From patchwork Mon Apr 18 14:14:16 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Asmaa Mnebhi X-Patchwork-Id: 12816726 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 07C8AC433F5 for ; Mon, 18 Apr 2022 15:21:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229765AbiDRPYc (ORCPT ); Mon, 18 Apr 2022 11:24:32 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34082 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345500AbiDRPWj (ORCPT ); Mon, 18 Apr 2022 11:22:39 -0400 X-Greylist: delayed 401 seconds by postgrey-1.37 at lindbergh.monkeyblade.net; Mon, 18 Apr 2022 07:21:08 PDT Received: from mellanox.co.il (mail-il-dmz.mellanox.com [193.47.165.129]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 85E9F13F43 for ; Mon, 18 Apr 2022 07:21:08 -0700 (PDT) Received: from Internal Mail-Server by MTLPINE1 (envelope-from asmaa@mellanox.com) with SMTP; 18 Apr 2022 17:14:22 +0300 Received: from farm-0002.mtbu.labs.mlnx (farm-0002.mtbu.labs.mlnx [10.15.2.32]) by mtbu-labmailer.labs.mlnx (8.14.4/8.14.4) with ESMTP id 23IEELlF026599; Mon, 18 Apr 2022 10:14:21 -0400 Received: (from asmaa@localhost) by farm-0002.mtbu.labs.mlnx (8.14.7/8.13.8/Submit) id 23IEEK63027577; Mon, 18 Apr 2022 10:14:20 -0400 From: Asmaa Mnebhi To: andy.shevchenko@gmail.com, linus.walleij@linaro.org, bgolaszewski@baylibre.com, linux-gpio@vger.kernel.org, linux-acpi@vger.kernel.org Cc: Asmaa Mnebhi Subject: [PATCH v1 1/1] Add driver for Mellanox BlueField-3 GPIO controller Date: Mon, 18 Apr 2022 10:14:16 -0400 Message-Id: <20220418141416.27529-1-asmaa@nvidia.com> X-Mailer: git-send-email 2.30.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-acpi@vger.kernel.org This patch adds support for the GPIO controller used by Mellanox BlueField-3 SOCs. By default (after a reset for example), only the hardware has control over the GPIO values. The GPIOs need to be configured accordingly for the software to control them. We don't allow the user to manipulate the GPIO pins unless it is allowed by the ACPI table property "ctrl_gpio_mask". Signed-off-by: Asmaa Mnebhi Signed-off-by: Asmaa Mnebhi --- drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-mlxbf3.c | 337 +++++++++++++++++++++++++++++++++++++ 3 files changed, 345 insertions(+) create mode 100644 drivers/gpio/gpio-mlxbf3.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 45764ec3b2eb..d470117e7254 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1530,6 +1530,13 @@ config GPIO_MLXBF2 help Say Y here if you want GPIO support on Mellanox BlueField 2 SoC. +config GPIO_MLXBF3 + tristate "Mellanox BlueField 3 SoC GPIO" + depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST) + select GPIO_GENERIC + help + Say Y here if you want GPIO support on Mellanox BlueField 3 SoC. + config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" depends on X86 || COMPILE_TEST diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 14352f6dfe8e..eb24e8e4c4e1 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -97,6 +97,7 @@ obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o obj-$(CONFIG_GPIO_MLXBF2) += gpio-mlxbf2.o +obj-$(CONFIG_GPIO_MLXBF3) += gpio-mlxbf3.o obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c new file mode 100644 index 000000000000..1f576de43680 --- /dev/null +++ b/drivers/gpio/gpio-mlxbf3.