diff mbox series

[09/14] cxl/mem: Add a "RAW" send command

Message ID 20210130002438.1872527-10-ben.widawsky@intel.com (mailing list archive)
State Not Applicable, archived
Headers show
Series CXL 2.0 Support | expand

Commit Message

Ben Widawsky Jan. 30, 2021, 12:24 a.m. UTC
The CXL memory device send interface will have a number of supported
commands. The raw command is not such a command. Raw commands allow
userspace to send a specified opcode to the underlying hardware and
bypass all driver checks on the command. This is useful for a couple of
usecases, mainly:
1. Undocumented vendor specific hardware commands
2. Prototyping new hardware commands not yet supported by the driver

While this all sounds very powerful it comes with a couple of caveats:
1. Bug reports using raw commands will not get the same level of
   attention as bug reports using supported commands (via taint).
2. Supported commands will be rejected by the RAW command.

With this comes new debugfs knob to allow full access to your toes with
your weapon of choice.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
 Documentation/ABI/testing/debugfs-cxl |  10 ++
 drivers/cxl/mem.c                     | 130 ++++++++++++++++++++++++--
 include/uapi/linux/cxl_mem.h          |  12 ++-
 3 files changed, 142 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/ABI/testing/debugfs-cxl

Comments

Konrad Rzeszutek Wilk Feb. 1, 2021, 6:24 p.m. UTC | #1
On Fri, Jan 29, 2021 at 04:24:33PM -0800, Ben Widawsky wrote:
> The CXL memory device send interface will have a number of supported
> commands. The raw command is not such a command. Raw commands allow
> userspace to send a specified opcode to the underlying hardware and
> bypass all driver checks on the command. This is useful for a couple of
> usecases, mainly:
> 1. Undocumented vendor specific hardware commands
> 2. Prototyping new hardware commands not yet supported by the driver

This sounds like a recipe for ..

In case you really really want this may I recommend you do two things:

- Wrap this whole thing with #ifdef
  CONFIG_CXL_DEBUG_THIS_WILL_DESTROY_YOUR_LIFE

 (or something equivalant to make it clear this should never be
  enabled in production kernels).

 - Add a nice big fat printk in dmesg telling the user that they
   are creating a unstable parallel universe that will lead to their
   blood pressure going sky-high, or perhaps something more professional
   sounding.

- Rethink this. Do you really really want to encourage vendors
  to use this raw API instead of them using the proper APIs?

> 
> While this all sounds very powerful it comes with a couple of caveats:
> 1. Bug reports using raw commands will not get the same level of
>    attention as bug reports using supported commands (via taint).
> 2. Supported commands will be rejected by the RAW command.
> 
> With this comes new debugfs knob to allow full access to your toes with
> your weapon of choice.

Problem is that debugfs is no longer "debug" but is enabled in
production kernel.
Ben Widawsky Feb. 1, 2021, 7:27 p.m. UTC | #2
On 21-02-01 13:24:00, Konrad Rzeszutek Wilk wrote:
> On Fri, Jan 29, 2021 at 04:24:33PM -0800, Ben Widawsky wrote:
> > The CXL memory device send interface will have a number of supported
> > commands. The raw command is not such a command. Raw commands allow
> > userspace to send a specified opcode to the underlying hardware and
> > bypass all driver checks on the command. This is useful for a couple of
> > usecases, mainly:
> > 1. Undocumented vendor specific hardware commands
> > 2. Prototyping new hardware commands not yet supported by the driver
> 
> This sounds like a recipe for ..
> 
> In case you really really want this may I recommend you do two things:
> 
> - Wrap this whole thing with #ifdef
>   CONFIG_CXL_DEBUG_THIS_WILL_DESTROY_YOUR_LIFE
> 
>  (or something equivalant to make it clear this should never be
>   enabled in production kernels).
> 
>  - Add a nice big fat printk in dmesg telling the user that they
>    are creating a unstable parallel universe that will lead to their
>    blood pressure going sky-high, or perhaps something more professional
>    sounding.
> 
> - Rethink this. Do you really really want to encourage vendors
>   to use this raw API instead of them using the proper APIs?

Again, the ideal is proper APIs. Barring that they get a WARN, and a taint if
they use the raw commands.

> 
> > 
> > While this all sounds very powerful it comes with a couple of caveats:
> > 1. Bug reports using raw commands will not get the same level of
> >    attention as bug reports using supported commands (via taint).
> > 2. Supported commands will be rejected by the RAW command.
> > 
> > With this comes new debugfs knob to allow full access to your toes with
> > your weapon of choice.
> 
> Problem is that debugfs is no longer "debug" but is enabled in
> production kernel.

