diff mbox series

[v1,1/1] gpiolib: Update the kernel documentation - add Return sections

Message ID 20240404212706.3587456-1-andriy.shevchenko@linux.intel.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series [v1,1/1] gpiolib: Update the kernel documentation - add Return sections | expand

Commit Message

Andy Shevchenko April 4, 2024, 9:27 p.m. UTC
$ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
67

Fix these by adding Return sections. While at it, make sure all of
Return sections use the same style.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c   |  22 +++--
 drivers/gpio/gpiolib-cdev.c   |   8 +-
 drivers/gpio/gpiolib-devres.c |  44 +++++++++-
 drivers/gpio/gpiolib-legacy.c |   3 +
 drivers/gpio/gpiolib-of.c     |  48 ++++++++---
 drivers/gpio/gpiolib-swnode.c |   4 +-
 drivers/gpio/gpiolib-sysfs.c  |   6 +-
 drivers/gpio/gpiolib.c        | 157 +++++++++++++++++++++++++++-------
 8 files changed, 233 insertions(+), 59 deletions(-)

Comments

Randy Dunlap April 5, 2024, 4:10 a.m. UTC | #1
Hi,

On 4/4/24 2:27 PM, Andy Shevchenko wrote:
> $ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
> 67
> 
> Fix these by adding Return sections. While at it, make sure all of
> Return sections use the same style.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/gpio/gpiolib-acpi.c   |  22 +++--
>  drivers/gpio/gpiolib-cdev.c   |   8 +-
>  drivers/gpio/gpiolib-devres.c |  44 +++++++++-
>  drivers/gpio/gpiolib-legacy.c |   3 +
>  drivers/gpio/gpiolib-of.c     |  48 ++++++++---
>  drivers/gpio/gpiolib-swnode.c |   4 +-
>  drivers/gpio/gpiolib-sysfs.c  |   6 +-
>  drivers/gpio/gpiolib.c        | 157 +++++++++++++++++++++++++++-------
>  8 files changed, 233 insertions(+), 59 deletions(-)


I would use %true, %false, %NULL, %0, and %1 in a few places.

s/error-code/error code/
or
s/error-code/errno/

I would s/active-low/active low/


or it can just be merged as is. It's a nice improvement.



Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>

Thanks.
Dan Carpenter April 5, 2024, 7:23 a.m. UTC | #2
On Thu, Apr 04, 2024 at 09:10:09PM -0700, Randy Dunlap wrote:
> 
> I would s/active-low/active low/

Active-low is the correct jargon in this case.

regards,
dan carpenter
Andy Shevchenko April 5, 2024, 3:27 p.m. UTC | #3
On Thu, Apr 04, 2024 at 09:10:09PM -0700, Randy Dunlap wrote:
> On 4/4/24 2:27 PM, Andy Shevchenko wrote:
> > $ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
> > 67
> > 
> > Fix these by adding Return sections. While at it, make sure all of
> > Return sections use the same style.

...

> I would use %true, %false, %NULL, %0, and %1 in a few places.

Why? I specifically removed % from all of them, it's not so useful.
Do we have, btw, generated HTML with these % as an example to see
the difference. Maybe that helps to understand this better?

> s/error-code/error code/
> or
> s/error-code/errno/
> 
> I would s/active-low/active low/
> 
> or it can just be merged as is. It's a nice improvement.

That's what I prefer as any of your comments may touch other parts of the
documentation and need to be aligned across all comments, which is out scope of
this patch.

> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
> Tested-by: Randy Dunlap <rdunlap@infradead.org>

Thank you!
Randy Dunlap April 5, 2024, 3:33 p.m. UTC | #4
Hi,

On 4/5/24 8:27 AM, Andy Shevchenko wrote:
> On Thu, Apr 04, 2024 at 09:10:09PM -0700, Randy Dunlap wrote:
>> On 4/4/24 2:27 PM, Andy Shevchenko wrote:
>>> $ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
>>> 67
>>>
>>> Fix these by adding Return sections. While at it, make sure all of
>>> Return sections use the same style.
> 
> ...
> 
>> I would use %true, %false, %NULL, %0, and %1 in a few places.
> 
> Why? I specifically removed % from all of them, it's not so useful.
> Do we have, btw, generated HTML with these % as an example to see
> the difference. Maybe that helps to understand this better?
> 

The leading '%' just changes the font style of constants.
I don't know of any HTML that compares them.

