diff mbox series

[13/13] iio: temp: ltc2983: Use __free(fwnode_handle) to replace fwnode_handle_put() calls

Message ID 20240114172009.179893-14-jic23@kernel.org (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. | expand

Commit Message

Jonathan Cameron Jan. 14, 2024, 5:20 p.m. UTC
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This use of the new cleanup.h scope based freeing infrastructure allows
us to exit directly from error conditions and in the good path with
the reference obtained from fwnode_find_reference() (which may be an error
pointer) automatically released.

Cc: Cosmin Tanislav <cosmin.tanislav@analog.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/temperature/ltc2983.c | 70 ++++++++++---------------------
 1 file changed, 21 insertions(+), 49 deletions(-)

Comments

Nuno Sá Jan. 15, 2024, 10:29 a.m. UTC | #1
On Sun, 2024-01-14 at 17:20 +0000, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> This use of the new cleanup.h scope based freeing infrastructure allows
> us to exit directly from error conditions and in the good path with
> the reference obtained from fwnode_find_reference() (which may be an error
> pointer) automatically released.
> 
> Cc: Cosmin Tanislav <cosmin.tanislav@analog.com>
> Cc: Nuno Sá <nuno.sa@analog.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---

I guess this one could also benefit from using dev_err_probe(). Anyways:

Reviewed-by: Nuno Sa <nuno.sa@analog.com>

I might also be able to test this one...

