From patchwork Fri May 26 08:20:54 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Wolfram Sang X-Patchwork-Id: 9749963 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 7F7E76037E for ; Fri, 26 May 2017 08:22:56 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 674422808F for ; Fri, 26 May 2017 08:22:56 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 5BE82280DE; Fri, 26 May 2017 08:22:56 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 71C1D2808F for ; Fri, 26 May 2017 08:22:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1947250AbdEZIWt (ORCPT ); Fri, 26 May 2017 04:22:49 -0400 Received: from sauhun.de ([88.99.104.3]:44339 "EHLO pokefinder.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S937083AbdEZIVP (ORCPT ); Fri, 26 May 2017 04:21:15 -0400 Received: from localhost (p54B3341B.dip0.t-ipconnect.de [84.179.52.27]) by pokefinder.org (Postfix) with ESMTPSA id 439082C2FE5; Fri, 26 May 2017 10:21:12 +0200 (CEST) From: Wolfram Sang To: linux-i2c@vger.kernel.org Cc: Jean Delvare , linux-acpi@vger.kernel.org, Wolfram Sang , Jonathan Corbet , Steven Rostedt , Ingo Molnar , linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/8] i2c: break out smbus support into seperate file Date: Fri, 26 May 2017 10:20:54 +0200 Message-Id: <20170526082101.4746-4-wsa@the-dreams.de> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170526082101.4746-1-wsa@the-dreams.de> References: <20170526082101.4746-1-wsa@the-dreams.de> MIME-Version: 1.0 Sender: linux-acpi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-acpi@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Break out the exported SMBus functions and the emulation layer into a seperate file. This also involved splitting up the tracing header into an I2C and an SMBus part. Signed-off-by: Wolfram Sang --- Documentation/driver-api/i2c.rst | 3 + drivers/i2c/Makefile | 2 +- drivers/i2c/i2c-core-base.c | 574 ------------------------------------- drivers/i2c/i2c-core-smbus.c | 594 +++++++++++++++++++++++++++++++++++++++ include/trace/events/i2c.h | 226 +-------------- include/trace/events/smbus.h | 249 ++++++++++++++++ 6 files changed, 849 insertions(+), 799 deletions(-) create mode 100644 drivers/i2c/i2c-core-smbus.c create mode 100644 include/trace/events/smbus.h diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst index 67366d9ff7303f..7582c079d74795 100644 --- a/Documentation/driver-api/i2c.rst +++ b/Documentation/driver-api/i2c.rst @@ -43,3 +43,6 @@ i2c_adapter devices which don't support those I2C operations. .. kernel-doc:: drivers/i2c/i2c-core-base.c :export: + +.. kernel-doc:: drivers/i2c/i2c-core-smbus.c + :export: diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 6c54716e7f28ca..a6a90fe2db887a 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o -i2c-core-objs := i2c-core-base.o +i2c-core-objs := i2c-core-base.o i2c-core-smbus.o i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 88c0ca664a7b8f..70fc4624c69c25 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -14,9 +14,6 @@ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki . - All SMBus-related things are written by Frodo Looijaard - SMBus 2.0 support by Mark Studebaker and - Jean Delvare Mux support by Rodolfo Giometti and Michael Lawnick OF support is copyright (c) 2008 Jochen Friedrich @@ -3155,577 +3152,6 @@ void i2c_put_adapter(struct i2c_adapter *adap) } EXPORT_SYMBOL(i2c_put_adapter); -/* The SMBus parts */ - -#define POLY (0x1070U << 3) -static u8 crc8(u16 data) -{ - int i; - - for (i = 0; i < 8; i++) { - if (data & 0x8000) - data = data ^ POLY; - data = data << 1; - } - return (u8)(data >> 8); -} - -/* Incremental CRC8 over count bytes in the array pointed to by p */ -static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) -{ - int i; - - for (i = 0; i < count; i++) - crc = crc8((crc ^ p[i]) << 8); - return crc; -} - -/* Assume a 7-bit address, which is reasonable for SMBus */ -static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) -{ - /* The address will be sent first */ - u8 addr = i2c_8bit_addr_from_msg(msg); - pec = i2c_smbus_pec(pec, &addr, 1); - - /* The data buffer follows */ - return i2c_smbus_pec(pec, msg->buf, msg->len); -} - -/* Used for write only transactions */ -static inline void i2c_smbus_add_pec(struct i2c_msg *msg) -{ - msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); - msg->len++; -} - -/* Return <0 on CRC error - If there was a write before this read (most cases) we need to take the - partial CRC from the write part into account. - Note that this function does modify the message (we need to decrease the - message length to hide the CRC byte from the caller). */ -static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) -{ - u8 rpec = msg->buf[--msg->len]; - cpec = i2c_smbus_msg_pec(cpec, msg); - - if (rpec != cpec) { - pr_debug("Bad PEC 0x%02x vs. 0x%02x\n", - rpec, cpec); - return -EBADMSG; - } - return 