From patchwork Fri Jan 20 23:15:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Daniel Lezcano X-Patchwork-Id: 13110678 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D487AC38A23 for ; Fri, 20 Jan 2023 23:15:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230159AbjATXPy (ORCPT ); Fri, 20 Jan 2023 18:15:54 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52226 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229680AbjATXPu (ORCPT ); Fri, 20 Jan 2023 18:15:50 -0500 Received: from mail-wr1-x431.google.com (mail-wr1-x431.google.com [IPv6:2a00:1450:4864:20::431]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CB8471B545 for ; Fri, 20 Jan 2023 15:15:47 -0800 (PST) Received: by mail-wr1-x431.google.com with SMTP id d14so2414086wrr.9 for ; Fri, 20 Jan 2023 15:15:47 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=SmpmbTelOLm3GxZGJKc3RpPo4g2mgSJUW4mMTFcNbb8=; b=U/z4QGUZDtiQ8kXnYfkagTBBcN0fw9eIOLR+nRuM9WEZrw5v7ha6npdco/9bTop06c UydrAmz3Ikow3YGkW//kOV9sFv1BQpZc2GDvdgPLcG+Ha9qUIvJ+aG6SIFlm20suGpAi WB2dhUP8/HBRqkOre6bhZR2tNEjFQhHwqVP9zVzAPinhBIXs8rmnwms7rDJPJiMn4cK7 7elFOo0Ko6fp1gqKyYhbuyVWBrSqnIQg5OgnKYAZ4S30L7d2/xI3vsFJhYZbxaG0riUs cuu1aOg9YMrB6e1iA3asce1pPxfRrWg2qK4VoNlpnlqw6yYIxGdeAHjVwzr10gQVuYFf FtTg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=SmpmbTelOLm3GxZGJKc3RpPo4g2mgSJUW4mMTFcNbb8=; b=fVKIGBX00b37Aj3e/7HvPeV/kBmmLqRDaHXZbDyWgCuJb8wkEXbBX36K/q5YFu4GQo 2IjSAncJaeEeMZQRVDxfHW6scjShCJSc1RyO2XltZB4RQUK/zo3BvauKH50zrXBbXFJj EU6v+gb/YQAaUnHE/Um0F5mRtiLuAmayc4q1HGoQiTuiygwtUGhNR1+Mff4eDq/D6Hpt 5bOtcFGlVfGlA5pGIZoLWjXEadOElyhU4wHkW6pbHeMZnxj8+impVaxuzSzboeDF2Egb cqZHQH4o3RFK3rXSW7EHtzybC9DyRL3F6sCTqCnOxfYeJk4zjL2/HSOyzDZb9D/HKP0E kWiQ== X-Gm-Message-State: AFqh2kp7yGMSydTpgpJ6sXSAc5BwWVQFWY1U9hXm1T/OSl0TkHXJHDSQ cgIzuQcV1zeZ+Au2O3Ub2rPMoA== X-Google-Smtp-Source: AMrXdXuEaC1/9xNlzYGxPoJX9tujzTdDF++nkLLo8CStyd8MjhEFTzHK64oDhny/U9n1zw9nX+3Esg== X-Received: by 2002:a5d:6389:0:b0:2bf:95dc:436b with SMTP id p9-20020a5d6389000000b002bf95dc436bmr1549148wru.59.1674256546148; Fri, 20 Jan 2023 15:15:46 -0800 (PST) Received: from mai.. (146725694.box.freepro.com. [130.180.211.218]) by smtp.gmail.com with ESMTPSA id t17-20020a05600001d100b00241d21d4652sm36436828wrx.21.2023.01.20.15.15.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 20 Jan 2023 15:15:45 -0800 (PST) From: Daniel Lezcano To: daniel.lezcano@linaro.org, rafael@kernel.org Cc: srinivas.pandruvada@linux.intel.com, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, rui.zhang@intel.com, christophe.jaillet@wanadoo.fr, Amit Kucheria Subject: [PATCH v6 1/3] thermal/acpi: Add ACPI trip point routines Date: Sat, 21 Jan 2023 00:15:28 +0100 Message-Id: <20230120231530.2368330-2-daniel.lezcano@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230120231530.2368330-1-daniel.lezcano@linaro.org> References: <20230120231530.2368330-1-daniel.lezcano@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-acpi@vger.kernel.org The ACPI specification describes the trip points, the device tree bindings as well. The OF code uses the generic trip point structures. The ACPI has their own trip points structure and uses the get_trip_* ops to retrieve them. We can do the same as the OF code and create a set of ACPI functions to retrieve a trip point description. Having a common code for ACPI will help to cleanup the remaining Intel drivers and get rid of the get_trip_* functions. These changes add the ACPI thermal calls to retrieve the basic information we need to be reused in the thermal ACPI and Intel drivers. The different ACPI functions have the generic trip point structure passed as parameter where it is filled. This structure aims to be the one used by all the thermal drivers and the thermal framework. After this series, a couple of Intel drivers and the ACPI thermal driver will still have their own trip points definition but a new series on top of this one will finish the conversion to the generic trip point handling. This series depends on the generic trip point added to the thermal framework and available in the thermal/linux-next branch. https://lkml.org/lkml/2022/10/3/456 It has been tested on a Intel i7-8650U - x280 with the INT3400, the PCH, ACPITZ, and x86_pkg_temp. No