diff mbox

iio: accel: bma180: Add ACPI enumeration support

Message ID 20170421073812.12531-1-hdegoede@redhat.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Hans de Goede April 21, 2017, 7:38 a.m. UTC
Some x86 tablets use the bms250 accelerometer, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/iio/accel/bma180.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

Comments

Jonathan Cameron April 26, 2017, 6:40 a.m. UTC | #1
On 21/04/17 08:38, Hans de Goede wrote:
> Some x86 tablets use the bms250 accelerometer, add support for this.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hi Hans,

Would you mind rebasing this on the latest iio.git togreg branch?
(which should be the same as linux-next by now if that is easier)
Some OF bindings got added in the recent cycle that make it not
apply cleanly.

Thanks,

Jonathan
> ---
>  drivers/iio/accel/bma180.c | 20 +++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
> index 0890934..5c75190 100644
> --- a/drivers/iio/accel/bma180.c
> +++ b/drivers/iio/accel/bma180.c
> @@ -14,6 +14,7 @@
>   * BMA250: 7-bit I2C slave address 0x18 or 0x19
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/module.h>
>  #include <linux/i2c.h>
>  #include <linux/interrupt.h>
> @@ -705,6 +706,8 @@ static const struct iio_trigger_ops bma180_trigger_ops = {
>  static int bma180_probe(struct i2c_client *client,
>  		const struct i2c_device_id *id)
>  {
> +	struct device *dev = &client->dev;
> +	const struct acpi_device_id *acpi_id;
>  	struct bma180_data *data;
>  	struct iio_dev *indio_dev;
>  	int ret;
> @@ -716,7 +719,15 @@ static int bma180_probe(struct i2c_client *client,
>  	data = iio_priv(indio_dev);
>  	i2c_set_clientdata(client, indio_dev);
>  	data->client = client;
> -	data->part_info = &bma180_part_info[id->driver_data];
> +	if (id) {
> +		data->part_info = &bma180_part_info[id->driver_data];
> +	} else {
> +		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
> +		if (!acpi_id)
> +			return -ENODEV;
> +
> +		data->part_info = &bma180_part_info[acpi_id->driver_data];
> +	}
>  
>  	ret = data->part_info->chip_config(data);
>  	if (ret < 0)
> @@ -836,6 +847,12 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
>  #define BMA180_PM_OPS NULL
>  #endif
>  
> +static const struct acpi_device_id bma180_acpi_match[] = {
> +	{ "BMA250E", BMA250 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(acpi, bma180_acpi_match);
> +
>  static struct i2c_device_id bma180_ids[] = {
>  	{ "bma180", BMA180 },
>  	{ "bma250", BMA250 },
> @@ -847,6 +864,7 @@ MODULE_DEVICE_TABLE(i2c, bma180_ids);
>  static struct i2c_driver bma180_driver = {
>  	.driver = {
>  		.name	= "bma180",
> +		.acpi_match_table = ACPI_PTR(bma180_acpi_match),
>  		.pm	= BMA180_PM_OPS,
>  	},
>  	.probe		= bma180_probe,
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Hans de Goede May 16, 2017, 8:09 a.m. UTC | #2
Hi,

On 26-04-17 08:40, Jonathan Cameron wrote:
> On 21/04/17 08:38, Hans de Goede wrote:
>> Some x86 tablets use the bms250 accelerometer, add support for this.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Hi Hans,
> 
> Would you mind rebasing this on the latest iio.git togreg branch?
> (which should be the same as linux-next by now if that is easier)
> Some OF bindings got added in the recent cycle that make it not
> apply cleanly.

Sure I can rebase,, actually I just tested a rebased version and noticed:

[   20.705333] bma180 i2c-BMA250E:00: failed to config the chip

Which is because the BMA250E and BMA250 are not the same chip
as I thought. So v2 is going to be 2 patches one to add support
for the BMA250E (it is compatible but reports a different chip-id)
and another one actually adding the ACPI enumeration support
for it.

