diff mbox series

[v3,17/18] media: atomisp: csi2-bridge: Add dev_name() to acpi_handle_info() logging

Message ID 20230705213010.390849-18-hdegoede@redhat.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series media: ipu-bridge: Shared with atomisp, rework VCM instantiation | expand

Commit Message

Hans de Goede July 5, 2023, 9:30 p.m. UTC
acpi_handle_info() uses the ACPI path to the handle as prefix for messages
e.g. : "\_SB_.I2C2.CAM8".

This makes it hard for users to figure out which csi2-bridge messages
belong to which sensor since the actual sensor drivers uses the ACPI
device name (typically "HID:00") for logging.

Extend the acpi_handle_info() (and err and warn) logging to also log
the device name to make it easier to match csi2-bridge messages with
sensor driver log messages.

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 .../media/atomisp/pci/atomisp_csi2_bridge.c   | 51 ++++++++++++-------
 1 file changed, 34 insertions(+), 17 deletions(-)

Comments

Andy Shevchenko July 6, 2023, 10:09 a.m. UTC | #1
On Wed, Jul 05, 2023 at 11:30:09PM +0200, Hans de Goede wrote:
> acpi_handle_info() uses the ACPI path to the handle as prefix for messages
> e.g. : "\_SB_.I2C2.CAM8".
> 
> This makes it hard for users to figure out which csi2-bridge messages
> belong to which sensor since the actual sensor drivers uses the ACPI
> device name (typically "HID:00") for logging.
> 
> Extend the acpi_handle_info() (and err and warn) logging to also log
> the device name to make it easier to match csi2-bridge messages with
> sensor driver log messages.

Fine by me, one suggestion below (up to you, guys)
Reviewed-by: Andy Shevchenko <andy@kernel.org>

> Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  .../media/atomisp/pci/atomisp_csi2_bridge.c   | 51 ++++++++++++-------
>  1 file changed, 34 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> index 551c6fd244fd..8124be486e2e 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> @@ -131,7 +131,8 @@ static char *gmin_cfg_get_dsm(struct acpi_device *adev, const char *key)
>  			if (!val)
>  				break;
>  
> -			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
> +			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
> +					 dev_name(&adev->dev), key, val);

Maybe (maybe!) it's a candidate to have something like

v4l2_acpi_log_info(adev, ...) which combines both and unloads the code from
thinking about it?