regression observed so far. Signed-off-by: Daniel Lezcano Reviewed-by: Zhang Rui Tested-by: srinivas pandruvada Signed-off-by: Rafael J. Wysocki Signed-off-by: Rafael J. Wysocki Signed-off-by: Daniel Lezcano --- V6: - Changed the functions name and prototype to return the temperature instead of passing a pointer - Removed the GTSH function as it does not belong to the ACPI standard - Changed hysteresis -> hyst, temperature -> temp - Changed message level info -> debug - Changed error messages - Return -ENODATA error only - Fixed description functions V5: - Fixed GTSH unit conversion, deciK -> milli C V3: - Removed too simple wrappers - Changed the API to return an error and check the validity of the value - Removed the comments describing the objects - Added kerneldoc - Made the Kconfig option silent - Set the hysteresis value to zero by default V2: - Fixed the missing thermal_acpi.c in the patch Signed-off-by: Daniel Lezcano --- drivers/thermal/Kconfig | 4 + drivers/thermal/Makefile | 1 + drivers/thermal/thermal_acpi.c | 185 +++++++++++++++++++++++++++++++++ include/linux/thermal.h | 7 ++ 4 files changed, 197 insertions(+) create mode 100644 drivers/thermal/thermal_acpi.c diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index e052dae614eb..eaeb2b2ee6e9 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -76,6 +76,10 @@ config THERMAL_OF Say 'Y' here if you need to build thermal infrastructure based on device tree. +config THERMAL_ACPI + depends on ACPI + bool + config THERMAL_WRITABLE_TRIPS bool "Enable writable trip points" help diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 2506c6c8ca83..60f0dfa9aae2 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -13,6 +13,7 @@ thermal_sys-$(CONFIG_THERMAL_NETLINK) += thermal_netlink.o # interface to/from other layers providing sensors thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o thermal_sys-$(CONFIG_THERMAL_OF) += thermal_of.o +thermal_sys-$(CONFIG_THERMAL_ACPI) += thermal_acpi.o # governors thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += gov_fair_share.o diff --git a/drivers/thermal/thermal_acpi.c b/drivers/thermal/thermal_acpi.c new file mode 100644 index 000000000000..c72fca44bc86 --- /dev/null +++ b/drivers/thermal/thermal_acpi.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2022 Linaro Limited + * + * Author: Daniel Lezcano + * + * ACPI thermal configuration + */ +#include +#include +#include +#include +#include + +#include "thermal_core.h" + +/* + * An hysteresis value below zero is invalid and we can consider a + * value greater than 20°K/°C is invalid too. + */ +#define HYST_MIN_DECIK 0 +#define HYST_MAX_DECIK 200 + +/* + * Minimum temperature for full military grade is 218°K (-55°C) and + * max temperature is 448°K (175°C). We can consider those values as + * the boundaries for the [trips] temperature returned by the + * firmware. Any values out of these boundaries may be considered + * bogus and we can assume the firmware has no data to provide. + */ +#define TEMP_MIN_DECIK 2180 +#define TEMP_MAX_DECIK 4480 + +static int thermal_acpi_get_temp(struct acpi_device *adev, char *object_name) +{ + unsigned long long temp; + acpi_status status; + + status = acpi_evaluate_integer(adev->handle, object_name, NULL, &temp); + if (ACPI_FAILURE(status)) { + acpi_handle_debug(adev->handle, "Failed to get temperature object '%s'\n", object_name); + return -ENODATA; + } + + if (temp < TEMP_MIN_DECIK || temp >= TEMP_MAX_DECIK) { + acpi_handle_debug(adev->handle, "Invalid value '%llu' returned by '%s'\n", temp, object_name); + return -ENODATA; + } + + return (int)temp; +} + +/** + * thermal_acpi_active_trip_temp() - Get the specified active trip point + * @adev: Thermal zone ACPI device object to get the description from + * @trip: Trip point structure to be populated on success + * @id: Active cooling level (0 - 9) + * + * Evaluate the _ACx object for the thermal zone represented by @adev + * to obtain the temperature of the active cooling trip point + * corresponding to the active cooling level given by @id and + * initialize @trip as an active trip point using that temperature + * value. + * + * Return: + * * 0 - Success + * * -ENODATA - Failed to get