0; -} - -/** - * i2c_smbus_read_byte - SMBus "receive byte" protocol - * @client: Handle to slave device - * - * This executes the SMBus "receive byte" protocol, returning negative errno - * else the byte received from the device. - */ -s32 i2c_smbus_read_byte(const struct i2c_client *client) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, 0, - I2C_SMBUS_BYTE, &data); - return (status < 0) ? status : data.byte; -} -EXPORT_SYMBOL(i2c_smbus_read_byte); - -/** - * i2c_smbus_write_byte - SMBus "send byte" protocol - * @client: Handle to slave device - * @value: Byte to be sent - * - * This executes the SMBus "send byte" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value) -{ - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); -} -EXPORT_SYMBOL(i2c_smbus_write_byte); - -/** - * i2c_smbus_read_byte_data - SMBus "read byte" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * - * This executes the SMBus "read byte" protocol, returning negative errno - * else a data byte received from the device. - */ -s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_BYTE_DATA, &data); - return (status < 0) ? status : data.byte; -} -EXPORT_SYMBOL(i2c_smbus_read_byte_data); - -/** - * i2c_smbus_write_byte_data - SMBus "write byte" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @value: Byte being written - * - * This executes the SMBus "write byte" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command, - u8 value) -{ - union i2c_smbus_data data; - data.byte = value; - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_BYTE_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_byte_data); - -/** - * i2c_smbus_read_word_data - SMBus "read word" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * - * This executes the SMBus "read word" protocol, returning negative errno - * else a 16-bit unsigned "word" received from the device. - */ -s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_WORD_DATA, &data); - return (status < 0) ? status : data.word; -} -EXPORT_SYMBOL(i2c_smbus_read_word_data); - -/** - * i2c_smbus_write_word_data - SMBus "write word" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @value: 16-bit "word" being written - * - * This executes the SMBus "write word" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command, - u16 value) -{ - union i2c_smbus_data data; - data.word = value; - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_WORD_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_word_data); - -/** - * i2c_smbus_read_block_data - SMBus "block read" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @values: Byte array into which data will be read; big enough to hold - * the data returned by the slave. SMBus allows at most 32 bytes. - * - * This executes the SMBus "block read" protocol, returning negative errno - * else the number of data bytes in the slave's response. - * - * Note that using this function requires that the client's adapter support - * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers - * support this; its emulation through I2C messaging relies on a specific - * mechanism (I2C_M_RECV_LEN) which may not be implemented. - */ -s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command, - u8 *values) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_BLOCK_DATA, &data); - if (status) - return status; - - memcpy(values, &data.block[1], data.block[0]); - return data.block[0]; -} -EXPORT_SYMBOL(i2c_smbus_read_block_data); - -/** - * i2c_smbus_write_block_data - SMBus "block write" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @length: Size of data block; SMBus allows at most 32 bytes - * @values: Byte array which will be written. - * - * This executes the SMBus "block write" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command, - u8 length, const u8 *values) -{ - union i2c_smbus_data data; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - data.block[0] = length; - memcpy(&data.block[1], values, length); - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_BLOCK_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_block_data); - -/* Returns the number of read bytes */ -s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command, - u8 length, u8 *values) -{ - union i2c_smbus_data data; - int status; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - data.block[0] = length; - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_I2C_BLOCK_DATA, &data); - if (status < 0) - return status; - - memcpy(values, &data.block[1], data.block[0]); - return data.block[0]; -} -EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); - -s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, - u8 length, const u8 *values) -{ - union i2c_smbus_data data; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - data.block[0] = length; - memcpy(data.block + 1, values, length); - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_I2C_BLOCK_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); - -/* Simulate a SMBus command using the i2c protocol - No checking of parameters is done! */ -static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, - unsigned short flags, - char read_write, u8 command, int size, - union i2c_smbus_data *data) -{ - /* So we need to generate a series of msgs. In the case of writing, we - need to use only one message; when reading, we need two. We initialize - most things with sane defaults, to keep the code below somewhat - simpler. */ - unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; - unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; - int num = read_write == I2C_SMBUS_READ ? 