@@ -66,6 +66,7 @@
#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/power_supply.h>
+#include <linux/platform_profile.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/initval.h>
@@ -9843,16 +9844,27 @@ static bool has_lapsensor;
static bool palm_state;
static bool lap_state;
-static int lapsensor_get(bool *present, bool *state)
+static int dytc_command(int command, int *output)
{
acpi_handle dytc_handle;
- int output;
- *present = false;
- if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle)))
+ if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle))) {
+ /* Platform doesn't support DYTC */
return -ENODEV;
- if (!acpi_evalf(dytc_handle, &output, NULL, "dd", DYTC_CMD_GET))
+ }
+ if (!acpi_evalf(dytc_handle, output, NULL, "dd", command))
return -EIO;
+ return 0;
+}
+
+static int lapsensor_get(bool *present, bool *state)
+{
+ int output, err;
+
+ *present = false;
+ err = dytc_command(DYTC_CMD_GET, &output);
+ if (err)
+ return err;
*present = true; /*If we get his far, we have lapmode support*/
*state = output & BIT(DYTC_GET_LAPMODE_BIT) ? true : false;
@@ -9971,6 +9983,262 @@ static struct ibm_struct proxsensor_driver_data = {
.exit = proxsensor_exit,
};
+#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE)
+
+/*************************************************************************
+ * DYTC Platform Profile interface
+ */
+
+#define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */
+#define DYTC_CMD_SET 1 /* To enable/disable IC function mode */
+#define DYTC_CMD_RESET 0x1ff /* To reset back to default */
+
+#define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */
+#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
+#define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */
+
+#define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */
+#define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */
+
+#define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */
+#define DYTC_SET_MODE_BIT 16 /* Bits 16-19 - mode setting */
+#define DYTC_SET_VALID_BIT 20 /* Bit 20 - 1 = on, 0 = off */
+
+#define DYTC_FUNCTION_STD 0 /* Function = 0, standard mode */
+#define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */
+#define DYTC_FUNCTION_MMC 11 /* Function = 11, desk mode */
+
+#define DYTC_MODE_PERFORM 2 /* High power mode aka performance */
+#define DYTC_MODE_QUIET 3 /* Low power mode aka quiet */
+#define DYTC_MODE_BALANCE 0xF /* Default mode aka balanced */
+
+#define DYTC_SET_COMMAND(function, mode, on) \
+ (DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \
+ (mode) << DYTC_SET_MODE_BIT | \
+ (on) << DYTC_SET_VALID_BIT)
+
+#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0)
+
+#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1)
+
+static bool dytc_profile_available;
+static enum platform_profile_option dytc_current_profile;
+static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
+static DEFINE_MUTEX(dytc_mutex);
+
+static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
+{
+ switch (dytcmode) {
+ case DYTC_MODE_QUIET:
+ *profile = platform_profile_low;
+ break;
+ case DYTC_MODE_BALANCE:
+ *profile = platform_profile_balanced;
+ break;
+ case DYTC_MODE_PERFORM:
+ *profile = platform_profile_perform;
+ break;
+ default: /* Unknown mode */
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode)
+{
+ switch (profile) {
+ case platform_profile_low:
+ *perfmode = DYTC_MODE_QUIET;
+ break;
+ case platform_profile_balanced:
+ *perfmode = DYTC_MODE_BALANCE;
+ break;
+ case platform_profile_perform:
+ *perfmode = DYTC_MODE_PERFORM;
+ break;
+ default: /* Unknown profile */
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/*
+ * dytc_profile_get: Function to register with platform_profile
+ * handler. Returns current platform profile.
+ */
+int dytc_profile_get(enum platform_profile_option *profile)
+{
+ *profile = dytc_current_profile;
+ return 0;
+}
+
+/*
+ * Helper function - check if we are in CQL mode and if we are
+ * - disable CQL,
+ * - run the command
+ * - enable CQL
+ * If not in CQL mode, just run the command
+ */
+int dytc_cql_command(int command, int *output)
+{
+ int err, cmd_err, dummy;
+ int cur_funcmode;
+
+ /* Determine if we are in CQL mode. This alters the commands we do */
+ err = dytc_command(DYTC_CMD_GET, output);
+ if (err)
+ return err;
+
+ cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF;
+ /* Check if we're OK to return immediately */
+ if ((command == DYTC_CMD_GET) && (cur_funcmode != DYTC_FUNCTION_CQL))
+ return 0;
+
+ if (cur_funcmode == DYTC_FUNCTION_CQL) {
+ atomic_inc(&dytc_ignore_event);
+ err = dytc_command(DYTC_DISABLE_CQL, &dummy);
+ if (err)
+ return err;
+ }
+
+ cmd_err = dytc_command(command, output);
+ /* Check return condition after we've restored CQL state */
+
+ if (cur_funcmode == DYTC_FUNCTION_CQL) {
+ err = dytc_command(DYTC_ENABLE_CQL, &dummy);
+ if (err)
+ return err;
+ }
+
+ return cmd_err;
+}
+
+/*
+ * dytc_profile_set: Function to register with platform_profile
+ * handler. Sets current platform profile.
