| Message ID | 20210108145217.2254447-3-jean-philippe@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | iommu: I/O page faults for SMMUv3 | expand |
On Fri, 8 Jan 2021 15:52:10 +0100 Jean-Philippe Brucker <jean-philippe@linaro.org> wrote: > The pasid-num-bits property shouldn't need a dedicated fwspec field, > it's a job for device properties. Add properties for IORT, and access > the number of PASID bits using device_property_read_u32(). > > Suggested-by: Robin Murphy <robin.murphy@arm.com> > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Nice Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Looks like we are fine not checking for missing properties because ssid_bits == 0 corresponds to pasid off anyway. > --- > include/linux/iommu.h | 2 -- > drivers/acpi/arm64/iort.c | 13 +++++++------ > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 3 ++- > drivers/iommu/of_iommu.c | 5 ----- > 4 files changed, 9 insertions(+), 14 deletions(-) > > diff --git a/include/linux/iommu.h b/include/linux/iommu.h > index 26bcde5e7746..583c734b2e87 100644 > --- a/include/linux/iommu.h > +++ b/include/linux/iommu.h > @@ -570,7 +570,6 @@ struct iommu_group *fsl_mc_device_group(struct device *dev); > * struct iommu_fwspec - per-device IOMMU instance data > * @ops: ops for this device's IOMMU > * @iommu_fwnode: firmware handle for this device's IOMMU > - * @num_pasid_bits: number of PASID bits supported by this device > * @num_ids: number of associated device IDs > * @ids: IDs which this device may present to the IOMMU > */ > @@ -578,7 +577,6 @@ struct iommu_fwspec { > const struct iommu_ops *ops; > struct fwnode_handle *iommu_fwnode; > u32 flags; > - u32 num_pasid_bits; > unsigned int num_ids; > u32 ids[]; > }; > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index d4eac6d7e9fb..c9a8bbb74b09 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -968,15 +968,16 @@ static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data) > static void iort_named_component_init(struct device *dev, > struct acpi_iort_node *node) > { > + struct property_entry props[2] = {}; > struct acpi_iort_named_component *nc; > - struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); > - > - if (!fwspec) > - return; > > nc = (struct acpi_iort_named_component *)node->node_data; > - fwspec->num_pasid_bits = FIELD_GET(ACPI_IORT_NC_PASID_BITS, > - nc->node_flags); > + props[0] = PROPERTY_ENTRY_U32("pasid-num-bits", > + FIELD_GET(ACPI_IORT_NC_PASID_BITS, > + nc->node_flags)); > + > + if (device_add_properties(dev, props)) > + dev_warn(dev, "Could not add device properties\n"); > } > > static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node) > diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c > index 8ca7415d785d..6a53b4edf054 100644 > --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c > +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c > @@ -2366,7 +2366,8 @@ static struct iommu_device *arm_smmu_probe_device(struct device *dev) > } > } > > - master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits); > + device_property_read_u32(dev, "pasid-num-bits", &master->ssid_bits); > + master->ssid_bits = min(smmu->ssid_bits, master->ssid_bits); > > /* > * Note that PASID must be enabled before, and disabled after ATS: > diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c > index e505b9130a1c..a9d2df001149 100644 > --- a/drivers/iommu/of_iommu.c > +++ b/drivers/iommu/of_iommu.c > @@ -210,11 +210,6 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, > of_pci_iommu_init, &info); > } else { > err = of_iommu_configure_device(master_np, dev, id); > - > - fwspec = dev_iommu_fwspec_get(dev); > - if (!err && fwspec) > - of_property_read_u32(master_np, "pasid-num-bits", > - &fwspec->num_pasid_bits); > } > > /*
diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 26bcde5e7746..583c734b2e87 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -570,7 +570,6 @@ struct iommu_group *fsl_mc_device_group(struct device *dev); * struct iommu_fwspec - per-device IOMMU instance data * @ops: ops for this device's IOMMU * @iommu_fwnode: firmware handle for this device's IOMMU - * @num_pasid_bits: number of PASID bits supported by this device * @num_ids: number of associated device IDs * @ids: IDs which this device may present to the IOMMU */ @@ -578,7 +577,6 @@ struct iommu_fwspec { const struct iommu_ops *ops; struct fwnode_handle *iommu_fwnode; u32 flags; - u32 num_pasid_bits; unsigned int num_ids; u32 ids[]; }; diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index d4eac6d7e9fb..c9a8bbb74b09 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -968,15 +968,16 @@ static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data) static void iort_named_component_init(struct device *dev, struct acpi_iort_node *node) { + struct property_entry props[2] = {}; struct acpi_iort_named_component *nc; - struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); - - if (!fwspec) - return; nc = (struct acpi_iort_named_component *)node->node_data; - fwspec->num_pasid_bits = FIELD_GET(ACPI_IORT_NC_PASID_BITS, - nc->node_flags); + props[0] = PROPERTY_ENTRY_U32("pasid-num-bits", + FIELD_GET(ACPI_IORT_NC_PASID_BITS, + nc->node_flags)); + + if (device_add_properties(dev, props)) + dev_warn(dev, "Could not add device properties\n"); } static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node) diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index 8ca7415d785d..6a53b4edf054 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -2366,7 +2366,8 @@ static struct iommu_device *arm_smmu_probe_device(struct device *dev) } } - master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits); + device_property_read_u32(dev, "pasid-num-bits", &master->ssid_bits); + master->ssid_bits = min(smmu->ssid_bits, master->ssid_bits); /* * Note that PASID must be enabled before, and disabled after ATS: diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index e505b9130a1c..a9d2df001149 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -210,11 +210,6 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, of_pci_iommu_init, &info); } else { err = of_iommu_configure_device(master_np, dev, id); - - fwspec = dev_iommu_fwspec_get(dev); - if (!err && fwspec) - of_property_read_u32(master_np, "pasid-num-bits", - &fwspec->num_pasid_bits); } /*
The pasid-num-bits property shouldn't need a dedicated fwspec field, it's a job for device properties. Add properties for IORT, and access the number of PASID bits using device_property_read_u32(). Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> --- include/linux/iommu.h | 2 -- drivers/acpi/arm64/iort.c | 13 +++++++------ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 3 ++- drivers/iommu/of_iommu.c | 5 ----- 4 files changed, 9 insertions(+), 14 deletions(-)