I don't see this as my problem. Again, they've been WARNed and tainted. If they
want to do this, that's their business. They will be asked to reproduce without
RAW if they file a bug report.
Konrad Rzeszutek Wilk Feb. 1, 2021, 7:34 p.m. UTC | #3
On Mon, Feb 01, 2021 at 11:27:08AM -0800, Ben Widawsky wrote:
> On 21-02-01 13:24:00, Konrad Rzeszutek Wilk wrote:
> > On Fri, Jan 29, 2021 at 04:24:33PM -0800, Ben Widawsky wrote:
> > > The CXL memory device send interface will have a number of supported
> > > commands. The raw command is not such a command. Raw commands allow
> > > userspace to send a specified opcode to the underlying hardware and
> > > bypass all driver checks on the command. This is useful for a couple of
> > > usecases, mainly:
> > > 1. Undocumented vendor specific hardware commands
> > > 2. Prototyping new hardware commands not yet supported by the driver
> > 
> > This sounds like a recipe for ..
> > 
> > In case you really really want this may I recommend you do two things:
> > 
> > - Wrap this whole thing with #ifdef
> >   CONFIG_CXL_DEBUG_THIS_WILL_DESTROY_YOUR_LIFE
> > 
> >  (or something equivalant to make it clear this should never be
> >   enabled in production kernels).
> > 
> >  - Add a nice big fat printk in dmesg telling the user that they
> >    are creating a unstable parallel universe that will lead to their
> >    blood pressure going sky-high, or perhaps something more professional
> >    sounding.
> > 
> > - Rethink this. Do you really really want to encourage vendors
> >   to use this raw API instead of them using the proper APIs?
> 
> Again, the ideal is proper APIs. Barring that they get a WARN, and a taint if
> they use the raw commands.

Linux upstream is all about proper APIs. Just don't do this.
> 
> > 
> > > 
> > > While this all sounds very powerful it comes with a couple of caveats:
> > > 1. Bug reports using raw commands will not get the same level of
> > >    attention as bug reports using supported commands (via taint).
> > > 2. Supported commands will be rejected by the RAW command.
> > > 
> > > With this comes new debugfs knob to allow full access to your toes with
> > > your weapon of choice.
> > 
> > Problem is that debugfs is no longer "debug" but is enabled in
> > production kernel.
> 
> I don't see this as my problem. Again, they've been WARNed and tainted. If they

Right not your problem, nice.

But it is going to be the problem of vendor kernel engineers who don't have this luxury.

> want to do this, that's their business. They will be asked to reproduce without
> RAW if they file a bug report.


This is not how customers see the world. "If it is there, then it is
there to used right? Why else would someone give me the keys to this?"

Just kill this. Or better yet, make it a seperate set of patches for
folks developing code but not have it as part of this patchset.



>
Dan Williams Feb. 1, 2021, 9:20 p.m. UTC | #4
On Mon, Feb 1, 2021 at 11:36 AM Konrad Rzeszutek Wilk
<konrad.wilk@oracle.com> wrote:
>
> On Mon, Feb 01, 2021 at 11:27:08AM -0800, Ben Widawsky wrote:
> > On 21-02-01 13:24:00, Konrad Rzeszutek Wilk wrote:
> > > On Fri, Jan 29, 2021 at 04:24:33PM -0800, Ben Widawsky wrote:
> > > > The CXL memory device send interface will have a number of supported
> > > > commands. The raw command is not such a command. Raw commands allow
> > > > userspace to send a specified opcode to the underlying hardware and
> > > > bypass all driver checks on the command. This is useful for a couple of
> > > > usecases, mainly:
> > > > 1. Undocumented vendor specific hardware commands
> > > > 2. Prototyping new hardware commands not yet supported by the driver
> > >
> > > This sounds like a recipe for ..
> > >
> > > In case you really really want this may I recommend you do two things:
> > >
> > > - Wrap this whole thing with #ifdef
> > >   CONFIG_CXL_DEBUG_THIS_WILL_DESTROY_YOUR_LIFE
> > >
> > >  (or something equivalant to make it clear this should never be
> > >   enabled in production kernels).
> > >
> > >  - Add a nice big fat printk in dmesg telling the user that they
> > >    are creating a unstable parallel universe that will lead to their
> > >    blood pressure going sky-high, or perhaps something more professional
> > >    sounding.
> > >
> > > - Rethink this. Do you really really want to encourage vendors
> > >   to use this raw API instead of them using the proper APIs?
> >
> > Again, the ideal is proper APIs. Barring that they get a WARN, and a taint if
> > they use the raw commands.
>
> Linux upstream is all about proper APIs. Just don't do this.
> >
> > >
> > > >
> > > > While this all sounds very powerful it comes with a couple of caveats:
> > > > 1. Bug reports using raw commands will not get the same level of
> > > >    attention as bug reports using supported commands (via taint).
> > > > 2. Supported commands will be rejected by the RAW command.
> > > >
> > > > With this comes new debugfs knob to allow full access to your toes with
> > > > your weapon of choice.
> > >
> > > Problem is that debugfs is no longer "debug" but is enabled in
> > > production kernel.
> >
> > I don't see this as my problem. Again, they've been WARNed and tainted. If they
>
> Right not your problem, nice.
>
> But it is going to be the problem of vendor kernel engineers who don't have this luxury.
>
> > want to do this, that's their business. They will be asked to reproduce without
> > RAW if they file a bug report.
>
>
> This is not how customers see the world. "If it is there, then it is
> there to used right? Why else would someone give me the keys to this?"
>
> Just kill this. Or better yet, make it a seperate set of patches for
> folks developing code but not have it as part of this patchset.