+ */
+int dytc_profile_set(enum platform_profile_option profile)
+{
+ int output;
+ int err;
+
+ if (!dytc_profile_available)
+ return -ENODEV;
+
+ err = mutex_lock_interruptible(&dytc_mutex);
+ if (err)
+ return err;
+
+ if (profile == platform_profile_balanced) {
+ /* To get back to balanced mode we just issue a reset command */
+ err = dytc_command(DYTC_CMD_RESET, &output);
+ if (err)
+ goto unlock;
+ } else {
+ int perfmode;
+
+ err = convert_profile_to_dytc(profile, &perfmode);
+ if (err)
+ goto unlock;
+
+ /* Determine if we are in CQL mode. This alters the commands we do */
+ err = dytc_cql_command(DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), &output);
+ if (err)
+ goto unlock;
+ }
+ /* Success - update current profile */
+ dytc_current_profile = profile;
+unlock:
+ mutex_unlock(&dytc_mutex);
+ return err;
+}
+
+static void dytc_profile_refresh(void)
+{
+ enum platform_profile_option profile;
+ int output, err;
+ int perfmode;
+
+ mutex_lock(&dytc_mutex);
+ err = dytc_cql_command(DYTC_CMD_GET, &output);
+ mutex_unlock(&dytc_mutex);
+ if (err)
+ return;
+
+ perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF;
+ convert_dytc_to_profile(perfmode, &profile);
+ if (profile != dytc_current_profile) {
+ dytc_current_profile = profile;
+ platform_profile_notify();
+ }
+}
+
+static struct platform_profile_handler dytc_profile = {
+ .profile_get = dytc_profile_get,
+ .profile_set = dytc_profile_set,
+};
+
+static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
+{
+ int err, output;
+
+ /* Setup supported modes */
+ set_bit(platform_profile_low, dytc_profile.choices);
+ set_bit(platform_profile_balanced, dytc_profile.choices);
+ set_bit(platform_profile_perform, dytc_profile.choices);
+
+ dytc_profile_available = false;
+ err = dytc_command(DYTC_CMD_QUERY, &output);
+ /*
+ * If support isn't available (ENODEV) then don't return an error
+ * and don't create the sysfs group
+ */
+ if (err == -ENODEV)
+ return 0;
+ /* For all other errors we can flag the failure */
+ if (err)
+ return err;
+
+ /* Check DYTC is enabled and supports mode setting */
+ if (output & BIT(DYTC_QUERY_ENABLE_BIT)) {
+ /* Only DYTC v5.0 and later has this feature. */
+ int dytc_version;
+
+ dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
+ if (dytc_version >= 5) {
+ dbg_printk(TPACPI_DBG_INIT,
+ "DYTC version %d: thermal mode available\n", dytc_version);
+ /* Create platform_profile structure and register */
+ err = platform_profile_register(&dytc_profile);
+ /*
+ * If for some reason platform_profiles aren't enabled
+ * don't quit terminally.
+ */
+ if (err)
+ return 0;
+
+ dytc_profile_available = true;
+ /* Ensure initial values are correct */
+ dytc_profile_refresh();
+ }
+ }
+ return 0;
+}
+
+static void dytc_profile_exit(void)
+{
+ if (dytc_profile_available) {
+ dytc_profile_available = false;
+ platform_profile_unregister();
+ }
+}
+
+static struct ibm_struct dytc_profile_driver_data = {
+ .name = "dytc-profile",
+ .exit = dytc_profile_exit,
+};
+#endif /* CONFIG_ACPI_PLATFORM_PROFILE */
+
/****************************************************************************
****************************************************************************
*
@@ -10019,8 +10287,14 @@ static void tpacpi_driver_event(const unsigned int hkey_event)
mutex_unlock(&kbdlight_mutex);
}
- if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED)
+ if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) {
lapsensor_refresh();
+#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE)
+ /* If we are already accessing DYTC then skip dytc update */
+ if (!atomic_add_unless(&dytc_ignore_event, -1, 0))
+ dytc_profile_refresh();
+#endif
+ }
}
static void hotkey_driver_event(const unsigned int scancode)
@@ -10463,6 +10737,12 @@ static struct ibm_init_struct ibms_init[] __initdata = {
.init = tpacpi_proxsensor_init,
.data = &proxsensor_driver_data,
},
+#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE)
+ {
+ .init = tpacpi_dytc_profile_init,
+ .data = &dytc_profile_driver_data,
+ },
+#endif
};
static int __init set_ibm_param(const char *val, const struct kernel_param *kp)
Add support to thinkpad_acpi for Lenovo platforms that have DYTC version 5 support or newer to use the platform profile feature. This will allow users to determine and control the platform modes between low-power, balanced operation and performance modes. Signed-off-by: Mark Pearson <markpearson@lenovo.com> --- Changes in v2: Address (hopefully) all recommendations from review including: - use IS_ENABLED instead of IS_DEFINED - update driver to work with all the fixes in platform_profile update - improve error handling for invalid inputs - move tracking of current profile mode into this driver Changes in v3: - version update for patch series Changes in v4: - Rebase on top of palm sensor patch which led to a little bit of file restructuring/clean up - Use BIT macro where applicable - Formatting fixes - Check sysfs node created on exit function - implement and use DYTC_SET_COMMAND macro - in case of failure setting performance mode make sure CQL mode is enabled again before returning. - Clean up initialisation and error handling code Changes in v5: - Use atomic_int with ignoring events - Add mutex when accessing ACPI information - Clean up registration code - Use cached value in profile_get function - Add dytc_cql_command function to clean up and provide common handler - Update to work with changes in platform_profile implementation drivers/platform/x86/thinkpad_acpi.c | 292 ++++++++++++++++++++++++++- 1 file changed, 286 insertions(+), 6 deletions(-)