>  			break;
>  		}
>  	}
> @@ -156,7 +157,8 @@ static char *gmin_cfg_get_dmi_override(struct acpi_device *adev, const char *key
>  		if (strcmp(key, gv->key))
>  			continue;
>  
> -		acpi_handle_info(adev->handle, "Using DMI entry %s=%s\n", key, gv->val);
> +		acpi_handle_info(adev->handle, "%s: Using DMI entry %s=%s\n",
> +				 dev_name(&adev->dev), key, gv->val);
>  		return kstrdup(gv->val, GFP_KERNEL);
>  	}
>  
> @@ -192,7 +194,8 @@ static int gmin_cfg_get_int(struct acpi_device *adev, const char *key, int defau
>  	return int_val;
>  
>  out_use_default:
> -	acpi_handle_info(adev->handle, "Using default %s=%d\n", key, default_val);
> +	acpi_handle_info(adev->handle, "%s: Using default %s=%d\n",
> +			 dev_name(&adev->dev), key, default_val);
>  	return default_val;
>  }
>  
> @@ -235,7 +238,8 @@ static int atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(struct acpi_device *adev)
>  	ACPI_FREE(buffer.pointer);
>  
>  	if (ret < 0)
> -		acpi_handle_warn(adev->handle, "Could not find PMC clk in _PR0\n");
> +		acpi_handle_warn(adev->handle, "%s: Could not find PMC clk in _PR0\n",
> +				 dev_name(&adev->dev));
>  
>  	return ret;
>  }
> @@ -254,7 +258,8 @@ static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
>  	clk = clk_get(NULL, name);
>  	if (IS_ERR(clk)) {
>  		ret = PTR_ERR(clk);
> -		acpi_handle_err(adev->handle, "Error getting clk %s:%d\n", name, ret);
> +		acpi_handle_err(adev->handle, "%s: Error getting clk %s: %d\n",
> +				dev_name(&adev->dev), name, ret);
>  		return ret;
>  	}
>  
> @@ -268,7 +273,8 @@ static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
>  	if (!ret)
>  		ret = clk_set_rate(clk, PMC_CLK_RATE_19_2MHZ);
>  	if (ret)
> -		acpi_handle_err(adev->handle, "Error setting clk-rate for %s:%d\n", name, ret);
> +		acpi_handle_err(adev->handle, "%s: Error setting clk-rate for %s: %d\n",
> +				dev_name(&adev->dev), name, ret);
>  
>  	clk_put(clk);
>  	return ret;
> @@ -317,7 +323,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
>  
>  	if (i == data->settings_count) {
>  		acpi_handle_warn(data->adev->handle,
> -				 "Could not find DSM GPIO settings for pin %u\n", pin);
> +				 "%s: Could not find DSM GPIO settings for pin %u\n",
> +				 dev_name(&data->adev->dev), pin);
>  		return 1;
>  	}
>  
> @@ -329,7 +336,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
>  		name = "powerdown-gpios";
>  		break;
>  	default:
> -		acpi_handle_warn(data->adev->handle, "Unknown GPIO type 0x%02lx for pin %u\n",
> +		acpi_handle_warn(data->adev->handle, "%s: Unknown GPIO type 0x%02lx for pin %u\n",
> +				 dev_name(&data->adev->dev),
>  				 INTEL_GPIO_DSM_TYPE(settings), pin);
>  		return 1;
>  	}
> @@ -354,7 +362,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
>  	data->map->mapping[i].size = 1;
>  	data->map_count++;
>  
> -	acpi_handle_info(data->adev->handle, "%s crs %d %s pin %u active-%s\n", name,
> +	acpi_handle_info(data->adev->handle, "%s: %s crs %d %s pin %u active-%s\n",
> +			 dev_name(&data->adev->dev), name,
>  			 data->res_count - 1, agpio->resource_source.string_ptr,
>  			 pin, active_low ? "low" : "high");
>  
> @@ -391,7 +400,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  	obj = acpi_evaluate_dsm_typed(adev->handle, &intel_sensor_module_guid,
>  				      0x00, 1, NULL, ACPI_TYPE_STRING);
>  	if (obj) {
> -		acpi_handle_info(adev->handle, "Sensor module id: '%s'\n", obj->string.pointer);
> +		acpi_handle_info(adev->handle, "%s: Sensor module id: '%s'\n",
> +				 dev_name(&adev->dev), obj->string.pointer);
>  		ACPI_FREE(obj);
>  	}
>  
> @@ -405,7 +415,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  				      &intel_sensor_gpio_info_guid, 0x00, 1,
>  				      NULL, ACPI_TYPE_INTEGER);
>  	if (!obj) {
> -		acpi_handle_err(adev->handle, "No _DSM entry for GPIO pin count\n");