In the ACPI NFIT driver, the only protection against vendor
shenanigans is the requirement that any and all DSM functions be
described in a public specification, so there is no unfettered access
to the DSM interface However, multiple vendors just went ahead and
included a "vendor passthrough" as a DSM sub-command in their
implementation. The driver does have the "disable_vendor_specific"
module parameter, however that does not amount to much more than a
stern look from the kernel at vendors shipping functionality through
that path rather than proper functions. It has been a source of bugs.

The RAW command proposal Ben has here is a significant improvement on
that status quo. It's built on the observation that customers pick up
the phone whenever their kernel backtraces, and makes it is easy to
spot broken tooling. That said, I think it is reasonable to place the
RAW interface behind a configuration option and let distribution
policy decide the availability.
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl
new file mode 100644
index 000000000000..37e89aaac296
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-cxl
@@ -0,0 +1,10 @@ 
+What:		/sys/kernel/debug/cxl/mbox/raw_allow_all
+Date:		January 2021
+KernelVersion:	5.12
+Description:
+		Permits "RAW" mailbox commands to be passed through to hardware
+		without driver intervention. Many such commands require
+		coordination and therefore should only be used for debugging or
+		testing.
+
+		Valid values are boolean.
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index c646f0a1cf66..2942730dc967 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright(c) 2020 Intel Corporation. All rights reserved. */
 #include <uapi/linux/cxl_mem.h>
+#include <linux/debugfs.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/cdev.h>
@@ -40,7 +41,14 @@ 
 
 enum opcode {
 	CXL_MBOX_OP_INVALID		= 0x0000,
+#define CXL_MBOX_OP_RAW		CXL_MBOX_OP_INVALID
+	CXL_MBOX_OP_ACTIVATE_FW		= 0x0202,
 	CXL_MBOX_OP_IDENTIFY		= 0x4000,
+	CXL_MBOX_OP_SET_PARTITION_INFO	= 0x4101,
+	CXL_MBOX_OP_SET_LSA		= 0x4103,
+	CXL_MBOX_OP_SET_SHUTDOWN_STATE	= 0x4204,
+	CXL_MBOX_OP_SCAN_MEDIA		= 0x4304,
+	CXL_MBOX_OP_GET_SCAN_MEDIA	= 0x4305,
 	CXL_MBOX_OP_MAX			= 0x10000
 };
 
@@ -90,6 +98,8 @@  struct cxl_memdev {
 
 static int cxl_mem_major;
 static DEFINE_IDA(cxl_memdev_ida);
+static struct dentry *cxl_debugfs;
+static bool raw_allow_all;
 