Regards,

Hans


> 
> Thanks,
> 
> Jonathan
>> ---
>>   drivers/iio/accel/bma180.c | 20 +++++++++++++++++++-
>>   1 file changed, 19 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
>> index 0890934..5c75190 100644
>> --- a/drivers/iio/accel/bma180.c
>> +++ b/drivers/iio/accel/bma180.c
>> @@ -14,6 +14,7 @@
>>    * BMA250: 7-bit I2C slave address 0x18 or 0x19
>>    */
>>   
>> +#include <linux/acpi.h>
>>   #include <linux/module.h>
>>   #include <linux/i2c.h>
>>   #include <linux/interrupt.h>
>> @@ -705,6 +706,8 @@ static const struct iio_trigger_ops bma180_trigger_ops = {
>>   static int bma180_probe(struct i2c_client *client,
>>   		const struct i2c_device_id *id)
>>   {
>> +	struct device *dev = &client->dev;
>> +	const struct acpi_device_id *acpi_id;
>>   	struct bma180_data *data;
>>   	struct iio_dev *indio_dev;
>>   	int ret;
>> @@ -716,7 +719,15 @@ static int bma180_probe(struct i2c_client *client,
>>   	data = iio_priv(indio_dev);
>>   	i2c_set_clientdata(client, indio_dev);
>>   	data->client = client;
>> -	data->part_info = &bma180_part_info[id->driver_data];
>> +	if (id) {
>> +		data->part_info = &bma180_part_info[id->driver_data];
>> +	} else {
>> +		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
>> +		if (!acpi_id)
>> +			return -ENODEV;
>> +
>> +		data->part_info = &bma180_part_info[acpi_id->driver_data];
>> +	}
>>   
>>   	ret = data->part_info->chip_config(data);
>>   	if (ret < 0)
>> @@ -836,6 +847,12 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
>>   #define BMA180_PM_OPS NULL
>>   #endif
>>   
>> +static const struct acpi_device_id bma180_acpi_match[] = {
>> +	{ "BMA250E", BMA250 },
>> +	{ }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, bma180_acpi_match);
>> +
>>   static struct i2c_device_id bma180_ids[] = {
>>   	{ "bma180", BMA180 },
>>   	{ "bma250", BMA250 },
>> @@ -847,6 +864,7 @@ MODULE_DEVICE_TABLE(i2c, bma180_ids);
>>   static struct i2c_driver bma180_driver = {
>>   	.driver = {
>>   		.name	= "bma180",
>> +		.acpi_match_table = ACPI_PTR(bma180_acpi_match),
>>   		.pm	= BMA180_PM_OPS,
>>   	},
>>   	.probe		= bma180_probe,
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 0890934..5c75190 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -14,6 +14,7 @@ 
  * BMA250: 7-bit I2C slave address 0x18 or 0x19
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -705,6 +706,8 @@  static const struct iio_trigger_ops bma180_trigger_ops = {
 static int bma180_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
+	const struct acpi_device_id *acpi_id;
 	struct bma180_data *data;
 	struct iio_dev *indio_dev;
 	int ret;
@@ -716,7 +719,15 @@  static int bma180_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
-	data->part_info = &bma180_part_info[id->driver_data];
+	if (id) {
+		data->part_info = &bma180_part_info[id->driver_data];
+	} else {
+		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+		if (!acpi_id)
+			return -ENODEV;
+
+		data->part_info = &bma180_part_info[acpi_id->driver_data];
+	}
 
 	ret = data->part_info->chip_config(data);
 	if (ret < 0)
@@ -836,6 +847,12 @@  static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
 #define BMA180_PM_OPS NULL
 #endif
 
+static const struct acpi_device_id bma180_acpi_match[] = {
+	{ "BMA250E", BMA250 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, bma180_acpi_match);
+
 static struct i2c_device_id bma180_ids[] = {
 	{ "bma180", BMA180 },
 	{ "bma250", BMA250 },
@@ -847,6 +864,7 @@  MODULE_DEVICE_TABLE(i2c, bma180_ids);
 static struct i2c_driver bma180_driver = {
 	.driver = {
 		.name	= "bma180",
+		.acpi_match_table = ACPI_PTR(bma180_acpi_match),
 		.pm	= BMA180_PM_OPS,
 	},
 	.probe		= bma180_probe,