> +		acpi_handle_err(adev->handle, "%s: No _DSM entry for GPIO pin count\n",
> +				dev_name(&adev->dev));
>  		return -EIO;
>  	}
>  
> @@ -413,7 +424,9 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  	ACPI_FREE(obj);
>  
>  	if (data.settings_count > CSI2_MAX_ACPI_GPIOS) {
> -		acpi_handle_err(adev->handle, "Too many GPIOs %u > %u\n", data.settings_count, CSI2_MAX_ACPI_GPIOS);
> +		acpi_handle_err(adev->handle, "%s: Too many GPIOs %u > %u\n",
> +				dev_name(&adev->dev), data.settings_count,
> +				CSI2_MAX_ACPI_GPIOS);
>  		return -EOVERFLOW;
>  	}
>  
> @@ -427,7 +440,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  					      0x00, i + 2,
>  					      NULL, ACPI_TYPE_INTEGER);
>  		if (!obj) {
> -			acpi_handle_err(adev->handle, "No _DSM entry for pin %u\n", i);
> +			acpi_handle_err(adev->handle, "%s: No _DSM entry for pin %u\n",
> +					dev_name(&adev->dev), i);
>  			return -EIO;
>  		}
>  
> @@ -442,7 +456,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  			    INTEL_GPIO_DSM_PIN(data.settings[j]))
>  				continue;
>  
> -			acpi_handle_err(adev->handle, "Duplicate pin number %lu\n",
> +			acpi_handle_err(adev->handle, "%s: Duplicate pin number %lu\n",
> +					dev_name(&adev->dev),
>  					INTEL_GPIO_DSM_PIN(data.settings[i]));
>  			return -EIO;
>  		}
> @@ -463,12 +478,14 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  
>  	if (data.map_count != data.settings_count ||
>  	    data.res_count != data.settings_count)
> -		acpi_handle_warn(adev->handle, "ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
> -				 data.settings_count, data.res_count, data.map_count);
> +		acpi_handle_warn(adev->handle, "%s: ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
> +				 dev_name(&adev->dev), data.settings_count,
> +				 data.res_count, data.map_count);
>  
>  	ret = acpi_dev_add_driver_gpios(adev, data.map->mapping);
>  	if (ret)
> -		acpi_handle_err(adev->handle, "Error adding driver GPIOs: %d\n", ret);
> +		acpi_handle_err(adev->handle, "%s: Error adding driver GPIOs: %d\n",
> +				dev_name(&adev->dev), ret);
>  
>  	return ret;
>  }
> -- 
> 2.41.0
>
Laurent Pinchart July 6, 2023, 11:12 a.m. UTC | #2
On Thu, Jul 06, 2023 at 01:09:29PM +0300, Andy Shevchenko wrote:
> On Wed, Jul 05, 2023 at 11:30:09PM +0200, Hans de Goede wrote:
> > acpi_handle_info() uses the ACPI path to the handle as prefix for messages
> > e.g. : "\_SB_.I2C2.CAM8".
> > 
> > This makes it hard for users to figure out which csi2-bridge messages
> > belong to which sensor since the actual sensor drivers uses the ACPI
> > device name (typically "HID:00") for logging.
> > 
> > Extend the acpi_handle_info() (and err and warn) logging to also log
> > the device name to make it easier to match csi2-bridge messages with
> > sensor driver log messages.
> 
> Fine by me, one suggestion below (up to you, guys)
> Reviewed-by: Andy Shevchenko <andy@kernel.org>
> 
> > Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> >  .../media/atomisp/pci/atomisp_csi2_bridge.c   | 51 ++++++++++++-------
> >  1 file changed, 34 insertions(+), 17 deletions(-)
> > 
> > diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> > index 551c6fd244fd..8124be486e2e 100644
> > --- a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> > +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> > @@ -131,7 +131,8 @@ static char *gmin_cfg_get_dsm(struct acpi_device *adev, const char *key)
> >  			if (!val)
> >  				break;
> >  
> > -			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
> > +			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
> > +					 dev_name(&adev->dev), key, val);
> 
> Maybe (maybe!) it's a candidate to have something like
> 
> v4l2_acpi_log_info(adev, ...) which combines both and unloads the code from
> thinking about it?