 /**
  * struct cxl_mem_command - Driver representation of a memory device command
@@ -139,6 +149,47 @@  struct cxl_mem_command {
 static struct cxl_mem_command mem_commands[] = {
 	CXL_CMD(INVALID, KERNEL, 0, 0, HIDDEN),
 	CXL_CMD(IDENTIFY, NONE, 0, 0x43, MANDATORY),
+	CXL_CMD(RAW, NONE, ~0, ~0, MANDATORY),
+};
+
+/*
+ * Commands that RAW doesn't permit. The rationale for each:
+ *
+ * CXL_MBOX_OP_ACTIVATE_FW: Firmware activation requires adjustment /
+ * coordination of transaction timeout values at the root bridge level.
+ *
+ * CXL_MBOX_OP_SET_PARTITION_INFO: The device memory map may change live
+ * and needs to be coordinated with HDM updates.
+ *
+ * CXL_MBOX_OP_SET_LSA: The label storage area may be cached by the
+ * driver and any writes from userspace invalidates those contents.
+ *
+ * CXL_MBOX_OP_SET_SHUTDOWN_STATE: Set shutdown state assumes no writes
+ * to the device after it is marked clean, userspace can not make that
+ * assertion.
+ *
+ * CXL_MBOX_OP_[GET_]SCAN_MEDIA: The kernel provides a native error list that
+ * is kept up to date with patrol notifications and error management.
+ */
+static u16 disabled_raw_commands[] = {
+	CXL_MBOX_OP_ACTIVATE_FW,
+	CXL_MBOX_OP_SET_PARTITION_INFO,
+	CXL_MBOX_OP_SET_LSA,
+	CXL_MBOX_OP_SET_SHUTDOWN_STATE,
+	CXL_MBOX_OP_SCAN_MEDIA,
+	CXL_MBOX_OP_GET_SCAN_MEDIA,
+};
+
+/*
+ * Command sets that RAW doesn't permit. All opcodes in this set are
+ * disabled because they pass plain text security payloads over the
+ * user/kernel boundary. This functionality is intended to be wrapped
+ * behind the keys ABI which allows for encrypted payloads in the UAPI
+ */
+static u8 security_command_sets[] = {
+	0x44, /* Sanitize */
+	0x45, /* Persistent Memory Data-at-rest Security */
+	0x46, /* Security Passthrough */
 };
 
 #define cxl_for_each_cmd(cmd)                                                  \
@@ -180,22 +231,30 @@  static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
 	return 0;
 }
 
+static bool is_security_command(u16 opcode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(security_command_sets); i++)
+		if (security_command_sets[i] == (opcode >> 8))
+			return true;
+	return false;
+}
+
 static void cxl_mem_mbox_timeout(struct cxl_mem *cxlm,
 				 struct mbox_cmd *mbox_cmd)
 {
-	dev_warn(&cxlm->pdev->dev, "Mailbox command timed out\n");
-	dev_info(&cxlm->pdev->dev,
-		 "\topcode: 0x%04x\n"
-		 "\tpayload size: %zub\n",
-		 mbox_cmd->opcode, mbox_cmd->size_in);
+	struct device *dev = &cxlm->pdev->dev;
+
+	dev_dbg(dev, "Mailbox command (opcode: %#x size: %zub) timed out\n",
+		mbox_cmd->opcode, mbox_cmd->size_in);
 
-	if (IS_ENABLED(CONFIG_CXL_MEM_INSECURE_DEBUG)) {
+	if (!is_security_command(mbox_cmd->opcode) ||
+	    IS_ENABLED(CONFIG_CXL_MEM_INSECURE_DEBUG)) {
 		print_hex_dump_debug("Payload ", DUMP_PREFIX_OFFSET, 16, 1,
 				     mbox_cmd->payload_in, mbox_cmd->size_in,
 				     true);
 	}
-
-	/* Here's a good place to figure out if a device reset is needed */
 }
 
 /**
@@ -458,6 +517,7 @@  static int handle_mailbox_cmd_from_user(struct cxl_memdev *cxlmd,
 					struct cxl_send_command __user *u)
 {
 	struct cxl_mem *cxlm = cxlmd->cxlm;
+	struct device *dev = &cxlmd->dev;
 	struct mbox_cmd mbox_cmd = {
 		.opcode = cmd->opcode,
 		.payload_in = NULL, /* Populated with copy_from_user() */
@@ -495,13 +555,17 @@  static int handle_mailbox_cmd_from_user(struct cxl_memdev *cxlmd,
 	if (rc)
 		goto out;
 
-	dev_dbg(&cxlmd->dev,
+	dev_dbg(dev,
 		"Submitting %s command for user\n"
 		"\topcode: %x\n"
 		"\tsize: %ub\n",
 		cxl_command_names[cmd->info.id].name, mbox_cmd.opcode,
 		cmd->info.size_in);
 
