| Message ID | 20180425233121.13270-12-jeremy.linton@arm.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
On 26/04/18 00:31, Jeremy Linton wrote: > Propagate the topology information from the PPTT tree to the > cpu_topology array. We can get the thread id and core_id by assuming > certain levels of the PPTT tree correspond to those concepts. > The package_id is flagged in the tree and can be found by calling > find_acpi_cpu_topology_package() which terminates > its search when it finds an ACPI node flagged as the physical > package. If the tree doesn't contain enough levels to represent > all of the requested levels then the root node will be returned > for all subsequent levels. > Acked-by: Sudeep Holla <sudeep.holla@arm.com> [..] > @@ -304,6 +345,8 @@ void __init init_cpu_topology(void) > * Discard anything that was parsed if we hit an error so we > * don't use partial information. > */ > - if (of_have_populated_dt() && parse_dt_topology()) > + if ((!acpi_disabled) && parse_acpi_topology()) [nit] not sure if extra () is need above, but I am fine either way.
On Tue, May 1, 2018 at 4:46 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: > > > On 26/04/18 00:31, Jeremy Linton wrote: >> Propagate the topology information from the PPTT tree to the >> cpu_topology array. We can get the thread id and core_id by assuming >> certain levels of the PPTT tree correspond to those concepts. >> The package_id is flagged in the tree and can be found by calling >> find_acpi_cpu_topology_package() which terminates >> its search when it finds an ACPI node flagged as the physical >> package. If the tree doesn't contain enough levels to represent >> all of the requested levels then the root node will be returned >> for all subsequent levels. >> > > Acked-by: Sudeep Holla <sudeep.holla@arm.com> > > [..] > >> @@ -304,6 +345,8 @@ void __init init_cpu_topology(void) >> * Discard anything that was parsed if we hit an error so we >> * don't use partial information. >> */ >> - if (of_have_populated_dt() && parse_dt_topology()) >> + if ((!acpi_disabled) && parse_acpi_topology()) > > [nit] not sure if extra () is need above, No, it isn't. > but I am fine either way. The redundant parens need to go away, really. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 05/02/2018 03:24 AM, Rafael J. Wysocki wrote: > On Tue, May 1, 2018 at 4:46 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: >> >> >> On 26/04/18 00:31, Jeremy Linton wrote: >>> Propagate the topology information from the PPTT tree to the >>> cpu_topology array. We can get the thread id and core_id by assuming >>> certain levels of the PPTT tree correspond to those concepts. >>> The package_id is flagged in the tree and can be found by calling >>> find_acpi_cpu_topology_package() which terminates >>> its search when it finds an ACPI node flagged as the physical >>> package. If the tree doesn't contain enough levels to represent >>> all of the requested levels then the root node will be returned >>> for all subsequent levels. >>> >> >> Acked-by: Sudeep Holla <sudeep.holla@arm.com> >> >> [..] >> >>> @@ -304,6 +345,8 @@ void __init init_cpu_topology(void) >>> * Discard anything that was parsed if we hit an error so we >>> * don't use partial information. >>> */ >>> - if (of_have_populated_dt() && parse_dt_topology()) >>> + if ((!acpi_disabled) && parse_acpi_topology()) >> >> [nit] not sure if extra () is need above, > > No, it isn't. > >> but I am fine either way. > > The redundant parens need to go away, really. > Yah, I missed this one, is there a linter everyone is using that finds these? Thanks, -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, May 3, 2018 at 12:35 AM, Jeremy Linton <jeremy.linton@arm.com> wrote: > Hi, > > > On 05/02/2018 03:24 AM, Rafael J. Wysocki wrote: >> >> On Tue, May 1, 2018 at 4:46 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: >>> >>> >>> >>> On 26/04/18 00:31, Jeremy Linton wrote: >>>> >>>> Propagate the topology information from the PPTT tree to the >>>> cpu_topology array. We can get the thread id and core_id by assuming >>>> certain levels of the PPTT tree correspond to those concepts. >>>> The package_id is flagged in the tree and can be found by calling >>>> find_acpi_cpu_topology_package() which terminates >>>> its search when it finds an ACPI node flagged as the physical >>>> package. If the tree doesn't contain enough levels to represent >>>> all of the requested levels then the root node will be returned >>>> for all subsequent levels. >>>> >>> >>> Acked-by: Sudeep Holla <sudeep.holla@arm.com> >>> >>> [..] >>> >>>> @@ -304,6 +345,8 @@ void __init init_cpu_topology(void) >>>> * Discard anything that was parsed if we hit an error so we >>>> * don't use partial information. >>>> */ >>>> - if (of_have_populated_dt() && parse_dt_topology()) >>>> + if ((!acpi_disabled) && parse_acpi_topology()) >>> >>> >>> [nit] not sure if extra () is need above, >> >> >> No, it isn't. >> >>> but I am fine either way. >> >> >> The redundant parens need to go away, really. >> > > Yah, I missed this one, is there a linter everyone is using that finds > these? I'm not actually sure. At least I can't recall any right away. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Apr 25, 2018 at 06:31:19PM -0500, Jeremy Linton wrote: > Propagate the topology information from the PPTT tree to the > cpu_topology array. We can get the thread id and core_id by assuming > certain levels of the PPTT tree correspond to those concepts. > The package_id is flagged in the tree and can be found by calling > find_acpi_cpu_topology_package() which terminates > its search when it finds an ACPI node flagged as the physical > package. If the tree doesn't contain enough levels to represent > all of the requested levels then the root node will be returned > for all subsequent levels. > > Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Morten Rasmussen <morten.rasmussen@arm.com> -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index dc18b1e53194..bd1aae438a31 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -11,6 +11,7 @@ * for more details. */ +#include <linux/acpi.h> #include <linux/arch_topology.h> #include <linux/cpu.h> #include <linux/cpumask.h> @@ -22,6 +23,7 @@ #include <linux/sched.h> #include <linux/sched/topology.h> #include <linux/slab.h> +#include <linux/smp.h> #include <linux/string.h> #include <asm/cpu.h> @@ -296,6 +298,45 @@ static void __init reset_cpu_topology(void) } } +#ifdef CONFIG_ACPI +/* + * Propagate the topology information of the processor_topology_node tree to the + * cpu_topology array. + */ +static int __init parse_acpi_topology(void) +{ + bool is_threaded; + int cpu, topology_id; + + is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK; + + for_each_possible_cpu(cpu) { + topology_id = find_acpi_cpu_topology(cpu, 0); + if (topology_id < 0) + return topology_id; + + if (is_threaded) { + cpu_topology[cpu].thread_id = topology_id; + topology_id = find_acpi_cpu_topology(cpu, 1); + cpu_topology[cpu].core_id = topology_id; + } else { + cpu_topology[cpu].thread_id = -1; + cpu_topology[cpu].core_id = topology_id; + } + topology_id = find_acpi_cpu_topology_package(cpu); + cpu_topology[cpu].package_id = topology_id; + } + + return 0; +} + +#else +static inline int __init parse_acpi_topology(void) +{ + return -EINVAL; +} +#endif + void __init init_cpu_topology(void) { reset_cpu_topology(); @@ -304,6 +345,8 @@ void __init init_cpu_topology(void) * Discard anything that was parsed if we hit an error so we * don't use partial information. */ - if (of_have_populated_dt() && parse_dt_topology()) + if ((!acpi_disabled) && parse_acpi_topology()) + reset_cpu_topology(); + else if (of_have_populated_dt() && parse_dt_topology()) reset_cpu_topology(); }
Propagate the topology information from the PPTT tree to the cpu_topology array. We can get the thread id and core_id by assuming certain levels of the PPTT tree correspond to those concepts. The package_id is flagged in the tree and can be found by calling find_acpi_cpu_topology_package() which terminates its search when it finds an ACPI node flagged as the physical package. If the tree doesn't contain enough levels to represent all of the requested levels then the root node will be returned for all subsequent levels. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> --- arch/arm64/kernel/topology.c | 45 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-)