diff mbox series

[v4,2/6] ACPI: Move IOMMU setup code out of IORT

Message ID 20210610075130.67517-3-jean-philippe@linaro.org (mailing list archive)
State New
Headers show
Series Add support for ACPI VIOT | expand

Commit Message

Jean-Philippe Brucker June 10, 2021, 7:51 a.m. UTC
Extract the code that sets up the IOMMU infrastructure from IORT, since
it can be reused by VIOT. Move it one level up into a new
acpi_iommu_configure_id() function, which calls the IORT parsing
function which in turn calls the acpi_iommu_fwspec_init() helper.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
 include/acpi/acpi_bus.h   |  3 ++
 include/linux/acpi_iort.h |  8 ++---
 drivers/acpi/arm64/iort.c | 75 +++++----------------------------------
 drivers/acpi/scan.c       | 73 ++++++++++++++++++++++++++++++++++++-
 4 files changed, 87 insertions(+), 72 deletions(-)

Comments

Eric Auger June 16, 2021, 9:35 a.m. UTC | #1
Hi jean,
On 6/10/21 9:51 AM, Jean-Philippe Brucker wrote:
> Extract the code that sets up the IOMMU infrastructure from IORT, since
> it can be reused by VIOT. Move it one level up into a new
> acpi_iommu_configure_id() function, which calls the IORT parsing
> function which in turn calls the acpi_iommu_fwspec_init() helper.
>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
> ---
>  include/acpi/acpi_bus.h   |  3 ++
>  include/linux/acpi_iort.h |  8 ++---
>  drivers/acpi/arm64/iort.c | 75 +++++----------------------------------
>  drivers/acpi/scan.c       | 73 ++++++++++++++++++++++++++++++++++++-
>  4 files changed, 87 insertions(+), 72 deletions(-)
>
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 3a82faac5767..41f092a269f6 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -588,6 +588,9 @@ struct acpi_pci_root {
>  
>  bool acpi_dma_supported(struct acpi_device *adev);
>  enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
> +int acpi_iommu_fwspec_init(struct device *dev, u32 id,
> +			   struct fwnode_handle *fwnode,
> +			   const struct iommu_ops *ops);
>  int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>  		       u64 *size);
>  int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
> index f7f054833afd..f1f0842a2cb2 100644
> --- a/include/linux/acpi_iort.h
> +++ b/include/linux/acpi_iort.h
> @@ -35,8 +35,7 @@ void acpi_configure_pmsi_domain(struct device *dev);
>  int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id);
>  /* IOMMU interface */
>  int iort_dma_get_ranges(struct device *dev, u64 *size);
> -const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
> -						const u32 *id_in);
> +int iort_iommu_configure_id(struct device *dev, const u32 *id_in);
>  int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head);
>  phys_addr_t acpi_iort_dma_get_max_cpu_address(void);
>  #else
> @@ -50,9 +49,8 @@ static inline void acpi_configure_pmsi_domain(struct device *dev) { }
>  /* IOMMU interface */
>  static inline int iort_dma_get_ranges(struct device *dev, u64 *size)
>  { return -ENODEV; }
> -static inline const struct iommu_ops *iort_iommu_configure_id(
> -				      struct device *dev, const u32 *id_in)
> -{ return NULL; }
> +static inline int iort_iommu_configure_id(struct device *dev, const u32 *id_in)
> +{ return -ENODEV; }
>  static inline
>  int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
>  { return 0; }
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index a940be1cf2af..b5b021e064b6 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -806,23 +806,6 @@ static struct acpi_iort_node *iort_get_msi_resv_iommu(struct device *dev)
>  	return NULL;
>  }
>  
> -static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev)
> -{
> -	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> -
> -	return (fwspec && fwspec->ops) ? fwspec->ops : NULL;
> -}
> -
> -static inline int iort_add_device_replay(struct device *dev)
> -{
> -	int err = 0;
> -
> -	if (dev->bus && !device_iommu_mapped(dev))
> -		err = iommu_probe_device(dev);
> -
> -	return err;
> -}
> -
>  /**
>   * iort_iommu_msi_get_resv_regions - Reserved region driver helper
>   * @dev: Device from iommu_get_resv_regions()
> @@ -900,18 +883,6 @@ static inline bool iort_iommu_driver_enabled(u8 type)
>  	}
>  }
>  
> -static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
> -			       struct fwnode_handle *fwnode,
> -			       const struct iommu_ops *ops)
> -{
> -	int ret = iommu_fwspec_init(dev, fwnode, ops);
> -
> -	if (!ret)
> -		ret = iommu_fwspec_add_ids(dev, &streamid, 1);
> -
> -	return ret;
> -}
> -
>  static bool iort_pci_rc_supports_ats(struct acpi_iort_node *node)
>  {
>  	struct acpi_iort_root_complex *pci_rc;
> @@ -946,7 +917,7 @@ static int iort_iommu_xlate(struct device *dev, struct acpi_iort_node *node,