Or acpi_dev_info() that would take an acpi_device pointer. Or just just
dev_info(&adev->dev) ?

> >  			break;
> >  		}
> >  	}
> > @@ -156,7 +157,8 @@ static char *gmin_cfg_get_dmi_override(struct acpi_device *adev, const char *key
> >  		if (strcmp(key, gv->key))
> >  			continue;
> >  
> > -		acpi_handle_info(adev->handle, "Using DMI entry %s=%s\n", key, gv->val);
> > +		acpi_handle_info(adev->handle, "%s: Using DMI entry %s=%s\n",
> > +				 dev_name(&adev->dev), key, gv->val);
> >  		return kstrdup(gv->val, GFP_KERNEL);
> >  	}
> >  
> > @@ -192,7 +194,8 @@ static int gmin_cfg_get_int(struct acpi_device *adev, const char *key, int defau
> >  	return int_val;
> >  
> >  out_use_default:
> > -	acpi_handle_info(adev->handle, "Using default %s=%d\n", key, default_val);
> > +	acpi_handle_info(adev->handle, "%s: Using default %s=%d\n",
> > +			 dev_name(&adev->dev), key, default_val);
> >  	return default_val;
> >  }
> >  
> > @@ -235,7 +238,8 @@ static int atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(struct acpi_device *adev)
> >  	ACPI_FREE(buffer.pointer);
> >  
> >  	if (ret < 0)
> > -		acpi_handle_warn(adev->handle, "Could not find PMC clk in _PR0\n");
> > +		acpi_handle_warn(adev->handle, "%s: Could not find PMC clk in _PR0\n",
> > +				 dev_name(&adev->dev));
> >  
> >  	return ret;
> >  }
> > @@ -254,7 +258,8 @@ static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
> >  	clk = clk_get(NULL, name);
> >  	if (IS_ERR(clk)) {
> >  		ret = PTR_ERR(clk);
> > -		acpi_handle_err(adev->handle, "Error getting clk %s:%d\n", name, ret);
> > +		acpi_handle_err(adev->handle, "%s: Error getting clk %s: %d\n",
> > +				dev_name(&adev->dev), name, ret);
> >  		return ret;
> >  	}
> >  
> > @@ -268,7 +273,8 @@ static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
> >  	if (!ret)
> >  		ret = clk_set_rate(clk, PMC_CLK_RATE_19_2MHZ);
> >  	if (ret)
> > -		acpi_handle_err(adev->handle, "Error setting clk-rate for %s:%d\n", name, ret);
> > +		acpi_handle_err(adev->handle, "%s: Error setting clk-rate for %s: %d\n",
> > +				dev_name(&adev->dev), name, ret);
> >  
> >  	clk_put(clk);
> >  	return ret;
> > @@ -317,7 +323,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
> >  
> >  	if (i == data->settings_count) {
> >  		acpi_handle_warn(data->adev->handle,
> > -				 "Could not find DSM GPIO settings for pin %u\n", pin);
> > +				 "%s: Could not find DSM GPIO settings for pin %u\n",
> > +				 dev_name(&data->adev->dev), pin);
> >  		return 1;
> >  	}
> >  
> > @@ -329,7 +336,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
> >  		name = "powerdown-gpios";
> >  		break;
> >  	default:
> > -		acpi_handle_warn(data->adev->handle, "Unknown GPIO type 0x%02lx for pin %u\n",
> > +		acpi_handle_warn(data->adev->handle, "%s: Unknown GPIO type 0x%02lx for pin %u\n",
> > +				 dev_name(&data->adev->dev),
> >  				 INTEL_GPIO_DSM_TYPE(settings), pin);
> >  		return 1;
> >  	}
> > @@ -354,7 +362,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
> >  	data->map->mapping[i].size = 1;
> >  	data->map_count++;
> >  
> > -	acpi_handle_info(data->adev->handle, "%s crs %d %s pin %u active-%s\n", name,
> > +	acpi_handle_info(data->adev->handle, "%s: %s crs %d %s pin %u active-%s\n",
> > +			 dev_name(&data->adev->dev), name,