2 : 1; - int i; - u8 partial_pec = 0; - int status; - struct i2c_msg msg[2] = { - { - .addr = addr, - .flags = flags, - .len = 1, - .buf = msgbuf0, - }, { - .addr = addr, - .flags = flags | I2C_M_RD, - .len = 0, - .buf = msgbuf1, - }, - }; - - msgbuf0[0] = command; - switch (size) { - case I2C_SMBUS_QUICK: - msg[0].len = 0; - /* Special case: The read/write field is used as data */ - msg[0].flags = flags | (read_write == I2C_SMBUS_READ ? - I2C_M_RD : 0); - num = 1; - break; - case I2C_SMBUS_BYTE: - if (read_write == I2C_SMBUS_READ) { - /* Special case: only a read! */ - msg[0].flags = I2C_M_RD | flags; - num = 1; - } - break; - case I2C_SMBUS_BYTE_DATA: - if (read_write == I2C_SMBUS_READ) - msg[1].len = 1; - else { - msg[0].len = 2; - msgbuf0[1] = data->byte; - } - break; - case I2C_SMBUS_WORD_DATA: - if (read_write == I2C_SMBUS_READ) - msg[1].len = 2; - else { - msg[0].len = 3; - msgbuf0[1] = data->word & 0xff; - msgbuf0[2] = data->word >> 8; - } - break; - case I2C_SMBUS_PROC_CALL: - num = 2; /* Special case */ - read_write = I2C_SMBUS_READ; - msg[0].len = 3; - msg[1].len = 2; - msgbuf0[1] = data->word & 0xff; - msgbuf0[2] = data->word >> 8; - break; - case I2C_SMBUS_BLOCK_DATA: - if (read_write == I2C_SMBUS_READ) { - msg[1].flags |= I2C_M_RECV_LEN; - msg[1].len = 1; /* block length will be added by - the underlying bus driver */ - } else { - msg[0].len = data->block[0] + 2; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } - for (i = 1; i < msg[0].len; i++) - msgbuf0[i] = data->block[i-1]; - } - break; - case I2C_SMBUS_BLOCK_PROC_CALL: - num = 2; /* Another special case */ - read_write = I2C_SMBUS_READ; - if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } - msg[0].len = data->block[0] + 2; - for (i = 1; i < msg[0].len; i++) - msgbuf0[i] = data->block[i-1]; - msg[1].flags |= I2C_M_RECV_LEN; - msg[1].len = 1; /* block length will be added by - the underlying bus driver */ - break; - case I2C_SMBUS_I2C_BLOCK_DATA: - if (read_write == I2C_SMBUS_READ) { - msg[1].len = data->block[0]; - } else { - msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } - for (i = 1; i <= data->block[0]; i++) - msgbuf0[i] = data->block[i]; - } - break; - default: - dev_err(&adapter->dev, "Unsupported transaction %d\n", size); - return -EOPNOTSUPP; - } - - i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK - && size != I2C_SMBUS_I2C_BLOCK_DATA); - if (i) { - /* Compute PEC if first message is a write */ - if (!(msg[0].flags & I2C_M_RD)) { - if (num == 1) /* Write only */ - i2c_smbus_add_pec(&msg[0]); - else /* Write followed by read */ - partial_pec = i2c_smbus_msg_pec(0, &msg[0]); - } - /* Ask for PEC if last message is a read */ - if (msg[num-1].flags & I2C_M_RD) - msg[num-1].len++; - } - - status = i2c_transfer(adapter, msg, num); - if (status < 0) - return status; - - /* Check PEC if last message is a read */ - if (i && (msg[num-1].flags & I2C_M_RD)) { - status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); - if (status < 0) - return status; - } - - if (read_write == I2C_SMBUS_READ) - switch (size) { - case I2C_SMBUS_BYTE: - data->byte = msgbuf0[0]; - break; - case I2C_SMBUS_BYTE_DATA: - data->byte = msgbuf1[0]; - break; - case I2C_SMBUS_WORD_DATA: - case I2C_SMBUS_PROC_CALL: - data->word = msgbuf1[0] | (msgbuf1[1] << 8); - break; - case I2C_SMBUS_I2C_BLOCK_DATA: - for (i = 0; i < data->block[0]; i++) - data->block[i+1] = msgbuf1[i]; - break; - case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_PROC_CALL: - for (i = 0; i < msgbuf1[0] + 1; i++) - data->block[i] = msgbuf1[i]; - break; - } - return 0; -} - -/** - * i2c_smbus_xfer - execute SMBus protocol operations - * @adapter: Handle to I2C bus - * @addr: Address of SMBus slave on that bus - * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC) - * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE - * @command: Byte interpreted by slave, for protocols which use such bytes - * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL - * @data: Data to be read or written - * - * This executes an SMBus protocol operation, and returns a negative - * errno code else zero on success. - */ -s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - union i2c_smbus_data *data) -{ - unsigned long