>  		return iort_iommu_driver_enabled(node->type) ?
>  		       -EPROBE_DEFER : -ENODEV;
>  
> -	return arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
> +	return acpi_iommu_fwspec_init(dev, streamid, iort_fwnode, ops);
>  }
>  
>  struct iort_pci_alias_info {
> @@ -1020,24 +991,14 @@ static int iort_nc_iommu_map_id(struct device *dev,
>   * @dev: device to configure
>   * @id_in: optional input id const value pointer
>   *
> - * Returns: iommu_ops pointer on configuration success
> - *          NULL on configuration failure
> + * Returns: 0 on success, <0 on failure
>   */
> -const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
> -						const u32 *id_in)
> +int iort_iommu_configure_id(struct device *dev, const u32 *id_in)
>  {
>  	struct acpi_iort_node *node;
> -	const struct iommu_ops *ops;
> +	const struct iommu_ops *ops = NULL;
>  	int err = -ENODEV;
>  
> -	/*
> -	 * If we already translated the fwspec there
> -	 * is nothing left to do, return the iommu_ops.
> -	 */
> -	ops = iort_fwspec_iommu_ops(dev);
> -	if (ops)
> -		return ops;
> -
>  	if (dev_is_pci(dev)) {
>  		struct iommu_fwspec *fwspec;
>  		struct pci_bus *bus = to_pci_dev(dev)->bus;
> @@ -1046,7 +1007,7 @@ const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
>  		node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
>  				      iort_match_node_callback, &bus->dev);
>  		if (!node)
> -			return NULL;
> +			return -ENODEV;
>  
>  		info.node = node;
>  		err = pci_for_each_dma_alias(to_pci_dev(dev),
> @@ -1059,7 +1020,7 @@ const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
>  		node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
>  				      iort_match_node_callback, dev);
>  		if (!node)
> -			return NULL;
> +			return -ENODEV;
>  
>  		err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) :
>  			      iort_nc_iommu_map(dev, node);
> @@ -1068,32 +1029,14 @@ const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
>  			iort_named_component_init(dev, node);
>  	}
>  
> -	/*
> -	 * If we have reason to believe the IOMMU driver missed the initial
> -	 * add_device callback for dev, replay it to get things in order.
> -	 */
> -	if (!err) {
> -		ops = iort_fwspec_iommu_ops(dev);
> -		err = iort_add_device_replay(dev);
> -	}
> -
> -	/* Ignore all other errors apart from EPROBE_DEFER */
> -	if (err == -EPROBE_DEFER) {
> -		ops = ERR_PTR(err);
> -	} else if (err) {
> -		dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
> -		ops = NULL;
> -	}
> -
> -	return ops;
> +	return err;
>  }
>  
>  #else
>  int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
>  { return 0; }
> -const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
> -						const u32 *input_id)
> -{ return NULL; }
> +int iort_iommu_configure_id(struct device *dev, const u32 *input_id)
> +{ return -ENODEV; }
>  #endif
>  
>  static int nc_dma_get_range(struct device *dev, u64 *size)
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index ea613df8f913..0c53c8533300 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -9,6 +9,7 @@
>  #include <linux/kernel.h>
>  #include <linux/acpi.h>
>  #include <linux/acpi_iort.h>
> +#include <linux/iommu.h>
>  #include <linux/signal.h>
>  #include <linux/kthread.h>
>  #include <linux/dmi.h>
> @@ -1520,6 +1521,76 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>  	return ret >= 0 ? 0 : ret;
>  }
>  
> +#ifdef CONFIG_IOMMU_API
> +int acpi_iommu_fwspec_init(struct device *dev, u32 id,
> +			   struct fwnode_handle *fwnode,
> +			   const struct iommu_ops *ops)
> +{
> +	int ret = iommu_fwspec_init(dev, fwnode, ops);
> +
> +	if (!ret)
> +		ret = iommu_fwspec_add_ids(dev, &id, 1);
> +
> +	return ret;
> +}
> +
> +static inline const struct iommu_ops *acpi_iommu_fwspec_ops(struct device *dev)
> +{
> +	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +
> +	return fwspec ? fwspec->ops : NULL;
> +}
> +
> +static const struct iommu_ops *acpi_iommu_configure_id(struct device *dev,
> +						       const u32 *id_in)
> +{
> +	int err;
> +	const struct iommu_ops *ops;
> +
> +	/*
> +	 * If we already translated the fwspec there is nothing left to do,
> +	 * return the iommu_ops.
> +	 */
> +	ops = acpi_iommu_fwspec_ops(dev);
> +	if (ops)
> +		return ops;
> +
> +	err = iort_iommu_configure_id(dev, id_in);
> +
> +	/*
> +	 * If we have reason to believe the IOMMU driver missed the initial
> +	 * add_device callback for dev, replay it to get things in order.
> +	 */
> +	if (!err && dev->bus && !device_iommu_mapped(dev))
> +		err = iommu_probe_device(dev);
Previously we had:
    if (!err) {
        ops = iort_fwspec_iommu_ops(dev);
        err = iort_add_device_replay(dev);
    }