> >  			 data->res_count - 1, agpio->resource_source.string_ptr,
> >  			 pin, active_low ? "low" : "high");
> >  
> > @@ -391,7 +400,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
> >  	obj = acpi_evaluate_dsm_typed(adev->handle, &intel_sensor_module_guid,
> >  				      0x00, 1, NULL, ACPI_TYPE_STRING);
> >  	if (obj) {
> > -		acpi_handle_info(adev->handle, "Sensor module id: '%s'\n", obj->string.pointer);
> > +		acpi_handle_info(adev->handle, "%s: Sensor module id: '%s'\n",
> > +				 dev_name(&adev->dev), obj->string.pointer);
> >  		ACPI_FREE(obj);
> >  	}
> >  
> > @@ -405,7 +415,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
> >  				      &intel_sensor_gpio_info_guid, 0x00, 1,
> >  				      NULL, ACPI_TYPE_INTEGER);
> >  	if (!obj) {
> > -		acpi_handle_err(adev->handle, "No _DSM entry for GPIO pin count\n");
> > +		acpi_handle_err(adev->handle, "%s: No _DSM entry for GPIO pin count\n",
> > +				dev_name(&adev->dev));
> >  		return -EIO;
> >  	}
> >  
> > @@ -413,7 +424,9 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
> >  	ACPI_FREE(obj);
> >  
> >  	if (data.settings_count > CSI2_MAX_ACPI_GPIOS) {
> > -		acpi_handle_err(adev->handle, "Too many GPIOs %u > %u\n", data.settings_count, CSI2_MAX_ACPI_GPIOS);
> > +		acpi_handle_err(adev->handle, "%s: Too many GPIOs %u > %u\n",
> > +				dev_name(&adev->dev), data.settings_count,
> > +				CSI2_MAX_ACPI_GPIOS);
> >  		return -EOVERFLOW;
> >  	}
> >  
> > @@ -427,7 +440,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
> >  					      0x00, i + 2,
> >  					      NULL, ACPI_TYPE_INTEGER);
> >  		if (!obj) {
> > -			acpi_handle_err(adev->handle, "No _DSM entry for pin %u\n", i);
> > +			acpi_handle_err(adev->handle, "%s: No _DSM entry for pin %u\n",
> > +					dev_name(&adev->dev), i);
> >  			return -EIO;
> >  		}
> >  
> > @@ -442,7 +456,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
> >  			    INTEL_GPIO_DSM_PIN(data.settings[j]))
> >  				continue;
> >  
> > -			acpi_handle_err(adev->handle, "Duplicate pin number %lu\n",
> > +			acpi_handle_err(adev->handle, "%s: Duplicate pin number %lu\n",
> > +					dev_name(&adev->dev),
> >  					INTEL_GPIO_DSM_PIN(data.settings[i]));
> >  			return -EIO;
> >  		}
> > @@ -463,12 +478,14 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
> >  
> >  	if (data.map_count != data.settings_count ||
> >  	    data.res_count != data.settings_count)
> > -		acpi_handle_warn(adev->handle, "ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
> > -				 data.settings_count, data.res_count, data.map_count);
> > +		acpi_handle_warn(adev->handle, "%s: ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
> > +				 dev_name(&adev->dev), data.settings_count,
> > +				 data.res_count, data.map_count);
> >  
> >  	ret = acpi_dev_add_driver_gpios(adev, data.map->mapping);
> >  	if (ret)
> > -		acpi_handle_err(adev->handle, "Error adding driver GPIOs: %d\n", ret);
> > +		acpi_handle_err(adev->handle, "%s: Error adding driver GPIOs: %d\n",
> > +				dev_name(&adev->dev), ret);
> >  
> >  	return ret;
> >  }
Andy Shevchenko July 6, 2023, 12:23 p.m. UTC | #3
On Thu, Jul 06, 2023 at 02:12:24PM +0300, Laurent Pinchart wrote:
> On Thu, Jul 06, 2023 at 01:09:29PM +0300, Andy Shevchenko wrote:
> > On Wed, Jul 05, 2023 at 11:30:09PM +0200, Hans de Goede wrote:

...

> > > -			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
> > > +			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
> > > +					 dev_name(&adev->dev), key, val);
> > 
> > Maybe (maybe!) it's a candidate to have something like
> > 
> > v4l2_acpi_log_info(adev, ...) which combines both and unloads the code from
> > thinking about it?
> 
> Or acpi_dev_info() that would take an acpi_device pointer.

(which is an equivalent to the below)

> Or just just dev_info(&adev->dev) ?

The point is to print ACPI handle *and* device name. There are no existing
helpers for that.
Laurent Pinchart July 6, 2023, 1:07 p.m. UTC | #4
On Thu, Jul 06, 2023 at 03:23:33PM +0300, Andy Shevchenko wrote:
> On Thu, Jul 06, 2023 at 02:12:24PM +0300, Laurent Pinchart wrote:
> > On Thu, Jul 06, 2023 at 01:09:29PM +0300, Andy Shevchenko wrote:
> > > On Wed, Jul 05, 2023 at 11:30:09PM +0200, Hans de Goede wrote:
> 
> ...
> 
> > > > -			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
> > > > +			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
> > > > +					 dev_name(&adev->dev), key, val);
> > > 
> > > Maybe (maybe!) it's a candidate to have something like
> > > 
> > > v4l2_acpi_log_info(adev, ...) which combines both and unloads the code from
> > > thinking about it?
> > 
> > Or acpi_dev_info() that would take an acpi_device pointer.
> 
> (which is an equivalent to the below)
> 
> > Or just just dev_info(&adev->dev) ?
> 
> The point is to print ACPI handle *and* device name. There are no existing
> helpers for that.

Then a new acpi_dev_info(struct acpi_device *adev, ...) could do that.
It shouldn't be V4L2-specific in my opinion.
Andy Shevchenko July 6, 2023, 1:22 p.m. UTC | #5
On Thu, Jul 06, 2023 at 04:07:08PM +0300, Laurent Pinchart wrote:
> On Thu, Jul 06, 2023 at 03:23:33PM +0300, Andy Shevchenko wrote:
> > On Thu, Jul 06, 2023 at 02:12:24PM +0300, Laurent Pinchart wrote:
> > > On Thu, Jul 06, 2023 at 01:09:29PM +0300, Andy Shevchenko wrote:
> > > > On Wed, Jul 05, 2023 at 11:30:09PM +0200, Hans de Goede wrote:

...

> > > > > -			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
> > > > > +			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
> > > > > +					 dev_name(&adev->dev), key, val);
> > > > 
> > > > Maybe (maybe!) it's a candidate to have something like
> > > > 
> > > > v4l2_acpi_log_info(adev, ...) which combines both and unloads the code from
> > > > thinking about it?
> > > 
> > > Or acpi_dev_info() that would take an acpi_device pointer.
> > 
> > (which is an equivalent to the below)
> > 
> > > Or just just dev_info(&adev->dev) ?
> > 
> > The point is to print ACPI handle *and* device name. There are no existing
> > helpers for that.
> 
> Then a new acpi_dev_info(struct acpi_device *adev, ...) could do that.
> It shouldn't be V4L2-specific in my opinion.

But
1) so far seems only v4l2 is interested in this information (I haven't checked
   for existing users outside of v4l2);
2) the proposed naming doesn't suggest it's also about ACPI handle. :-)

Although ACPI seems a good common denominator for these, indeed.
Sakari Ailus July 6, 2023, 1:43 p.m. UTC | #6
On Thu, Jul 06, 2023 at 04:07:08PM +0300, Laurent Pinchart wrote:
> On Thu, Jul 06, 2023 at 03:23:33PM +0300, Andy Shevchenko wrote:
> > On Thu, Jul 06, 2023 at 02:12:24PM +0300, Laurent Pinchart wrote:
> > > On Thu, Jul 06, 2023 at 01:09:29PM +0300, Andy Shevchenko wrote:
> > > > On Wed, Jul 05, 2023 at 11:30:09PM +0200, Hans de Goede wrote:
> > 
> > ...
> > 
> > > > > -			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
> > > > > +			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
> > > > > +					 dev_name(&adev->dev), key, val);
> > > > 
> > > > Maybe (maybe!) it's a candidate to have something like
> > > > 
> > > > v4l2_acpi_log_info(adev, ...) which combines both and unloads the code from
> > > > thinking about it?
> > > 
> > > Or acpi_dev_info() that would take an acpi_device pointer.
> > 
> > (which is an equivalent to the below)
> > 
> > > Or just just dev_info(&adev->dev) ?
> > 
> > The point is to print ACPI handle *and* device name. There are no existing
> > helpers for that.
> 
> Then a new acpi_dev_info(struct acpi_device *adev, ...) could do that.
> It shouldn't be V4L2-specific in my opinion.