orig_jiffies; - int try; - s32 res; - - /* If enabled, the following two tracepoints are conditional on - * read_write and protocol. - */ - trace_smbus_write(adapter, addr, flags, read_write, - command, protocol, data); - trace_smbus_read(adapter, addr, flags, read_write, - command, protocol); - - flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB; - - if (adapter->algo->smbus_xfer) { - i2c_lock_bus(adapter, I2C_LOCK_SEGMENT); - - /* Retry automatically on arbitration loss */ - orig_jiffies = jiffies; - for (res = 0, try = 0; try <= adapter->retries; try++) { - res = adapter->algo->smbus_xfer(adapter, addr, flags, - read_write, command, - protocol, data); - if (res != -EAGAIN) - break; - if (time_after(jiffies, - orig_jiffies + adapter->timeout)) - break; - } - i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT); - - if (res != -EOPNOTSUPP || !adapter->algo->master_xfer) - goto trace; - /* - * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't - * implement native support for the SMBus operation. - */ - } - - res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write, - command, protocol, data); - -trace: - /* If enabled, the reply tracepoint is conditional on read_write. */ - trace_smbus_reply(adapter, addr, flags, read_write, - command, protocol, data); - trace_smbus_result(adapter, addr, flags, read_write, - command, protocol, res); - - return res; -} -EXPORT_SYMBOL(i2c_smbus_xfer); - -/** - * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes - * @values: Byte array into which data will be read; big enough to hold - * the data returned by the slave. SMBus allows at most - * I2C_SMBUS_BLOCK_MAX bytes. - * - * This executes the SMBus "block read" protocol if supported by the adapter. - * If block read is not supported, it emulates it using either word or byte - * read protocols depending on availability. - * - * The addresses of the I2C slave device that are accessed with this function - * must be mapped to a linear region, so that a block read will have the same - * effect as a byte read. Before using this function you must double-check - * if the I2C slave does support exchanging a block transfer with a byte - * transfer. - */ -s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, - u8 command, u8 length, u8 *values) -{ - u8 i = 0; - int status; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) - return i2c_smbus_read_i2c_block_data(client, command, length, values); - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) - return -EOPNOTSUPP; - - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) { - while ((i + 2) <= length) { - status = i2c_smbus_read_word_data(client, command + i); - if (status < 0) - return status; - values[i] = status & 0xff; - values[i + 1] = status >> 8; - i += 2; - } - } - - while (i < length) { - status = i2c_smbus_read_byte_data(client, command + i); - if (status < 0) - return status; - values[i] = status; - i++; - } - - return i; -} -EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); - MODULE_AUTHOR("Simon G. Vogl "); MODULE_DESCRIPTION("I2C-Bus main module"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c new file mode 100644 index 00000000000000..10f00a82ec9dba --- /dev/null +++ b/drivers/i2c/i2c-core-smbus.c @@ -0,0 +1,594 @@ +/* + * Linux I2C core SMBus and SMBus emulation code + * + * This file contains the SMBus functions which are always included in the I2C + * core because they can be emulated via I2C. SMBus specific extensions + * (e.g. smbalert) are handled in a seperate i2c-smbus module. + * + * All SMBus-related things are written by Frodo Looijaard + * SMBus 2.0 support by Mark Studebaker and + * Jean Delvare + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ +#include +#include +#include + +#define CREATE_TRACE_POINTS +#include + + +/* The SMBus parts */ + +#define POLY (0x1070U << 3) +static u8 crc8(u16 data) +{ + int i; + + for (i = 0; i < 8; i++) { + if (data & 0x8000) + data = data ^ POLY; + data = data << 1; + } + return (u8)(data >> 8); +} + +/* Incremental CRC8 over count bytes in the array pointed to by p */ +static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) +{ + int i; + + for (i = 0; i < count; i++) + crc = crc8((crc ^ p[i]) << 8); + return crc; +} + +/* Assume a 7-bit address, which is reasonable for SMBus */ +static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) +{ + /* The address will be sent first */ + u8 addr = i2c_8bit_addr_from_msg(msg); + pec = i2c_smbus_pec(pec, &addr, 1); + + /* The data buffer follows */ + return i2c_smbus_pec(pec, msg->buf, msg->len); +} + +/* Used for write only transactions */ +static inline void i2c_smbus_add_pec(struct i2c_msg *msg) +{ + msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); + msg->len++; +} + +/* Return <0 on CRC error + If there was a write before this read (most cases) we need to take the + partial CRC from the write part into account. + Note that this