the ACPI object, or the value appears to be inconsistent + */ +int thermal_acpi_active_trip_temp(struct acpi_device *adev, + struct thermal_trip *trip, int id) +{ + char name[] = "_AC0"; + int temp; + + if (id < 0 || id > 9) + return -EINVAL; + + name[3] += id; + + temp = thermal_acpi_get_temp(adev, name); + if (temp < 0) + return temp; + + trip->temperature = deci_kelvin_to_millicelsius(temp); + trip->hysteresis = 0; + trip->type = THERMAL_TRIP_ACTIVE; + + return 0; +} +EXPORT_SYMBOL_GPL(thermal_acpi_active_trip_temp); + +/** + * thermal_acpi_passive_trip_temp() - Get the passive trip point + * @adev: Thermal zone ACPI device object to get the description from + * @trip: Trip point structure to be populated on success + * + * Evaluate the _PSV object for the thermal zone represented by @adev + * to obtain the temperature of the passive cooling trip point and + * initialize @trip as a passive trip point using that temperature + * value. + * + * Return: + * * 0 - Success + * * -ENODATA - Failed to get the ACPI object, or the value appears to be inconsistent + */ +int thermal_acpi_passive_trip_temp(struct acpi_device *adev, struct thermal_trip *trip) +{ + int temp; + + temp = thermal_acpi_get_temp(adev, "_PSV"); + if (temp < 0) + return temp; + + trip->temperature = deci_kelvin_to_millicelsius(temp); + trip->hysteresis = 0; + trip->type = THERMAL_TRIP_PASSIVE; + + return 0; +} +EXPORT_SYMBOL_GPL(thermal_acpi_passive_trip_temp); + +/** + * thermal_acpi_hot_trip_temp() - Get the near critical trip point + * @adev: the ACPI device to get the description from + * @trip: a &struct thermal_trip to be filled if the function succeed + * + * Evaluate the _HOT object for the thermal zone represented by @adev + * to obtain the temperature of the trip point at which the system is + * expected to be put into the S4 sleep state and initialize @trip as + * a hot trip point using that temperature value. + * + * Return: + * * 0 - Success + * * -ENODATA - Failed to get the ACPI object, or the value appears to be inconsistent + */ +int thermal_acpi_hot_trip_temp(struct acpi_device *adev, struct thermal_trip *trip) +{ + int temp; + + temp = thermal_acpi_get_temp(adev, "_HOT"); + if (temp < 0) + return temp; + + trip->temperature = deci_kelvin_to_millicelsius(temp); + trip->hysteresis = 0; + trip->type = THERMAL_TRIP_HOT; + + return 0; +} +EXPORT_SYMBOL_GPL(thermal_acpi_hot_trip_temp); + +/** + * thermal_acpi_critical_trip_temp() - Get the critical trip point + * @adev: the ACPI device to get the description from + * @trip: a &struct thermal_trip to be filled if the function succeed + * + * Evaluate the _CRT object for the thermal zone represented by @adev + * to obtain the temperature of the critical cooling trip point and + * initialize @trip as a critical trip point using that temperature + * value. + * + * Return: + * * 0 - Success + * * -ENODATA - Failed to get the ACPI object, or the value appears to be inconsistent + */ +int thermal_acpi_critical_trip_temp(struct acpi_device *adev, struct thermal_trip *trip) +{ + int temp; + + temp = thermal_acpi_get_temp(adev, "_CRT"); + if (temp < 0) + return temp; + + /* + * The hysteresis value has no sense here because critical + * trip point has no u-turn + */ + trip->temperature = deci_kelvin_to_millicelsius(temp); + trip->hysteresis = 0; + trip->type = THERMAL_TRIP_CRITICAL; + + return 0; +} +EXPORT_SYMBOL_GPL(thermal_acpi_critical_trip_temp); + diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 30353e4b1424..2aee1f0d5fac 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -334,6 +334,13 @@ static inline void devm_thermal_of_zone_unregister(struct device *dev, } #endif +#ifdef CONFIG_THERMAL_ACPI +int thermal_acpi_critical_trip_temp(struct acpi_device *adev, struct thermal_trip *trip); +int thermal_acpi_hot_trip_temp(struct acpi_device *adev, struct thermal_trip *trip); +int thermal_acpi_passive_trip_temp(struct acpi_device *adev, struct thermal_trip *trip); +int thermal_acpi_active_trip_temp(struct acpi_device *adev, struct thermal_trip *trip, int id); +#endif + int __thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, struct thermal_trip *trip); int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,