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause + +/* + * Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * There are 2 YU GPIO blocks: + * gpio[0]: HOST_GPIO0->HOST_GPIO31 + * gpio[1]: HOST_GPIO32->HOST_GPIO55 + */ +#define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32 + +/* + * fw_gpio[x] block registers and their offset + */ +#define YU_GPIO_FW_CONTROL_SET 0x00 +#define YU_GPIO_FW_OUTPUT_ENABLE_SET 0x04 +#define YU_GPIO_FW_DATA_OUT_SET 0x08 +#define YU_GPIO_FW_CONTROL_CLEAR 0x14 +#define YU_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x18 +#define YU_GPIO_FW_DATA_OUT_CLEAR 0x1c +#define YU_GPIO_CAUSE_RISE_EN 0x28 +#define YU_GPIO_CAUSE_FALL_EN 0x2c +#define YU_GPIO_READ_DATA_IN 0x30 +#define YU_GPIO_READ_OUTPUT_ENABLE 0x34 +#define YU_GPIO_READ_DATA_OUT 0x38 +#define YU_GPIO_READ_FW_CONTROL 0x44 + +#define YU_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x00 +#define YU_GPIO_CAUSE_OR_EVTEN0 0x14 +#define YU_GPIO_CAUSE_OR_CLRCAUSE 0x18 + +/* BlueField-3 gpio block context structure. */ +struct mlxbf3_gpio_context { + struct gpio_chip gc; + struct irq_chip irq_chip; + + /* YU GPIO blocks address */ + void __iomem *gpio_io; + + /* YU GPIO cause block address */ + void __iomem *gpio_cause_io; + + /* Represents GPIO pins that the user can manipulate */ + uint32_t ctrl_gpio_mask; +}; + +static void mlxbf3_gpio_set(struct gpio_chip *chip, unsigned int offset, int val) +{ + struct mlxbf3_gpio_context *gs = gpiochip_get_data(chip); + + /* Software can only control GPIO pins defined by ctrl_gpio_mask */ + if (!(BIT(offset) & gs->ctrl_gpio_mask)) + return; + + if (val) + writel(BIT(offset), gs->gpio_io + YU_GPIO_FW_DATA_OUT_SET); + else + writel(BIT(offset), gs->gpio_io + YU_GPIO_FW_DATA_OUT_CLEAR); + + /* Make sure all previous writes are done before changing YU_GPIO_FW_CONTROL_SET */ + wmb(); + + /* This needs to be done last to avoid glitches */ + writel(BIT(offset), gs->gpio_io + YU_GPIO_FW_CONTROL_SET); +} + +static int mlxbf3_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct mlxbf3_gpio_context *gs = gpiochip_get_data(chip); + unsigned long flags; + + spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + + writel(BIT(offset), gs->gpio_io + YU_GPIO_FW_OUTPUT_ENABLE_CLEAR); + writel(BIT(offset), gs->gpio_io + YU_GPIO_FW_CONTROL_CLEAR); + + spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + + return 0; +} + +static int mlxbf3_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, + int value) +{ + struct mlxbf3_gpio_context *gs = gpiochip_get_data(chip); + unsigned long flags; + + spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + + writel(BIT(offset), gs->gpio_io + YU_GPIO_FW_OUTPUT_ENABLE_SET); + + spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + + return 0; +} + +static void mlxbf3_gpio_irq_enable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + int offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + val = readl(gs->gpio_cause_io + YU_GPIO_CAUSE_OR_CLRCAUSE); + val |= BIT(offset); + writel(val, gs->gpio_cause_io + YU_GPIO_CAUSE_OR_CLRCAUSE); + + val = readl(gs->gpio_cause_io + YU_GPIO_CAUSE_OR_EVTEN0); + val |= BIT(offset); + writel(val, gs->gpio_cause_io + YU_GPIO_CAUSE_OR_EVTEN0); + spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); +} + +static void mlxbf3_gpio_irq_disable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + int offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + val = readl(gs->gpio_cause_io + YU_GPIO_CAUSE_OR_EVTEN0); + val &= ~BIT(offset); + writel(val, gs->gpio_cause_io + YU_GPIO_CAUSE_OR_EVTEN0); + spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); +} + +static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr) +{ + struct mlxbf3_gpio_context *gs = ptr; + struct gpio_chip *gc = &gs->gc; + unsigned long pending; + u32 level; + + pending = readl(gs->gpio_cause_io + YU_GPIO_CAUSE_OR_CAUSE_EVTEN0); + writel(pending, gs->gpio_cause_io + YU_GPIO_CAUSE_OR_CLRCAUSE); + + for_each_set_bit(level, &pending, gc->ngpio) { + int gpio_irq = irq_find_mapping(gc->irq.domain, level); + + generic_handle_irq(gpio_irq); + } + + return IRQ_RETVAL(pending); +} + +static int +mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + int offset = irqd_to_hwirq(irqd); + unsigned long flags; + bool fall = false; + bool rise = false; + u32 val; + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_BOTH: + fall = true; + rise = true; + break; + case IRQ_TYPE_EDGE_RISING: + rise = true; + break; + case IRQ_TYPE_EDGE_FALLING: + fall = true; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + if (fall) { + val = readl(gs->gpio_io + YU_GPIO_CAUSE_FALL_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + YU_GPIO_CAUSE_FALL_EN); + } + + if (rise) { + val = readl(gs->gpio_io + YU_GPIO_CAUSE_RISE_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + YU_GPIO_CAUSE_RISE_EN); + } + spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + + return 0; +} + +/* BlueField-3 GPIO driver initialization routine. */ +static int +mlxbf3_gpio_probe(struct platform_device *pdev) +{ + struct mlxbf3_gpio_context *gs; + struct device *dev = &pdev->dev; + struct gpio_irq_chip *girq; + struct gpio_chip *gc; + unsigned int npins; + const char *name; + int ret, irq; + + name = dev_name(dev); + + gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); + if (!gs) + return -ENOMEM; + + /* YU GPIO block address */ + gs->gpio_io = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(gs->gpio_io)) + return PTR_ERR(gs->gpio_io); + + /* YU GPIO block address */ + gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(gs->gpio_cause_io)) + return PTR_ERR(gs->gpio_cause_io); + + if (device_property_read_u32(dev, "npins", &npins)) + npins = MLXBF3_GPIO_MAX_PINS_PER_BLOCK; + + if (device_property_read_u32(dev, "ctrl_gpio_mask", &gs->ctrl_gpio_mask)) + gs->ctrl_gpio_mask = 0x0; + + gc = &gs->gc; + + /* To set the direction to input, just give control to HW by setting + * YU_GPIO_FW_CONTROL_CLEAR. + * If the GPIO is controlled by HW, read its value via read_data_in register. + * + * When the direction = output, the GPIO is controlled by SW and + * datain=dataout. If software modifies the value of the GPIO pin, + * the value can be read from read_data_in without changing the direction. + */ + ret = bgpio_init(gc, dev, 4, + gs->gpio_io + YU_GPIO_READ_DATA_IN, + NULL, + NULL, + NULL, + NULL, + 0); + + gc->set = mlxbf3_gpio_set; + gc->direction_input = mlxbf3_gpio_direction_input; + gc->direction_output = mlxbf3_gpio_direction_output; + + gc->ngpio = npins; + gc->owner = THIS_MODULE; + + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + gs->irq_chip.name = name; + gs->irq_chip.irq_set_type = mlxbf3_gpio_irq_set_type; + gs->irq_chip.irq_enable = mlxbf3_gpio_irq_enable; + gs->irq_chip.irq_disable = mlxbf3_gpio_irq_disable; + + girq = &gs->gc.irq; + girq->chip = &gs->irq_chip; + girq->handler = handle_simple_irq; + girq->default_type = IRQ_TYPE_NONE; + /* This will let us handle the parent IRQ in the driver */ + girq->num_parents = 0; + girq->parents = NULL; + girq->parent_handler = NULL; + + /* + * Directly request the irq here instead of passing + * a flow-handler because the irq is shared. + */ + ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, + IRQF_SHARED, name, gs); + if (ret) { + dev_err(dev, "failed to request IRQ"); + return ret; + } + } + + platform_set_drvdata(pdev, gs); + + ret = devm_gpiochip_add_data(dev, &gs->gc, gs); + if (ret) { + dev_err(dev, "Failed adding memory mapped gpiochip\n"); + return ret; + } + + return 0; +} + +static int mlxbf3_gpio_remove(struct platform_device *pdev) +{ + struct mlxbf3_gpio_context *gs = platform_get_drvdata(pdev); + + /* Set the GPIO control back to HW */ + writel(gs->ctrl_gpio_mask, gs->gpio_io + YU_GPIO_FW_CONTROL_CLEAR); + + return 0; +} + +static const struct acpi_device_id __maybe_unused mlxbf3_gpio_acpi_match[] = { + { "MLNXBF33", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match); + +static struct platform_driver mlxbf3_gpio_driver = { + .driver = { + .name = "mlxbf3_gpio", + .acpi_match_table = mlxbf3_gpio_acpi_match, + }, + .probe = mlxbf3_gpio_probe, + .remove = mlxbf3_gpio_remove, +}; + +module_platform_driver(mlxbf3_gpio_driver); + +MODULE_DESCRIPTION("Mellanox BlueField-3 GPIO Driver"); +MODULE_AUTHOR("Asmaa Mnebhi "); +MODULE_LICENSE("Dual BSD/GPL");