function does modify the message (we need to decrease the + message length to hide the CRC byte from the caller). */ +static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) +{ + u8 rpec = msg->buf[--msg->len]; + cpec = i2c_smbus_msg_pec(cpec, msg); + + if (rpec != cpec) { + pr_debug("Bad PEC 0x%02x vs. 0x%02x\n", + rpec, cpec); + return -EBADMSG; + } + return 0; +} + +/** + * i2c_smbus_read_byte - SMBus "receive byte" protocol + * @client: Handle to slave device + * + * This executes the SMBus "receive byte" protocol, returning negative errno + * else the byte received from the device. + */ +s32 i2c_smbus_read_byte(const struct i2c_client *client) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte); + +/** + * i2c_smbus_write_byte - SMBus "send byte" protocol + * @client: Handle to slave device + * @value: Byte to be sent + * + * This executes the SMBus "send byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value) +{ + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); +} +EXPORT_SYMBOL(i2c_smbus_write_byte); + +/** + * i2c_smbus_read_byte_data - SMBus "read byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read byte" protocol, returning negative errno + * else a data byte received from the device. + */ +s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte_data); + +/** + * i2c_smbus_write_byte_data - SMBus "write byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: Byte being written + * + * This executes the SMBus "write byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command, + u8 value) +{ + union i2c_smbus_data data; + data.byte = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BYTE_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_byte_data); + +/** + * i2c_smbus_read_word_data - SMBus "read word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read word" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ +s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_WORD_DATA, &data); + return (status < 0) ? status : data.word; +} +EXPORT_SYMBOL(i2c_smbus_read_word_data); + +/** + * i2c_smbus_write_word_data - SMBus "write word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "write word" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command, + u16 value) +{ + union i2c_smbus_data data; + data.word = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_WORD_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_word_data); + +/** + * i2c_smbus_read_block_data - SMBus "block read" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most 32 bytes. + * + * This executes the SMBus "block read" protocol, returning negative errno + * else the number of data bytes in the slave's response. + * + * Note that using this function requires that the client's adapter support + * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers + * support this; its emulation through I2C messaging relies on a specific + * mechanism (I2C_M_RECV_LEN) which may not be implemented. + */ +s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command, + u8 *values) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BLOCK_DATA, &data); + if (status) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_block_data); + +/** + * i2c_smbus_write_block_data - SMBus "block write" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most 32 bytes + * @values: Byte array which will be written. + * + * This executes the SMBus "block write" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(&data.block[1], values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_block_data); + +/* Returns the number of read bytes */ +s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, u8 *values) +{ + union i2c_smbus_data data; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); + if (status < 0) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); + +s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(data.block + 1, values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); + +/* Simulate a SMBus command using the i2c protocol + No checking of parameters is done! */ +static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, + char read_write, u8 command, int size, + union i2c_smbus_data *data) +{ + /* So we need to generate a series of msgs. In the case of writing, we + need to use only one message; when reading, we need two. We initialize + most things with sane defaults, to keep the code below somewhat + simpler. */ + unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; + unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; + int num = read_write == I2C_SMBUS_READ ? 