I certainy have no objections for having a helper for this, but IMO the
current code is fine, too.
diff mbox series

Patch

diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
index 551c6fd244fd..8124be486e2e 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
@@ -131,7 +131,8 @@  static char *gmin_cfg_get_dsm(struct acpi_device *adev, const char *key)
 			if (!val)
 				break;
 
-			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
+			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
+					 dev_name(&adev->dev), key, val);
 			break;
 		}
 	}
@@ -156,7 +157,8 @@  static char *gmin_cfg_get_dmi_override(struct acpi_device *adev, const char *key
 		if (strcmp(key, gv->key))
 			continue;
 
-		acpi_handle_info(adev->handle, "Using DMI entry %s=%s\n", key, gv->val);
+		acpi_handle_info(adev->handle, "%s: Using DMI entry %s=%s\n",
+				 dev_name(&adev->dev), key, gv->val);
 		return kstrdup(gv->val, GFP_KERNEL);
 	}
 
@@ -192,7 +194,8 @@  static int gmin_cfg_get_int(struct acpi_device *adev, const char *key, int defau
 	return int_val;
 
 out_use_default:
-	acpi_handle_info(adev->handle, "Using default %s=%d\n", key, default_val);
+	acpi_handle_info(adev->handle, "%s: Using default %s=%d\n",
+			 dev_name(&adev->dev), key, default_val);
 	return default_val;
 }
 
@@ -235,7 +238,8 @@  static int atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(struct acpi_device *adev)
 	ACPI_FREE(buffer.pointer);
 
 	if (ret < 0)
-		acpi_handle_warn(adev->handle, "Could not find PMC clk in _PR0\n");
+		acpi_handle_warn(adev->handle, "%s: Could not find PMC clk in _PR0\n",
+				 dev_name(&adev->dev));
 
 	return ret;
 }
@@ -254,7 +258,8 @@  static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
 	clk = clk_get(NULL, name);
 	if (IS_ERR(clk)) {
 		ret = PTR_ERR(clk);
-		acpi_handle_err(adev->handle, "Error getting clk %s:%d\n", name, ret);
+		acpi_handle_err(adev->handle, "%s: Error getting clk %s: %d\n",
+				dev_name(&adev->dev), name, ret);
 		return ret;
 	}
 
@@ -268,7 +273,8 @@  static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
 	if (!ret)
 		ret = clk_set_rate(clk, PMC_CLK_RATE_19_2MHZ);
 	if (ret)
-		acpi_handle_err(adev->handle, "Error setting clk-rate for %s:%d\n", name, ret);
+		acpi_handle_err(adev->handle, "%s: Error setting clk-rate for %s: %d\n",
+				dev_name(&adev->dev), name, ret);
 
 	clk_put(clk);
 	return ret;
@@ -317,7 +323,8 @@  static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
 
 	if (i == data->settings_count) {
 		acpi_handle_warn(data->adev->handle,
-				 "Could not find DSM GPIO settings for pin %u\n", pin);
+				 "%s: Could not find DSM GPIO settings for pin %u\n",
+				 dev_name(&data->adev->dev), pin);
 		return 1;
 	}
 
@@ -329,7 +336,8 @@  static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
 		name = "powerdown-gpios";
 		break;
 	default:
-		acpi_handle_warn(data->adev->handle, "Unknown GPIO type 0x%02lx for pin %u\n",
+		acpi_handle_warn(data->adev->handle, "%s: Unknown GPIO type 0x%02lx for pin %u\n",
+				 dev_name(&data->adev->dev),
 				 INTEL_GPIO_DSM_TYPE(settings), pin);
 		return 1;
 	}
@@ -354,7 +362,8 @@  static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
 	data->map->mapping[i].size = 1;
 	data->map_count++;
 