Please can you explain the transform? I see the

acpi_iommu_fwspec_ops call below but is it not straightforward to me.
Also the comment mentions replay. Unsure if it is still OK.

> +
> +	/* Ignore all other errors apart from EPROBE_DEFER */
> +	if (err == -EPROBE_DEFER) {
> +		return ERR_PTR(err);
> +	} else if (err) {
> +		dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
> +		return NULL;
> +	}
> +	return acpi_iommu_fwspec_ops(dev);
> +}
> +
> +#else /* !CONFIG_IOMMU_API */
> +
> +int acpi_iommu_fwspec_init(struct device *dev, u32 id,
> +			   struct fwnode_handle *fwnode,
> +			   const struct iommu_ops *ops)
> +{
> +	return -ENODEV;
> +}
> +
> +static const struct iommu_ops *acpi_iommu_configure_id(struct device *dev,
> +						       const u32 *id_in)
> +{
> +	return NULL;
> +}
> +
> +#endif /* !CONFIG_IOMMU_API */
> +
>  /**
>   * acpi_dma_configure_id - Set-up DMA configuration for the device.
>   * @dev: The pointer to the device
> @@ -1539,7 +1610,7 @@ int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
>  
>  	acpi_arch_dma_setup(dev, &dma_addr, &size);
>  
> -	iommu = iort_iommu_configure_id(dev, input_id);
> +	iommu = acpi_iommu_configure_id(dev, input_id);
>  	if (PTR_ERR(iommu) == -EPROBE_DEFER)
>  		return -EPROBE_DEFER;
>  
Thanks

Eric
diff mbox series

Patch

diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 3a82faac5767..41f092a269f6 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -588,6 +588,9 @@  struct acpi_pci_root {
 