2 : 1; + int i; + u8 partial_pec = 0; + int status; + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = flags, + .len = 1, + .buf = msgbuf0, + }, { + .addr = addr, + .flags = flags | I2C_M_RD, + .len = 0, + .buf = msgbuf1, + }, + }; + + msgbuf0[0] = command; + switch (size) { + case I2C_SMBUS_QUICK: + msg[0].len = 0; + /* Special case: The read/write field is used as data */ + msg[0].flags = flags | (read_write == I2C_SMBUS_READ ? + I2C_M_RD : 0); + num = 1; + break; + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_READ) { + /* Special case: only a read! */ + msg[0].flags = I2C_M_RD | flags; + num = 1; + } + break; + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 1; + else { + msg[0].len = 2; + msgbuf0[1] = data->byte; + } + break; + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 2; + else { + msg[0].len = 3; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + } + break; + case I2C_SMBUS_PROC_CALL: + num = 2; /* Special case */ + read_write = I2C_SMBUS_READ; + msg[0].len = 3; + msg[1].len = 2; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + break; + case I2C_SMBUS_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + } else { + msg[0].len = data->block[0] + 2; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + } + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + num = 2; /* Another special case */ + read_write = I2C_SMBUS_READ; + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + msg[0].len = data->block[0] + 2; + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].len = data->block[0]; + } else { + msg[0].len = data->block[0] + 1; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i <= data->block[0]; i++) + msgbuf0[i] = data->block[i]; + } + break; + default: + dev_err(&adapter->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA); + if (i) { + /* Compute PEC if first message is a write */ + if (!(msg[0].flags & I2C_M_RD)) { + if (num == 1) /* Write only */ + i2c_smbus_add_pec(&msg[0]); + else /* Write followed by read */ + partial_pec = i2c_smbus_msg_pec(0, &msg[0]); + } + /* Ask for PEC if last message is a read */ + if (msg[num-1].flags & I2C_M_RD) + msg[num-1].len++; + } + + status = i2c_transfer(adapter, msg, num); + if (status < 0) + return status; + + /* Check PEC if last message is a read */ + if (i && (msg[num-1].flags & I2C_M_RD)) { + status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); + if (status < 0) + return status; + } + + if (read_write == I2C_SMBUS_READ) + switch (size) { + case I2C_SMBUS_BYTE: + data->byte = msgbuf0[0]; + break; + case I2C_SMBUS_BYTE_DATA: + data->byte = msgbuf1[0]; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + data->word = msgbuf1[0] | (msgbuf1[1] << 8); + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + for (i = 0; i < data->block[0]; i++) + data->block[i+1] = msgbuf1[i]; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + for (i = 0; i < msgbuf1[0] + 1; i++) + data->block[i] = msgbuf1[i]; + break; + } + return 0; +} + +/** + * i2c_smbus_xfer - execute SMBus protocol operations + * @adapter: Handle to I2C bus + * @addr: Address of SMBus slave on that bus + * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC) + * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE + * @command: Byte interpreted by slave, for protocols which use such bytes + * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL + * @data: Data to be read or written + * + * This executes an SMBus protocol operation, and returns a negative + * errno code else zero on success. + */ +s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + union i2c_smbus_data *data) +{ + unsigned long orig_jiffies; + int try; + s32 res; + + /* If enabled, the following two tracepoints are conditional on + * read_write and protocol. + */ + trace_smbus_write(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_read(adapter, addr, flags, read_write, + command, protocol); + + flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB; + + if (adapter->algo->smbus_xfer) { + i2c_lock_bus(adapter, I2C_LOCK_SEGMENT); + + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= adapter->retries; try++) { + res = adapter->algo->smbus_xfer(adapter, addr, flags, + read_write, command, + protocol, data); + if (res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + adapter->timeout)) + break; + } + i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT); + + if (res != -EOPNOTSUPP || !adapter->algo->master_xfer) + goto trace; + /* + * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't + * implement native support for the SMBus operation. + */ + } + + res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write, + command, protocol, data); + +trace: + /* If enabled, the reply tracepoint is conditional on read_write. */ + trace_smbus_reply(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_result(adapter, addr, flags, read_write, + command, protocol, res); + + return res; +} +EXPORT_SYMBOL(i2c_smbus_xfer); + +/** + * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most + * I2C_SMBUS_BLOCK_MAX bytes. + * + * This executes the SMBus "block read" protocol if supported by the adapter. + * If block read is not supported, it emulates it using either word or byte + * read protocols depending