>  drivers/iio/temperature/ltc2983.c | 70 ++++++++++---------------------
>  1 file changed, 21 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/iio/temperature/ltc2983.c
> b/drivers/iio/temperature/ltc2983.c
> index fcb96c44d954..4357364e611e 100644
> --- a/drivers/iio/temperature/ltc2983.c
> +++ b/drivers/iio/temperature/ltc2983.c
> @@ -656,7 +656,7 @@ ltc2983_thermocouple_new(const struct fwnode_handle
> *child, struct ltc2983_data
>  			 const struct ltc2983_sensor *sensor)
>  {
>  	struct ltc2983_thermocouple *thermo;
> -	struct fwnode_handle *ref;
> +	struct fwnode_handle *ref __free(fwnode_handle) = NULL;
>  	u32 oc_current;
>  	int ret;
>  
> @@ -714,7 +714,7 @@ ltc2983_thermocouple_new(const struct fwnode_handle
> *child, struct ltc2983_data
>  			 * the error right away.
>  			 */
>  			dev_err(&st->spi->dev, "Property reg must be
> given\n");
> -			goto fail;
> +			return ERR_PTR(ret);
>  		}
>  	}
>  
> @@ -725,22 +725,15 @@ ltc2983_thermocouple_new(const struct fwnode_handle
> *child, struct ltc2983_data
>  		thermo->custom = __ltc2983_custom_sensor_new(st, child,
>  							     propname, false,
>  							     16384, true);
> -		if (IS_ERR(thermo->custom)) {
> -			ret = PTR_ERR(thermo->custom);
> -			goto fail;
> -		}
> +		if (IS_ERR(thermo->custom))
> +			return ERR_CAST(thermo->custom);
>  	}
>  
>  	/* set common parameters */
>  	thermo->sensor.fault_handler = ltc2983_thermocouple_fault_handler;
>  	thermo->sensor.assign_chan = ltc2983_thermocouple_assign_chan;
>  
> -	fwnode_handle_put(ref);
>  	return &thermo->sensor;
> -
> -fail:
> -	fwnode_handle_put(ref);
> -	return ERR_PTR(ret);
>  }
>  
>  static struct ltc2983_sensor *
> @@ -750,7 +743,7 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct
> ltc2983_data *st,
>  	struct ltc2983_rtd *rtd;
>  	int ret = 0;
>  	struct device *dev = &st->spi->dev;
> -	struct fwnode_handle *ref;
> +	struct fwnode_handle *ref __free(fwnode_handle) = NULL;
>  	u32 excitation_current = 0, n_wires = 0;
>  
>  	rtd = devm_kzalloc(dev, sizeof(*rtd), GFP_KERNEL);
> @@ -766,7 +759,7 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct
> ltc2983_data *st,
>  	ret = fwnode_property_read_u32(ref, "reg", &rtd->r_sense_chan);
>  	if (ret) {
>  		dev_err(dev, "Property reg must be given\n");
> -		goto fail;
> +		return ERR_PTR(ret);
>  	}
>  
>  	ret = fwnode_property_read_u32(child, "adi,number-of-wires",
> &n_wires);
> @@ -787,8 +780,7 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct
> ltc2983_data *st,
>  			break;
>  		default:
>  			dev_err(dev, "Invalid number of wires:%u\n",
> n_wires);
> -			ret = -EINVAL;
> -			goto fail;
> +			return ERR_PTR(-EINVAL);
>  		}
>  	}
>  
> @@ -798,8 +790,7 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct
> ltc2983_data *st,
>  			if (n_wires == 2 || n_wires == 3) {
>  				dev_err(dev,
>  					"Rotation not allowed for 2/3 Wire
> RTDs");
> -				ret = -EINVAL;
> -				goto fail;
> +				return ERR_PTR(-EINVAL);
>  			}
>  			rtd->sensor_config |= LTC2983_RTD_C_ROTATE(1);
>  		} else {
> @@ -829,16 +820,14 @@ ltc2983_rtd_new(const struct fwnode_handle *child,
> struct ltc2983_data *st,
>  				"Invalid rsense chann:%d to use in kelvin
> rsense",
>  				rtd->r_sense_chan);
>  
> -			ret = -EINVAL;
> -			goto fail;
> +			return ERR_PTR(-EINVAL);
>  		}
>  
>  		if (sensor->chan < min || sensor->chan > max) {
>  			dev_err(dev, "Invalid chann:%d for the rtd config",
>  				sensor->chan);
>  
> -			ret = -EINVAL;
> -			goto fail;
> +			return ERR_PTR(-EINVAL);
>  		}
>  	} else {
>  		/* same as differential case */
> @@ -846,8 +835,7 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct
> ltc2983_data *st,
>  			dev_err(&st->spi->dev,
>  				"Invalid chann:%d for RTD", sensor->chan);
>  
> -			ret = -EINVAL;
> -			goto fail;
> +			return ERR_PTR(-EINVAL);
>  		}
>  	}
>  
> @@ -856,10 +844,8 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct
> ltc2983_data *st,
>  		rtd->custom = __ltc2983_custom_sensor_new(st, child,
>  							  "adi,custom-rtd",
>  							  false, 2048,
> false);
> -		if (IS_ERR(rtd->custom)) {
> -			ret = PTR_ERR(rtd->custom);
> -			goto fail;
> -		}
> +		if (IS_ERR(rtd->custom))
> +			return ERR_CAST(rtd->custom);
>  	}
>  
>  	/* set common parameters */
> @@ -901,18 +887,13 @@ ltc2983_rtd_new(const struct fwnode_handle *child,
> struct ltc2983_data *st,
>  			dev_err(&st->spi->dev,
>  				"Invalid value for excitation current(%u)",
>  				excitation_current);
> -			ret = -EINVAL;
> -			goto fail;
> +			return ERR_PTR(-EINVAL);
>  		}
>  	}
>  
>  	fwnode_property_read_u32(child, "adi,rtd-curve", &rtd->rtd_curve);
>  
> -	fwnode_handle_put(ref);
>  	return &rtd->sensor;
> -fail:
> -	fwnode_handle_put(ref);
> -	return ERR_PTR(ret);
>  }
>  
>  static struct ltc2983_sensor *
> @@ -921,7 +902,7 @@ ltc2983_thermistor_new(const struct fwnode_handle *child,
> struct ltc2983_data *s
>  {
>  	struct ltc2983_thermistor *thermistor;
>  	struct device *dev = &st->spi->dev;
> -	struct fwnode_handle *ref;
> +	struct fwnode_handle *ref __free(fwnode_handle) = NULL;
>  	u32 excitation_current = 0;
>  	int ret = 0;
>  
> @@ -938,7 +919,7 @@ ltc2983_thermistor_new(const struct fwnode_handle *child,
> struct ltc2983_data *s
>  	ret = fwnode_property_read_u32(ref, "reg", &thermistor-
> >r_sense_chan);
>  	if (ret) {
>  		dev_err(dev, "rsense channel must be configured...\n");
> -		goto fail;
> +		return ERR_PTR(ret);
>  	}
>  
>  	if (fwnode_property_read_bool(child, "adi,single-ended")) {
> @@ -958,8 +939,7 @@ ltc2983_thermistor_new(const struct fwnode_handle *child,
> struct ltc2983_data *s
>  		dev_err(&st->spi->dev,
>  			"Invalid chann:%d for differential thermistor",
>  			sensor->chan);
> -		ret = -EINVAL;
> -		goto fail;
> +		return ERR_PTR(-EINVAL);
>  	}
>  
>  	/* check custom sensor */
> @@ -978,10 +958,8 @@ ltc2983_thermistor_new(const struct fwnode_handle *child,
> struct ltc2983_data *s
>  								 propname,
>  								 steinhart,
>  								 64, false);
> -		if (IS_ERR(thermistor->custom)) {
> -			ret = PTR_ERR(thermistor->custom);
> -			goto fail;
> -		}
> +		if (IS_ERR(thermistor->custom))
> +			return ERR_CAST(thermistor->custom);
>  	}
>  	/* set common parameters */
>  	thermistor->sensor.fault_handler = ltc2983_common_fault_handler;
> @@ -1005,8 +983,7 @@ ltc2983_thermistor_new(const struct fwnode_handle *child,
> struct ltc2983_data *s
>  			    LTC2983_SENSOR_THERMISTOR_STEINHART) {
>  				dev_err(&st->spi->dev,
>  					"Auto Range not allowed for custom
> sensors\n");
> -				ret = -EINVAL;
> -				goto fail;
> +				return ERR_PTR(-EINVAL);
>  			}
>  			thermistor->excitation_current = 0x0c;
>  			break;
> @@ -1047,16 +1024,11 @@ ltc2983_thermistor_new(const struct fwnode_handle
> *child, struct ltc2983_data *s
>  			dev_err(&st->spi->dev,
>  				"Invalid value for excitation current(%u)",
>  				excitation_current);
> -			ret = -EINVAL;
> -			goto fail;
> +			return ERR_PTR(-EINVAL);
>  		}
>  	}
>  
> -	fwnode_handle_put(ref);
>  	return &thermistor->sensor;
> -fail:
> -	fwnode_handle_put(ref);
> -	return ERR_PTR(ret);
>  }
>  
>  static struct ltc2983_sensor *
diff mbox series