+	WARN_TAINT_ONCE(cmd->info.id == CXL_MEM_COMMAND_ID_RAW,
+			TAINT_RAW_PASSTHROUGH, "%s %s: raw command path used\n",
+			dev_driver_string(dev), dev_name(dev));
+
 	rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
 	cxl_mem_mbox_put(cxlm);
 	if (rc)
@@ -532,6 +596,23 @@  static int handle_mailbox_cmd_from_user(struct cxl_memdev *cxlmd,
 	return rc;
 }
 
+static bool cxl_mem_raw_command_allowed(u16 opcode)
+{
+	int i;
+
+	if (raw_allow_all)
+		return true;
+
+	if (is_security_command(opcode))
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(disabled_raw_commands); i++)
+		if (disabled_raw_commands[i] == opcode)
+			return false;
+
+	return true;
+}
+
 /**
  * cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND.
  * @cxlm: &struct cxl_mem device whose mailbox will be used.
@@ -568,6 +649,30 @@  static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm,
 	if (send_cmd->size_in > cxlm->mbox.payload_size)
 		return -EINVAL;
 
+	/* Checks are bypassed for raw commands but along comes the taint! */
+	if (send_cmd->id == CXL_MEM_COMMAND_ID_RAW) {
+		const struct cxl_mem_command temp = {
+			.info = {
+				.id = CXL_MEM_COMMAND_ID_RAW,
+				.flags = CXL_MEM_COMMAND_FLAG_NONE,
+				.size_in = send_cmd->size_in,
+				.size_out = send_cmd->size_out,
+			},
+			.flags = 0,
+			.opcode = send_cmd->raw.opcode
+		};
+
+		if (send_cmd->raw.rsvd)
+			return -EINVAL;
+
+		if (!cxl_mem_raw_command_allowed(send_cmd->raw.opcode))
+			return -EPERM;
+
+		memcpy(out_cmd, &temp, sizeof(temp));
+
+		return 0;
+	}
+
 	if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK)
 		return -EINVAL;
 
@@ -1200,6 +1305,7 @@  static __init int cxl_mem_init(void)
 {
 	int rc;
 	dev_t devt;
+	struct dentry *mbox_debugfs;
 
 	rc = alloc_chrdev_region(&devt, 0, CXL_MEM_MAX_DEVS, "cxl");
 	if (rc)
@@ -1214,11 +1320,17 @@  static __init int cxl_mem_init(void)
 		return rc;
 	}
 
+	cxl_debugfs = debugfs_create_dir("cxl", NULL);
+	mbox_debugfs = debugfs_create_dir("mbox", cxl_debugfs);
+	debugfs_create_bool("raw_allow_all", 0600, mbox_debugfs,
+			    &raw_allow_all);
+
 	return 0;
 }
 
 static __exit void cxl_mem_exit(void)
 {
+	debugfs_remove_recursive(cxl_debugfs);
 	pci_unregister_driver(&cxl_mem_driver);
 	unregister_chrdev_region(MKDEV(cxl_mem_major, 0), CXL_MEM_MAX_DEVS);
 }
diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h
index 9d865794a420..25bfcb071c1f 100644
--- a/include/uapi/linux/cxl_mem.h
+++ b/include/uapi/linux/cxl_mem.h
@@ -33,6 +33,7 @@  extern "C" {
 #define CXL_CMDS                                                          \
 	___C(INVALID, "Invalid Command"),                                 \
 	___C(IDENTIFY, "Identify Command"),                               \
+	___C(RAW, "Raw device command"),                                  \
 	___C(MAX, "Last command")
 
 #define ___C(a, b) CXL_MEM_COMMAND_ID_##a
@@ -124,6 +125,9 @@  struct cxl_mem_query_commands {
  * @id: The command to send to the memory device. This must be one of the
  *	commands returned by the query command.
  * @flags: Flags for the command (input).
+ * @raw: Special fields for raw commands
+ * @raw.opcode: Opcode passed to hardware when using the RAW command.
+ * @raw.rsvd: Must be zero.
  * @rsvd: Must be zero.
  * @retval: Return value from the memory device (output).
  * @size_in: Size of the payload to provide to the device (input).
@@ -143,7 +147,13 @@  struct cxl_mem_query_commands {
 struct cxl_send_command {
 	__u32 id;
 	__u32 flags;
-	__u32 rsvd;
+	union {
+		struct {
+			__u16 opcode;
+			__u16 rsvd;
+		} raw;
+		__u32 rsvd;
+	};
 	__u32 retval;
 
 	struct {