 bool acpi_dma_supported(struct acpi_device *adev);
 enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
+int acpi_iommu_fwspec_init(struct device *dev, u32 id,
+			   struct fwnode_handle *fwnode,
+			   const struct iommu_ops *ops);
 int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
 		       u64 *size);
 int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index f7f054833afd..f1f0842a2cb2 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -35,8 +35,7 @@  void acpi_configure_pmsi_domain(struct device *dev);
 int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id);
 /* IOMMU interface */
 int iort_dma_get_ranges(struct device *dev, u64 *size);
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
-						const u32 *id_in);
+int iort_iommu_configure_id(struct device *dev, const u32 *id_in);
 int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head);
 phys_addr_t acpi_iort_dma_get_max_cpu_address(void);
 #else
@@ -50,9 +49,8 @@  static inline void acpi_configure_pmsi_domain(struct device *dev) { }
 /* IOMMU interface */
 static inline int iort_dma_get_ranges(struct device *dev, u64 *size)
 { return -ENODEV; }
-static inline const struct iommu_ops *iort_iommu_configure_id(
-				      struct device *dev, const u32 *id_in)
-{ return NULL; }
+static inline int iort_iommu_configure_id(struct device *dev, const u32 *id_in)
+{ return -ENODEV; }
 static inline
 int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
 { return 0; }
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index a940be1cf2af..b5b021e064b6 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -806,23 +806,6 @@  static struct acpi_iort_node *iort_get_msi_resv_iommu(struct device *dev)
 	return NULL;
 }
 
-static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev)
-{
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
-	return (fwspec && fwspec->ops) ? fwspec->ops : NULL;
-}
-
-static inline int iort_add_device_replay(struct device *dev)
-{
-	int err = 0;
-
-	if (dev->bus && !device_iommu_mapped(dev))
-		err = iommu_probe_device(dev);
-
-	return err;
-}
-
 /**
  * iort_iommu_msi_get_resv_regions - Reserved region driver helper
  * @dev: Device from iommu_get_resv_regions()
@@ -900,18 +883,6 @@  static inline bool iort_iommu_driver_enabled(u8 type)
 	}
 }
 
-static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
-			       struct fwnode_handle *fwnode,
-			       const struct iommu_ops *ops)
-{
-	int ret = iommu_fwspec_init(dev, fwnode, ops);
-
-	if (!ret)
-		ret = iommu_fwspec_add_ids(dev, &streamid, 1);
-
-	return ret;
-}
-
 static bool iort_pci_rc_supports_ats(struct acpi_iort_node *node)
 {
 	struct acpi_iort_root_complex *pci_rc;
@@ -946,7 +917,7 @@  static int iort_iommu_xlate(struct device *dev, struct acpi_iort_node *node,
 		return iort_iommu_driver_enabled(node->type) ?
 		       -EPROBE_DEFER : -ENODEV;
 
-	return arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
+	return acpi_iommu_fwspec_init(dev, streamid, iort_fwnode, ops);
 }
 
 struct iort_pci_alias_info {
@@ -1020,24 +991,14 @@  static int iort_nc_iommu_map_id(struct device *dev,
  * @dev: device to configure
  * @id_in: optional input id const value pointer
  *
- * Returns: iommu_ops pointer on configuration success
- *          NULL on configuration failure
+ * Returns: 0 on success, <0 on failure
  */
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
-						const u32 *id_in)
+int iort_iommu_configure_id(struct device *dev, const u32 *id_in)
 {
 	struct acpi_iort_node *node;
-	const struct iommu_ops *ops;
+	const struct iommu_ops *ops = NULL;
 	int err = -ENODEV;
 
-	/*
-	 * If we already translated the fwspec there
-	 * is nothing left to do, return the iommu_ops.
-	 */
-	ops = iort_fwspec_iommu_ops(dev);
-	if (ops)
-		return ops;
-
 	if (dev_is_pci(dev)) {
 		struct iommu_fwspec *fwspec;
 		struct pci_bus *bus = to_pci_dev(dev)->bus;
@@ -1046,7 +1007,7 @@  const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
 		node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
 				      iort_match_node_callback, &bus->dev);
 		if (!node)
-			return NULL;
+			return -ENODEV;
 
 		info.node = node;
 		err = pci_for_each_dma_alias(to_pci_dev(dev),
@@ -1059,7 +1020,7 @@  const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
 		node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
 				      iort_match_node_callback, dev);
 		if (!node)
-			return NULL;
+			return -ENODEV;
 
 		err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) :
 			      iort_nc_iommu_map(dev, node);
@@ -1068,32 +1029,14 @@  const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
 			iort_named_component_init(dev, node);
 	}
 
