@@ -443,7 +443,7 @@ struct hv_pcibus_device {
struct resource *high_mmio_res;
struct completion *survey_event;
struct completion remove_event;
- struct pci_bus *pci_bus;
+ struct pci_host_bridge *bridge;
spinlock_t config_lock; /* Avoid two threads writing index page */
spinlock_t device_list_lock; /* Protect lists below */
void __iomem *cfg_addr;
@@ -1457,34 +1457,6 @@ static void prepopulate_bars(struct hv_pcibus_device *hbus)
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
}
-static struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
- struct pci_ops *ops, void *sysdata, struct list_head *resources)
-{
- int error;
- struct pci_host_bridge *bridge;
-
- bridge = pci_alloc_host_bridge(0);
- if (!bridge)
- return NULL;
-
- bridge->dev.parent = parent;
-
- list_splice_init(resources, &bridge->windows);
- bridge->sysdata = sysdata;
- bridge->busnr = bus;
- bridge->ops = ops;
-
- error = pci_register_host_bridge(bridge);
- if (error < 0)
- goto err_out;
-
- return bridge->bus;
-
-err_out:
- kfree(bridge);
- return NULL;
-}
-
/**
* create_root_hv_pci_bus() - Expose a new root PCI bus
* @hbus: Root PCI bus, as understood by this driver
@@ -1493,25 +1465,34 @@ static struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
*/
static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)
{
- /* Register the device */
- hbus->pci_bus = pci_create_root_bus(&hbus->hdev->device,
- 0, /* bus number is always zero */
- &hv_pcifront_ops,
- &hbus->sysdata,
- &hbus->resources_for_children);
- if (!hbus->pci_bus)
- return -ENODEV;
+ struct pci_host_bridge *bridge;
+ int ret;
+
+ bridge = pci_alloc_host_bridge(0);
+ if (!bridge)
+ return -ENOMEM;
- hbus->pci_bus->msi = &hbus->msi_chip;
- hbus->pci_bus->msi->dev = &hbus->hdev->device;
+ hbus->bridge = bridge;
+ bridge->dev.parent = &hbus->hdev->device;
+ list_splice_init(&hbus->resources_for_children, &bridge->windows);
+ bridge->sysdata = &hbus->sysdata;
+ bridge->ops = &hv_pcifront_ops;
+ bridge->msi = &hbus->msi_chip;
+ bridge->msi->dev = &hbus->hdev->device;
pci_lock_rescan_remove();
- pci_scan_child_bus(hbus->pci_bus);
- pci_bus_assign_resources(hbus->pci_bus);
- pci_bus_add_devices(hbus->pci_bus);
- pci_unlock_rescan_remove();
+ /* ideally we should use pci_host_probe here */
+ ret = pci_scan_root_bus_bridge(bridge);
+ if (ret < 0) {
+ pci_free_host_bridge(bridge);
+ goto error;
+ }
+ pci_bus_assign_resources(bridge->bus);
+ pci_bus_add_devices(bridge->bus);
hbus->state = hv_pcibus_installed;
- return 0;
+error:
+ pci_unlock_rescan_remove();
+ return ret;
}
struct q_res_req_compl {
@@ -1769,7 +1750,7 @@ static void pci_devices_present_work(struct work_struct *work)
* because there may have been changes.
*/
pci_lock_rescan_remove();
- pci_scan_child_bus(hbus->pci_bus);
+ pci_scan_child_bus(hbus->bridge->bus);
pci_unlock_rescan_remove();
break;
@@ -2669,8 +2650,8 @@ static int hv_pci_remove(struct hv_device *hdev)
if (hbus->state == hv_pcibus_installed) {
/* Remove the bus from PCI's point of view. */
pci_lock_rescan_remove();
- pci_stop_root_bus(hbus->pci_bus);
- pci_remove_root_bus(hbus->pci_bus);
+ pci_stop_root_bus(hbus->bridge->bus);
+ pci_remove_root_bus(hbus->bridge->bus);
pci_unlock_rescan_remove();
hbus->state = hv_pcibus_removed;
}
create_root_hv_pci_bus() uses a rather generic method of probing the host bridge, which can be simplified by just calling pci_scan_root_bus_bridge() after setting up the pci_host_bridge structure. Since we can no longer assign hbus->pci_bus in the middle, I just remove that member completely and use the pci_host_bridge instead. Ideally we'd convert it to pci_host_probe() for simplicity, but that is a bit different and I could not easily test it. Using pci_scan_root_bus_bridge should not change the behavior at all. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/pci/controller/pci-hyperv.c | 75 +++++++++++------------------ 1 file changed, 28 insertions(+), 47 deletions(-)