| Message ID | 20190528133647.3362-2-ard.biesheuvel@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | synquacer: implement ACPI gpio/interrupt support | expand |
On Tuesday, May 28, 2019 3:36:44 PM CEST Ard Biesheuvel wrote: > ACPI permits arbitrary producer->consumer interrupt links to be > described in AML, which means a topology such as the following > is perfectly legal: > > Device (EXIU) { > Name (_HID, "SCX0008") > Name (_UID, Zero) > Name (_CRS, ResourceTemplate () { > ... > }) > } > > Device (GPIO) { > Name (_HID, "SCX0007") > Name (_UID, Zero) > Name (_CRS, ResourceTemplate () { > Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE) > Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") { > 7, > } > }) > ... > } > > The EXIU in this example is the external interrupt unit as can be found > on Socionext SynQuacer based platforms, which converts a block of 32 SPIs > from arbitrary polarity/trigger into level-high, with a separate set > of config/mask/unmask/clear controls. > > The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models > this as a hierarchical domain stacked on top of the GIC's irqdomain. > Since the GIC is modeled as a DT node as well, obtaining a reference > to this irqdomain is easily done by going through the parent link. > > On ACPI systems, however, the GIC is not modeled as an object in the > namespace, and so device objects cannot refer to it directly. So in > order to obtain the irqdomain reference when driving the EXIU in ACPI > mode, we need a helper that implicitly grabs the default domain as the > parent of the hierarchy for interrupts allocated out of the global GSI > pool. > > Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> if that matters. > --- > drivers/acpi/irq.c | 26 ++++++++++++++++++++ > include/linux/acpi.h | 7 ++++++ > 2 files changed, 33 insertions(+) > > diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c > index c3b2222e2129..ce6b25a3b7a7 100644 > --- a/drivers/acpi/irq.c > +++ b/drivers/acpi/irq.c > @@ -295,3 +295,29 @@ void __init acpi_set_irq_model(enum acpi_irq_model_id model, > acpi_irq_model = model; > acpi_gsi_domain_id = fwnode; > } > + > +/** > + * acpi_irq_create_hierarchy - Create a hierarchical IRQ domain with the default > + * GSI domain as its parent. > + * @flags: Irq domain flags associated with the domain > + * @size: Size of the domain. > + * @fwnode: Optional fwnode of the interrupt controller > + * @ops: Pointer to the interrupt domain callbacks > + * @host_data: Controller private data pointer > + */ > +struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, > + unsigned int size, > + struct fwnode_handle *fwnode, > + const struct irq_domain_ops *ops, > + void *host_data) > +{ > + struct irq_domain *d = irq_find_matching_fwnode(acpi_gsi_domain_id, > + DOMAIN_BUS_ANY); > + > + if (!d) > + return NULL; > + > + return irq_domain_create_hierarchy(d, flags, size, fwnode, ops, > + host_data); > +} > +EXPORT_SYMBOL_GPL(acpi_irq_create_hierarchy); > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index 98440df7fe42..70de4bc30cea 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -23,6 +23,7 @@ > > #include <linux/errno.h> > #include <linux/ioport.h> /* for struct resource */ > +#include <linux/irqdomain.h> > #include <linux/resource_ext.h> > #include <linux/device.h> > #include <linux/property.h> > @@ -327,6 +328,12 @@ int acpi_isa_irq_to_gsi (unsigned isa_irq, u32 *gsi); > void acpi_set_irq_model(enum acpi_irq_model_id model, > struct fwnode_handle *fwnode); > > +struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, > + unsigned int size, > + struct fwnode_handle *fwnode, > + const struct irq_domain_ops *ops, > + void *host_data); > + > #ifdef CONFIG_X86_IO_APIC > extern int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity); > #else >
diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c index c3b2222e2129..ce6b25a3b7a7 100644 --- a/drivers/acpi/irq.c +++ b/drivers/acpi/irq.c @@ -295,3 +295,29 @@ void __init acpi_set_irq_model(enum acpi_irq_model_id model, acpi_irq_model = model; acpi_gsi_domain_id = fwnode; } + +/** + * acpi_irq_create_hierarchy - Create a hierarchical IRQ domain with the default + * GSI domain as its parent. + * @flags: Irq domain flags associated with the domain + * @size: Size of the domain. + * @fwnode: Optional fwnode of the interrupt controller + * @ops: Pointer to the interrupt domain callbacks + * @host_data: Controller private data pointer + */ +struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, + unsigned int size, + struct fwnode_handle *fwnode, + const struct irq_domain_ops *ops, + void *host_data) +{ + struct irq_domain *d = irq_find_matching_fwnode(acpi_gsi_domain_id, + DOMAIN_BUS_ANY); + + if (!d) + return NULL; + + return irq_domain_create_hierarchy(d, flags, size, fwnode, ops, + host_data); +} +EXPORT_SYMBOL_GPL(acpi_irq_create_hierarchy); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 98440df7fe42..70de4bc30cea 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -23,6 +23,7 @@ #include <linux/errno.h> #include <linux/ioport.h> /* for struct resource */ +#include <linux/irqdomain.h> #include <linux/resource_ext.h> #include <linux/device.h> #include <linux/property.h> @@ -327,6 +328,12 @@ int acpi_isa_irq_to_gsi (unsigned isa_irq, u32 *gsi); void acpi_set_irq_model(enum acpi_irq_model_id model, struct fwnode_handle *fwnode); +struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, + unsigned int size, + struct fwnode_handle *fwnode, + const struct irq_domain_ops *ops, + void *host_data); + #ifdef CONFIG_X86_IO_APIC extern int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity); #else
ACPI permits arbitrary producer->consumer interrupt links to be described in AML, which means a topology such as the following is perfectly legal: Device (EXIU) { Name (_HID, "SCX0008") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { ... }) } Device (GPIO) { Name (_HID, "SCX0007") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE) Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") { 7, } }) ... } The EXIU in this example is the external interrupt unit as can be found on Socionext SynQuacer based platforms, which converts a block of 32 SPIs from arbitrary polarity/trigger into level-high, with a separate set of config/mask/unmask/clear controls. The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models this as a hierarchical domain stacked on top of the GIC's irqdomain. Since the GIC is modeled as a DT node as well, obtaining a reference to this irqdomain is easily done by going through the parent link. On ACPI systems, however, the GIC is not modeled as an object in the namespace, and so device objects cannot refer to it directly. So in order to obtain the irqdomain reference when driving the EXIU in ACPI mode, we need a helper that implicitly grabs the default domain as the parent of the hierarchy for interrupts allocated out of the global GSI pool. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- drivers/acpi/irq.c | 26 ++++++++++++++++++++ include/linux/acpi.h | 7 ++++++ 2 files changed, 33 insertions(+)