interrupt, u32 flags) { int trigger, polarity; @@ -155,3 +178,126 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, return 0; } + +static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block, + struct arch_timer_mem *timer_mem) +{ + int i; + struct arch_timer_mem_frame *frame; + struct acpi_gtdt_timer_entry *gtdt_frame; + + if (!block->timer_count) { + pr_err(FW_BUG "GT block present, but frame count is zero."); + return -ENODEV; + } + + if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) { + pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n", + block->timer_count); + return -EINVAL; + } + + timer_mem->cntctlbase = (phys_addr_t)block->block_address; + /* + * The CNTCTLBase frame is 4KB (register offsets 0x000 - 0xFFC). + * See ARM DDI 0487A.k_iss10775, page I1-5129, Table I1-3 + * "CNTCTLBase memory map". + */ + timer_mem->size = SZ_4K; + + gtdt_frame = (void *)block + block->timer_offset; + if (gtdt_frame + block->timer_count != (void *)block + block->header.length) + return -EINVAL; + + /* + * Get the GT timer Frame data for every GT Block Timer + */ + for (i = 0; i < block->timer_count; i++, gtdt_frame++) { + if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER) + continue; + + if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt) + goto error; + + frame = &timer_mem->frame[gtdt_frame->frame_number]; + frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt, + gtdt_frame->timer_flags); + if (frame->phys_irq <= 0) { + pr_warn("failed to map physical timer irq in frame %d.\n", + gtdt_frame->frame_number); + goto error; + } + + if (gtdt_frame->virtual_timer_interrupt) { + frame->virt_irq = + map_gt_gsi(gtdt_frame->virtual_timer_interrupt, + gtdt_frame->virtual_timer_flags); + if (frame->virt_irq <= 0) { + pr_warn("failed to map virtual timer irq in frame %d.\n", + gtdt_frame->frame_number); + acpi_unregister_gsi(gtdt_frame->timer_interrupt); + goto error; + } + } else { + frame->virt_irq = 0; + pr_debug("virtual timer in frame %d not implemented.\n", + gtdt_frame->frame_number); + } + + frame->cntbase = gtdt_frame->base_address; + /* + * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC). + * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4 + * "CNTBaseN memory map". + */ + frame->size = SZ_4K; + frame->valid = true; + } + + return 0; + +error: + for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) { + frame = &timer_mem->frame[i]; + if (!frame->valid) + continue; + irq_dispose_mapping(frame->phys_irq); + if (frame->virt_irq) + irq_dispose_mapping(frame->virt_irq); + } + return -EINVAL; +} + +/** + * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table. + * @timer_mem: The pointer to the array of struct arch_timer_mem for returning + * the result of parsing. The element number of this array should + * be platform_timer_count(the total number of platform timers). + * @timer_count: It points to a integer variable which is used for storing the + * number of GT blocks we have parsed. + * + * Return: 0 if success, -EINVAL/-ENODEV if error. + */ +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, + int *timer_count) +{ + int ret; + void *platform_timer; + + *timer_count = 0; + for_each_platform_timer(platform_timer) { + if (is_timer_block(platform_timer)) { + ret = gtdt_parse_timer_block(platform_timer, timer_mem); + if (ret) + return ret; + timer_mem++; + (*timer_count)++; + } + } + + if (*timer_count) + pr_info("found %d memory-mapped timer block(s).\n", + *timer_count); + + return 0; +} diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4b5c146..3193724 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -599,6 +599,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb); int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count); int acpi_gtdt_map_ppi(int type); bool acpi_gtdt_c3stop(int type); +int acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, int *timer_count); #endif #else /* !CONFIG_ACPI */