on availability. + * + * The addresses of the I2C slave device that are accessed with this function + * must be mapped to a linear region, so that a block read will have the same + * effect as a byte read. Before using this function you must double-check + * if the I2C slave does support exchanging a block transfer with a byte + * transfer. + */ +s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, + u8 command, u8 length, u8 *values) +{ + u8 i = 0; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return i2c_smbus_read_i2c_block_data(client, command, length, values); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) + return -EOPNOTSUPP; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) { + while ((i + 2) <= length) { + status = i2c_smbus_read_word_data(client, command + i); + if (status < 0) + return status; + values[i] = status & 0xff; + values[i + 1] = status >> 8; + i += 2; + } + } + + while (i < length) { + status = i2c_smbus_read_byte_data(client, command + i); + if (status < 0) + return status; + values[i] = status; + i++; + } + + return i; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h index 4abb8eab34d319..86a401190df9de 100644 --- a/include/trace/events/i2c.h +++ b/include/trace/events/i2c.h @@ -1,4 +1,4 @@ -/* I2C and SMBUS message transfer tracepoints +/* I2C message transfer tracepoints * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -18,7 +18,7 @@ #include /* - * drivers/i2c/i2c-core.c + * drivers/i2c/i2c-core-base.c */ extern int i2c_transfer_trace_reg(void); extern void i2c_transfer_trace_unreg(void); @@ -144,228 +144,6 @@ TRACE_EVENT_FN(i2c_result, i2c_transfer_trace_reg, i2c_transfer_trace_unreg); -/* - * i2c_smbus_xfer() write data or procedure call request - */ -TRACE_EVENT_CONDITION(smbus_write, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - const union i2c_smbus_data *data), - TP_ARGS(adap, addr, flags, read_write, command, protocol, data), - TP_CONDITION(read_write == I2C_SMBUS_WRITE || - protocol == I2C_SMBUS_PROC_CALL || - protocol == I2C_SMBUS_BLOCK_PROC_CALL), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, addr ) - __field(__u16, flags ) - __field(__u8, command ) - __field(__u8, len ) - __field(__u32, protocol ) - __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->command = command; - __entry->protocol = protocol; - - switch (protocol) { - case I2C_SMBUS_BYTE_DATA: - __entry->len = 1; - goto copy; - case I2C_SMBUS_WORD_DATA: - case I2C_SMBUS_PROC_CALL: - __entry->len = 2; - goto copy; - case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_PROC_CALL: - case I2C_SMBUS_I2C_BLOCK_DATA: - __entry->len = data->block[0] + 1; - copy: - memcpy(__entry->buf, data->block, __entry->len); - break; - case I2C_SMBUS_QUICK: - case I2C_SMBUS_BYTE: - case I2C_SMBUS_I2C_BLOCK_BROKEN: - default: - __entry->len = 0; - } - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), - __entry->len, - __entry->len, __entry->buf - )); - -/* - * i2c_smbus_xfer() read data request - */ -TRACE_EVENT_CONDITION(smbus_read, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol), - TP_ARGS(adap, addr, flags, read_write, command, protocol), - TP_CONDITION(!(read_write == I2C_SMBUS_WRITE || - protocol == I2C_SMBUS_PROC_CALL || - protocol == I2C_SMBUS_BLOCK_PROC_CALL)), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, flags ) - __field(__u16, addr ) - __field(__u8, command ) - __field(__u32, protocol ) - __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->command = command; - __entry->protocol = protocol; - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }) - )); - -/* - * i2c_smbus_xfer() read data or procedure call reply - */ -TRACE_EVENT_CONDITION(smbus_reply, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - const union i2c_smbus_data *data), - TP_ARGS(adap, addr, flags, read_write, command, protocol, data), - TP_CONDITION(read_write == I2C_SMBUS_READ), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, addr ) - __field(__u16, flags ) - __field(__u8, command ) - __field(__u8, len ) - __field(__u32, protocol ) - __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->command = command; - __entry->protocol = protocol; - - switch (protocol) { - case I2C_SMBUS_BYTE: - case I2C_SMBUS_BYTE_DATA: - __entry->len = 1; - goto copy; - case I2C_SMBUS_WORD_DATA: - case I2C_SMBUS_PROC_CALL: - __entry->len = 2; - goto copy; - case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_PROC_CALL: - case I2C_SMBUS_I2C_BLOCK_DATA: - __entry->len = data->block[0] + 1; - copy: - memcpy(__entry->buf, data->block, __entry->len); - break; - case I2C_SMBUS_QUICK: - case I2C_SMBUS_I2C_BLOCK_BROKEN: - default: - __entry->len = 0; - } - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), - __entry->len, - __entry->len, __entry->buf - )); - -/* - * i2c_smbus_xfer() result - */ -TRACE_EVENT(smbus_result, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - int res), - TP_ARGS(adap, addr, flags, read_write, command, protocol, res), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, addr ) - __field(__u16, flags ) - __field(__u8, read_write ) - __field(__u8, command ) - __field(__s16, res ) - __field(__u32, protocol ) - ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->read_write = read_write; - __entry->command = command; - __entry->protocol = protocol; - __entry->res = res; - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), - __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd", - __entry->res - )); - #endif /* _TRACE_I2C_H */ /* This part must be outside protection */ diff --git a/include/trace/events/smbus.h b/include/trace/events/smbus.h new file mode 100644 index 00000000000000..d2fb6e1d3e10a2 --- /dev/null +++ b/include/trace/events/smbus.h @@ -0,0 +1,249 @@ +/* SMBUS message transfer tracepoints + * + * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM smbus + +#if !defined(_TRACE_SMBUS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SMBUS_H + +#include +#include + +/* + * drivers/i2c/i2c-core-smbus.c + */ + +/* + * i2c_smbus_xfer() write data or procedure call request + */ +TRACE_EVENT_CONDITION(smbus_write, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + const union i2c_smbus_data *data), + TP_ARGS(adap, addr, flags, read_write, command, protocol, data), + TP_CONDITION(read_write == I2C_SMBUS_WRITE || + protocol == I2C_SMBUS_PROC_CALL || + protocol == I2C_SMBUS_BLOCK_PROC_CALL), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, addr ) + __field(__u16, flags ) + __field(__u8, command ) + __field(__u8, len ) + __field(__u32, protocol ) + __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->command = command; + __entry->protocol = protocol; + + switch (protocol) { + case I2C_SMBUS_BYTE_DATA: + __entry->len = 1; + goto copy; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + __entry->len = 2; + goto copy; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + case I2C_SMBUS_I2C_BLOCK_DATA: + __entry->len = data->block[0] + 1; + copy: + memcpy(__entry->buf, data->block, __entry->len); + break; + case I2C_SMBUS_QUICK: + case I2C_SMBUS_BYTE: + case I2C_SMBUS_I2C_BLOCK_BROKEN: + default: + __entry->len = 0; + } + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), + __entry->len, + __entry->len, __entry->buf + )); + +/* + * i2c_smbus_xfer() read data request + */ +TRACE_EVENT_CONDITION(smbus_read, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol), + TP_ARGS(adap, addr, flags, read_write, command, protocol), + TP_CONDITION(!(read_write == I2C_SMBUS_WRITE || + protocol == I2C_SMBUS_PROC_CALL || + protocol == I2C_SMBUS_BLOCK_PROC_CALL)), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, flags ) + __field(__u16, addr ) + __field(__u8, command ) + __field(__u32, protocol ) + __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->command = command; + __entry->protocol = protocol; + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }) + )); + +/* + * i2c_smbus_xfer() read data or procedure call reply + */ +TRACE_EVENT_CONDITION(smbus_reply, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + const union i2c_smbus_data *data), + TP_ARGS(adap, addr, flags, read_write, command, protocol, data), + TP_CONDITION(read_write == I2C_SMBUS_READ), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, addr ) + __field(__u16, flags ) + __field(__u8, command ) + __field(__u8, len ) + __field(__u32, protocol ) + __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->command = command; + __entry->protocol = protocol; + + switch (protocol) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + __entry->len = 1; + goto copy; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + __entry->len = 2; + goto copy; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + case I2C_SMBUS_I2C_BLOCK_DATA: + __entry->len = data->block[0] + 1; + copy: + memcpy(__entry->buf, data->block, __entry->len); + break; + case I2C_SMBUS_QUICK: + case I2C_SMBUS_I2C_BLOCK_BROKEN: + default: + __entry->len = 0; + } + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), + __entry->len, + __entry->len, __entry->buf + )); + +/* + * i2c_smbus_xfer() result + */ +TRACE_EVENT(smbus_result, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + int res), + TP_ARGS(adap, addr, flags, read_write, command, protocol, res), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, addr ) + __field(__u16, flags ) + __field(__u8, read_write ) + __field(__u8, command ) + __field(__s16, res ) + __field(__u32, protocol ) + ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->read_write = read_write; + __entry->command = command; + __entry->protocol = protocol; + __entry->res = res; + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), + __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd", + __entry->res + )); + +#endif /* _TRACE_SMBUS_H */ + +/* This part must be outside protection */ +#include