-	/*
-	 * If we have reason to believe the IOMMU driver missed the initial
-	 * add_device callback for dev, replay it to get things in order.
-	 */
-	if (!err) {
-		ops = iort_fwspec_iommu_ops(dev);
-		err = iort_add_device_replay(dev);
-	}
-
-	/* Ignore all other errors apart from EPROBE_DEFER */
-	if (err == -EPROBE_DEFER) {
-		ops = ERR_PTR(err);
-	} else if (err) {
-		dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
-		ops = NULL;
-	}
-
-	return ops;
+	return err;
 }
 
 #else
 int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
 { return 0; }
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
-						const u32 *input_id)
-{ return NULL; }
+int iort_iommu_configure_id(struct device *dev, const u32 *input_id)
+{ return -ENODEV; }
 #endif
 
 static int nc_dma_get_range(struct device *dev, u64 *size)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index ea613df8f913..0c53c8533300 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -9,6 +9,7 @@ 
 #include <linux/kernel.h>
 #include <linux/acpi.h>
 #include <linux/acpi_iort.h>
+#include <linux/iommu.h>
 #include <linux/signal.h>
 #include <linux/kthread.h>
 #include <linux/dmi.h>
@@ -1520,6 +1521,76 @@  int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
 	return ret >= 0 ? 0 : ret;
 }
 
+#ifdef CONFIG_IOMMU_API
+int acpi_iommu_fwspec_init(struct device *dev, u32 id,
+			   struct fwnode_handle *fwnode,
+			   const struct iommu_ops *ops)
+{
+	int ret = iommu_fwspec_init(dev, fwnode, ops);
+
+	if (!ret)
+		ret = iommu_fwspec_add_ids(dev, &id, 1);
+
+	return ret;
+}
+
+static inline const struct iommu_ops *acpi_iommu_fwspec_ops(struct device *dev)
+{
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+
+	return fwspec ? fwspec->ops : NULL;
+}
+
+static const struct iommu_ops *acpi_iommu_configure_id(struct device *dev,
+						       const u32 *id_in)
+{
+	int err;
+	const struct iommu_ops *ops;
+
+	/*
+	 * If we already translated the fwspec there is nothing left to do,
+	 * return the iommu_ops.
+	 */
+	ops = acpi_iommu_fwspec_ops(dev);
+	if (ops)
+		return ops;
+
+	err = iort_iommu_configure_id(dev, id_in);
+
+	/*
+	 * If we have reason to believe the IOMMU driver missed the initial
+	 * add_device callback for dev, replay it to get things in order.
+	 */
+	if (!err && dev->bus && !device_iommu_mapped(dev))
+		err = iommu_probe_device(dev);
+
+	/* Ignore all other errors apart from EPROBE_DEFER */
+	if (err == -EPROBE_DEFER) {
+		return ERR_PTR(err);
+	} else if (err) {
+		dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
+		return NULL;
+	}
+	return acpi_iommu_fwspec_ops(dev);
+}
+
+#else /* !CONFIG_IOMMU_API */
+
+int acpi_iommu_fwspec_init(struct device *dev, u32 id,
+			   struct fwnode_handle *fwnode,
+			   const struct iommu_ops *ops)
+{
+	return -ENODEV;
+}
+
+static const struct iommu_ops *acpi_iommu_configure_id(struct device *dev,
+						       const u32 *id_in)
+{
+	return NULL;
+}
+
+#endif /* !CONFIG_IOMMU_API */
+
 /**
  * acpi_dma_configure_id - Set-up DMA configuration for the device.
  * @dev: The pointer to the device
@@ -1539,7 +1610,7 @@  int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
 
 	acpi_arch_dma_setup(dev, &dma_addr, &size);
 
-	iommu = iort_iommu_configure_id(dev, input_id);
+	iommu = acpi_iommu_configure_id(dev, input_id);
 	if (PTR_ERR(iommu) == -EPROBE_DEFER)
 		return -EPROBE_DEFER;