Patch

diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index fcb96c44d954..4357364e611e 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -656,7 +656,7 @@  ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data
 			 const struct ltc2983_sensor *sensor)
 {
 	struct ltc2983_thermocouple *thermo;
-	struct fwnode_handle *ref;
+	struct fwnode_handle *ref __free(fwnode_handle) = NULL;
 	u32 oc_current;
 	int ret;
 
@@ -714,7 +714,7 @@  ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data
 			 * the error right away.
 			 */
 			dev_err(&st->spi->dev, "Property reg must be given\n");
-			goto fail;
+			return ERR_PTR(ret);
 		}
 	}
 
@@ -725,22 +725,15 @@  ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data
 		thermo->custom = __ltc2983_custom_sensor_new(st, child,
 							     propname, false,
 							     16384, true);
-		if (IS_ERR(thermo->custom)) {
-			ret = PTR_ERR(thermo->custom);
-			goto fail;
-		}
+		if (IS_ERR(thermo->custom))
+			return ERR_CAST(thermo->custom);
 	}
 
 	/* set common parameters */
 	thermo->sensor.fault_handler = ltc2983_thermocouple_fault_handler;
 	thermo->sensor.assign_chan = ltc2983_thermocouple_assign_chan;
 
-	fwnode_handle_put(ref);
 	return &thermo->sensor;
-
-fail:
-	fwnode_handle_put(ref);
-	return ERR_PTR(ret);
 }
 
 static struct ltc2983_sensor *
@@ -750,7 +743,7 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 	struct ltc2983_rtd *rtd;
 	int ret = 0;
 	struct device *dev = &st->spi->dev;
-	struct fwnode_handle *ref;
+	struct fwnode_handle *ref __free(fwnode_handle) = NULL;
 	u32 excitation_current = 0, n_wires = 0;
 
 	rtd = devm_kzalloc(dev, sizeof(*rtd), GFP_KERNEL);
@@ -766,7 +759,7 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 	ret = fwnode_property_read_u32(ref, "reg", &rtd->r_sense_chan);
 	if (ret) {
 		dev_err(dev, "Property reg must be given\n");
-		goto fail;
+		return ERR_PTR(ret);
 	}
 
 	ret = fwnode_property_read_u32(child, "adi,number-of-wires", &n_wires);
@@ -787,8 +780,7 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 			break;
 		default:
 			dev_err(dev, "Invalid number of wires:%u\n", n_wires);
-			ret = -EINVAL;
-			goto fail;
+			return ERR_PTR(-EINVAL);
 		}
 	}
 