-	acpi_handle_info(data->adev->handle, "%s crs %d %s pin %u active-%s\n", name,
+	acpi_handle_info(data->adev->handle, "%s: %s crs %d %s pin %u active-%s\n",
+			 dev_name(&data->adev->dev), name,
 			 data->res_count - 1, agpio->resource_source.string_ptr,
 			 pin, active_low ? "low" : "high");
 
@@ -391,7 +400,8 @@  static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
 	obj = acpi_evaluate_dsm_typed(adev->handle, &intel_sensor_module_guid,
 				      0x00, 1, NULL, ACPI_TYPE_STRING);
 	if (obj) {
-		acpi_handle_info(adev->handle, "Sensor module id: '%s'\n", obj->string.pointer);
+		acpi_handle_info(adev->handle, "%s: Sensor module id: '%s'\n",
+				 dev_name(&adev->dev), obj->string.pointer);
 		ACPI_FREE(obj);
 	}
 
@@ -405,7 +415,8 @@  static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
 				      &intel_sensor_gpio_info_guid, 0x00, 1,
 				      NULL, ACPI_TYPE_INTEGER);
 	if (!obj) {
-		acpi_handle_err(adev->handle, "No _DSM entry for GPIO pin count\n");
+		acpi_handle_err(adev->handle, "%s: No _DSM entry for GPIO pin count\n",
+				dev_name(&adev->dev));
 		return -EIO;
 	}
 
@@ -413,7 +424,9 @@  static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
 	ACPI_FREE(obj);
 
 	if (data.settings_count > CSI2_MAX_ACPI_GPIOS) {
-		acpi_handle_err(adev->handle, "Too many GPIOs %u > %u\n", data.settings_count, CSI2_MAX_ACPI_GPIOS);
+		acpi_handle_err(adev->handle, "%s: Too many GPIOs %u > %u\n",
+				dev_name(&adev->dev), data.settings_count,
+				CSI2_MAX_ACPI_GPIOS);
 		return -EOVERFLOW;
 	}
 
@@ -427,7 +440,8 @@  static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
 					      0x00, i + 2,
 					      NULL, ACPI_TYPE_INTEGER);
 		if (!obj) {
-			acpi_handle_err(adev->handle, "No _DSM entry for pin %u\n", i);
+			acpi_handle_err(adev->handle, "%s: No _DSM entry for pin %u\n",
+					dev_name(&adev->dev), i);
 			return -EIO;
 		}
 
@@ -442,7 +456,8 @@  static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
 			    INTEL_GPIO_DSM_PIN(data.settings[j]))
 				continue;
 
-			acpi_handle_err(adev->handle, "Duplicate pin number %lu\n",
+			acpi_handle_err(adev->handle, "%s: Duplicate pin number %lu\n",
+					dev_name(&adev->dev),
 					INTEL_GPIO_DSM_PIN(data.settings[i]));
 			return -EIO;
 		}
@@ -463,12 +478,14 @@  static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
 
 	if (data.map_count != data.settings_count ||
 	    data.res_count != data.settings_count)
-		acpi_handle_warn(adev->handle, "ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
-				 data.settings_count, data.res_count, data.map_count);
+		acpi_handle_warn(adev->handle, "%s: ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
+				 dev_name(&adev->dev), data.settings_count,
+				 data.res_count, data.map_count);
 
 	ret = acpi_dev_add_driver_gpios(adev, data.map->mapping);
 	if (ret)
-		acpi_handle_err(adev->handle, "Error adding driver GPIOs: %d\n", ret);
+		acpi_handle_err(adev->handle, "%s: Error adding driver GPIOs: %d\n",
+				dev_name(&adev->dev), ret);
 
 	return ret;
 }