@@ -512,6 +512,15 @@ config PINCTRL_ZYNQMP
This driver can also be built as a module. If so, the module
will be called pinctrl-zynqmp.
+config PINCTRL_MLXBF
+ tristate "NVIDIA BlueField-3 SoC Pinctrl driver"
+ depends on (MELLANOX_PLATFORM && ARM64 && ACPI)
+ select PINMUX
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ help
+ This selects the pinctrl driver for BlueField-3 SoCs.
+
source "drivers/pinctrl/actions/Kconfig"
source "drivers/pinctrl/aspeed/Kconfig"
source "drivers/pinctrl/bcm/Kconfig"
@@ -35,6 +35,7 @@ obj-$(CONFIG_PINCTRL_MCP23S08_I2C) += pinctrl-mcp23s08_i2c.o
obj-$(CONFIG_PINCTRL_MCP23S08_SPI) += pinctrl-mcp23s08_spi.o
obj-$(CONFIG_PINCTRL_MCP23S08) += pinctrl-mcp23s08.o
obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o
+obj-$(CONFIG_PINCTRL_MLXBF) += pinctrl-mlxbf.o
obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o
obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
new file mode 100644
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause
+
+/*
+ * Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES
+ */
+
+#include <linux/acpi.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "core.h"
+
+#define MLXBF_GPIO0_FW_CONTROL_SET 0
+#define MLXBF_GPIO0_FW_CONTROL_CLEAR 0x14
+#define MLXBF_GPIO1_FW_CONTROL_SET 0x80
+#define MLXBF_GPIO1_FW_CONTROL_CLEAR 0x94
+
+#define MLXBF_NGPIOS_GPIO0 32
+
+enum {
+ MLXBF_GPIO_HW_MODE,
+ MLXBF_GPIO_SW_MODE
+};
+
+struct mlxbf_pinctrl {
+ void __iomem *base;
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+ struct pinctrl_gpio_range gpio_range;
+};
+
+#define MLXBF_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \
+ { \
+ .name = "mlxbf_gpio_range", \
+ .id = _id, \
+ .base = _gpiobase, \
+ .pin_base = _pinbase, \
+ .npins = _npins, \
+ }
+
+static struct pinctrl_gpio_range mlxbf_pinctrl_gpio_ranges[] = {
+ MLXBF_GPIO_RANGE(0, 0, 480, 32),
+ MLXBF_GPIO_RANGE(1, 32, 456, 24),
+};
+
+static const struct pinctrl_pin_desc mlxbf_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+ PINCTRL_PIN(48, "gpio48"),
+ PINCTRL_PIN(49, "gpio49"),
+ PINCTRL_PIN(50, "gpio50"),
+ PINCTRL_PIN(51, "gpio51"),
+ PINCTRL_PIN(52, "gpio52"),
+ PINCTRL_PIN(53, "gpio53"),
+ PINCTRL_PIN(54, "gpio54"),
+ PINCTRL_PIN(55, "gpio55"),
+};
+
+/*
+ * All single-pin functions can be mapped to any GPIO, however pinmux applies
+ * functions to pin groups and only those groups declared as supporting that
+ * function. To make this work we must put each pin in its own dummy group so
+ * that the functions can be described as applying to all pins.
+ * We use the same name as in the datasheet.
+ */
+static const char * const mlxbf_pinctrl_single_group_names[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6",
+ "gpio7", "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13",
+ "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20",
+ "gpio21", "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27",
+ "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34",
+ "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41",
+ "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48",
+ "gpio49", "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55"
+};
+
+/* Set of pin numbers for single-pin groups */
+static const unsigned int mlxbf_pinctrl_single_group_pins[] = {
+ 0, 1, 2, 3, 4, 5, 6,
+ 7, 8, 9, 10, 11, 12, 13,
+ 14, 15, 16, 17, 18, 19, 20,
+ 21, 22, 23, 24, 25, 26, 27,
+ 28, 29, 30, 31, 32, 33, 34,
+ 35, 36, 37, 38, 39, 40, 41,
+ 42, 43, 44, 45, 46, 47, 48,
+ 49, 50, 51, 52, 53, 54, 55,
+};
+
+static int mlxbf_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ /* Number single-pin groups */
+ return ARRAY_SIZE(mlxbf_pinctrl_single_group_pins);
+}
+
+static const char *mlxbf_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return mlxbf_pinctrl_single_group_names[selector];
+}
+
+static int mlxbf_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const unsigned int **pins,
+ unsigned int *num_pins)
+{
+ /* return the dummy group for a single pin */
+ *pins = &mlxbf_pinctrl_single_group_pins[selector];
+ *num_pins = 1;
+
+ return 0;
+}
+
+static const struct pinctrl_ops mlxbf_pinctrl_group_ops = {
+ .get_groups_count = mlxbf_get_groups_count,
+ .get_group_name = mlxbf_get_group_name,
+ .get_group_pins = mlxbf_get_group_pins,
+};
+
+static const char * const mlxbf_gpiofunc_group_names[] = { "swctrl" };
+static const char * const mlxbf_hwfunc_group_names[] = { "hwctrl" };
+
+/*
+ * Only 2 functions are supported which apply to all pins:
+ * 1) Possible default hardware functionality
+ * 2) Software controlled GPIO
+ */
+static const struct {
+ const char *name;
+ const char * const *group_names;