@@ -798,8 +790,7 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 			if (n_wires == 2 || n_wires == 3) {
 				dev_err(dev,
 					"Rotation not allowed for 2/3 Wire RTDs");
-				ret = -EINVAL;
-				goto fail;
+				return ERR_PTR(-EINVAL);
 			}
 			rtd->sensor_config |= LTC2983_RTD_C_ROTATE(1);
 		} else {
@@ -829,16 +820,14 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 				"Invalid rsense chann:%d to use in kelvin rsense",
 				rtd->r_sense_chan);
 
-			ret = -EINVAL;
-			goto fail;
+			return ERR_PTR(-EINVAL);
 		}
 
 		if (sensor->chan < min || sensor->chan > max) {
 			dev_err(dev, "Invalid chann:%d for the rtd config",
 				sensor->chan);
 
-			ret = -EINVAL;
-			goto fail;
+			return ERR_PTR(-EINVAL);
 		}
 	} else {
 		/* same as differential case */
@@ -846,8 +835,7 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 			dev_err(&st->spi->dev,
 				"Invalid chann:%d for RTD", sensor->chan);
 
-			ret = -EINVAL;
-			goto fail;
+			return ERR_PTR(-EINVAL);
 		}
 	}
 
@@ -856,10 +844,8 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 		rtd->custom = __ltc2983_custom_sensor_new(st, child,
 							  "adi,custom-rtd",
 							  false, 2048, false);
-		if (IS_ERR(rtd->custom)) {
-			ret = PTR_ERR(rtd->custom);
-			goto fail;
-		}
+		if (IS_ERR(rtd->custom))
+			return ERR_CAST(rtd->custom);
 	}
 
 	/* set common parameters */
@@ -901,18 +887,13 @@  ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 			dev_err(&st->spi->dev,
 				"Invalid value for excitation current(%u)",
 				excitation_current);
-			ret = -EINVAL;
-			goto fail;
+			return ERR_PTR(-EINVAL);
 		}
 	}
 
 	fwnode_property_read_u32(child, "adi,rtd-curve", &rtd->rtd_curve);
 
-	fwnode_handle_put(ref);
 	return &rtd->sensor;
-fail:
-	fwnode_handle_put(ref);
-	return ERR_PTR(ret);
 }
 
 static struct ltc2983_sensor *
@@ -921,7 +902,7 @@  ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
 {
 	struct ltc2983_thermistor *thermistor;
 	struct device *dev = &st->spi->dev;
-	struct fwnode_handle *ref;
+	struct fwnode_handle *ref __free(fwnode_handle) = NULL;
 	u32 excitation_current = 0;
 	int ret = 0;
 
@@ -938,7 +919,7 @@  ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
 	ret = fwnode_property_read_u32(ref, "reg", &thermistor->r_sense_chan);
 	if (ret) {
 		dev_err(dev, "rsense channel must be configured...\n");
-		goto fail;
+		return ERR_PTR(ret);
 	}
 
 	if (fwnode_property_read_bool(child, "adi,single-ended")) {
@@ -958,8 +939,7 @@  ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
 		dev_err(&st->spi->dev,
 			"Invalid chann:%d for differential thermistor",
 			sensor->chan);
-		ret = -EINVAL;
-		goto fail;
+		return ERR_PTR(-EINVAL);
 	}
 
 	/* check custom sensor */
@@ -978,10 +958,8 @@  ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
 								 propname,
 								 steinhart,
 								 64, false);
-		if (IS_ERR(thermistor->custom)) {
-			ret = PTR_ERR(thermistor->custom);
-			goto fail;
-		}
+		if (IS_ERR(thermistor->custom))
+			return ERR_CAST(thermistor->custom);
 	}
 	/* set common parameters */
 	thermistor->sensor.fault_handler = ltc2983_common_fault_handler;
@@ -1005,8 +983,7 @@  ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
 			    LTC2983_SENSOR_THERMISTOR_STEINHART) {
 				dev_err(&st->spi->dev,
 					"Auto Range not allowed for custom sensors\n");
-				ret = -EINVAL;
-				goto fail;
+				return ERR_PTR(-EINVAL);
 			}
 			thermistor->excitation_current = 0x0c;
 			break;
@@ -1047,16 +1024,11 @@  ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
 			dev_err(&st->spi->dev,
 				"Invalid value for excitation current(%u)",
 				excitation_current);
-			ret = -EINVAL;
-			goto fail;
+			return ERR_PTR(-EINVAL);
 		}
 	}
 
-	fwnode_handle_put(ref);
 	return &thermistor->sensor;
-fail:
-	fwnode_handle_put(ref);
-	return ERR_PTR(ret);
 }
 
 static struct ltc2983_sensor *