+} mlxbf_pmx_funcs[] = {
+ {
+ .name = "hwfunc",
+ .group_names = mlxbf_hwfunc_group_names
+ },
+ {
+ .name = "gpiofunc",
+ .group_names = mlxbf_gpiofunc_group_names
+ },
+};
+
+static int mlxbf_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(mlxbf_pmx_funcs);
+}
+
+static const char *mlxbf_pmx_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return mlxbf_pmx_funcs[selector].name;
+}
+
+static int mlxbf_pmx_get_groups(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const char * const **groups,
+ unsigned int * const num_groups)
+{
+ *groups = mlxbf_pmx_funcs[selector].group_names;
+ /* The function where "software has control over a GPIO" is available to all gpio pins */
+ *num_groups = ARRAY_SIZE(mlxbf_pinctrl_single_group_pins);
+
+ return 0;
+}
+
+static int mlxbf_pmx_set(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ unsigned int group)
+{
+ struct mlxbf_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev);
+
+ if (selector == MLXBF_GPIO_HW_MODE) {
+ if (group < MLXBF_NGPIOS_GPIO0)
+ writel(BIT(group), priv->base + MLXBF_GPIO0_FW_CONTROL_CLEAR);
+ else
+ writel(BIT(group % MLXBF_NGPIOS_GPIO0), priv->base + MLXBF_GPIO1_FW_CONTROL_CLEAR);
+ }
+
+ if (selector == MLXBF_GPIO_SW_MODE) {
+ if (group < MLXBF_NGPIOS_GPIO0)
+ writel(BIT(group), priv->base + MLXBF_GPIO0_FW_CONTROL_SET);
+ else
+ writel(BIT(group % MLXBF_NGPIOS_GPIO0), priv->base + MLXBF_GPIO1_FW_CONTROL_SET);
+ }
+
+ return 0;
+}
+
+static int mlxbf_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int offset)
+{
+ struct mlxbf_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev);
+
+ if (offset < MLXBF_NGPIOS_GPIO0)
+ writel(BIT(offset), priv->base + MLXBF_GPIO0_FW_CONTROL_SET);
+ else
+ writel(BIT(offset % MLXBF_NGPIOS_GPIO0), priv->base + MLXBF_GPIO1_FW_CONTROL_SET);
+
+ return 0;
+}
+
+static void mlxbf_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int offset)
+{
+ struct mlxbf_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable GPIO functionality by giving control back to hardware */
+ if (offset < MLXBF_NGPIOS_GPIO0)
+ writel(BIT(offset), priv->base + MLXBF_GPIO0_FW_CONTROL_CLEAR);
+ else
+ writel(BIT(offset % MLXBF_NGPIOS_GPIO0), priv->base + MLXBF_GPIO1_FW_CONTROL_CLEAR);
+
+}
+
+static const struct pinmux_ops mlxbf_pmx_ops = {
+ .get_functions_count = mlxbf_pmx_get_funcs_count,
+ .get_function_name = mlxbf_pmx_get_func_name,
+ .get_function_groups = mlxbf_pmx_get_groups,
+ .set_mux = mlxbf_pmx_set,
+ .gpio_request_enable = mlxbf_gpio_request_enable,
+ .gpio_disable_free = mlxbf_gpio_disable_free,
+};
+
+static struct pinctrl_desc mlxbf_pin_desc = {
+ .name = "pinctrl-mlxbf",
+ .pins = mlxbf_pins,
+ .npins = ARRAY_SIZE(mlxbf_pins),
+ .pctlops = &mlxbf_pinctrl_group_ops,
+ .pmxops = &mlxbf_pmx_ops,
+ .owner = THIS_MODULE,
+};
+
+static int mlxbf_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mlxbf_pinctrl *priv;
+ struct resource *res;
+ int ret;
+
+ BUILD_BUG_ON(ARRAY_SIZE(mlxbf_pinctrl_single_group_names) !=
+ ARRAY_SIZE(mlxbf_pinctrl_single_group_pins));
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ priv->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!priv->base)
+ return -ENOMEM;
+
+ ret = devm_pinctrl_register_and_init(priv->dev,
+ &mlxbf_pin_desc,
+ priv,
+ &priv->pctl);
+ if (ret) {
+ dev_err(priv->dev, "Failed pinctrl register (%d)\n", ret);
+ return ret;
+ }
+
+ ret = pinctrl_enable(priv->pctl);
+ if (ret) {
+ dev_err(priv->dev, "Failed to enable pinctrl (%d)\n", ret);
+ return ret;
+ }
+
+ pinctrl_add_gpio_range(priv->pctl, &mlxbf_pinctrl_gpio_ranges[0]);
+ pinctrl_add_gpio_range(priv->pctl, &mlxbf_pinctrl_gpio_ranges[1]);
+
+ return 0;
+}
+
+static const struct acpi_device_id mlxbf_pinctrl_acpi_ids[] = {
+ { "MLNXBF34", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, mlxbf_pinctrl_acpi_ids);
+
+static struct platform_driver mlxbf_pinctrl_driver = {
+ .driver = {
+ .name = "pinctrl-mlxbf",
+ .acpi_match_table = mlxbf_pinctrl_acpi_ids,
+ },
+ .probe = mlxbf_pinctrl_probe,
+};
+
+module_platform_driver(mlxbf_pinctrl_driver);
+
+MODULE_DESCRIPTION("NVIDIA pinctrl driver");
+MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
+MODULE_LICENSE("Dual BSD/GPL");
This patch adds support to the BlueField-3 SoC pin controller. It allows muxing individual GPIOs to switch from the default hardware mode to software controlled mode. Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> --- drivers/pinctrl/Kconfig | 9 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-mlxbf.c | 353 ++++++++++++++++++++++++++++++++ 3 files changed, 363 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-mlxbf.c