>> s/error-code/error code/
>> or
>> s/error-code/errno/
>>
>> I would s/active-low/active low/
>>
>> or it can just be merged as is. It's a nice improvement.
> 
> That's what I prefer as any of your comments may touch other parts of the
> documentation and need to be aligned across all comments, which is out scope of
> this patch.

My comments just refer to your patched lines.

> 
>> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
>> Tested-by: Randy Dunlap <rdunlap@infradead.org>
> 
> Thank you!
>
Andy Shevchenko April 5, 2024, 3:40 p.m. UTC | #5
On Fri, Apr 05, 2024 at 08:33:26AM -0700, Randy Dunlap wrote:
> On 4/5/24 8:27 AM, Andy Shevchenko wrote:
> > On Thu, Apr 04, 2024 at 09:10:09PM -0700, Randy Dunlap wrote:
> >> On 4/4/24 2:27 PM, Andy Shevchenko wrote:
> >>> $ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
> >>> 67
> >>>
> >>> Fix these by adding Return sections. While at it, make sure all of
> >>> Return sections use the same style.

...

> >> I would use %true, %false, %NULL, %0, and %1 in a few places.
> > 
> > Why? I specifically removed % from all of them, it's not so useful.
> > Do we have, btw, generated HTML with these % as an example to see
> > the difference. Maybe that helps to understand this better?
> 
> The leading '%' just changes the font style of constants.
> I don't know of any HTML that compares them.

I meant to compare the (HTML) render to see the difference, but you already
explained that it adds/modifies <font> tag or so.
Andy Shevchenko April 8, 2024, 6:21 p.m. UTC | #6
On Fri, Apr 05, 2024 at 12:27:06AM +0300, Andy Shevchenko wrote:
> $ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
> 67
> 
> Fix these by adding Return sections. While at it, make sure all of
> Return sections use the same style.

Bart, this is the biggest part from the v1, I would like to have that applied
first if no objections since it fixes kernel doc warnings. What do you think?
Andy Shevchenko April 8, 2024, 9:19 p.m. UTC | #7
On Mon, Apr 08, 2024 at 09:21:11PM +0300, Andy Shevchenko wrote:
> On Fri, Apr 05, 2024 at 12:27:06AM +0300, Andy Shevchenko wrote:
> > $ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
> > 67
> > 
> > Fix these by adding Return sections. While at it, make sure all of
> > Return sections use the same style.
> 
> Bart, this is the biggest part from the v1, I would like to have that applied
> first if no objections since it fixes kernel doc warnings. What do you think?

Hold on a sec, I found bigger issue that needs to be backported and this patch
needs to be rebased on top of it. I'll send an update.
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 7f140df40f35..9aac44f0816d 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -136,8 +136,12 @@  static int acpi_gpiochip_find(struct gpio_chip *gc, const void *data)
  * @path:	ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
  * @pin:	ACPI GPIO pin number (0-based, controller-relative)
  *
- * Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
- * error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO
+ * Returns:
+ * GPIO descriptor to use with Linux generic GPIO API.
+ * If the GPIO cannot be translated or there is an error an ERR_PTR is
+ * returned.
+ *
+ * Specifically returns -EPROBE_DEFER if the referenced GPIO
  * controller does not have GPIO chip registered at the moment. This is to
  * support probe deferral.
  */
@@ -207,6 +211,9 @@  EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource);
  *			       I/O resource or return False if not.
  * @ares:	Pointer to the ACPI resource to fetch
  * @agpio:	Pointer to a &struct acpi_resource_gpio to store the output pointer
+ *
+ * Returns:
+ * true if GpioIo resource is found, false otherwise.
  */
 bool acpi_gpio_get_io_resource(struct acpi_resource *ares,
 			       struct acpi_resource_gpio **agpio)
@@ -859,7 +866,9 @@  static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
  * that case @index is used to select the GPIO entry in the property value
  * (in case of multiple).
  *
- * If the GPIO cannot be translated or there is an error, an ERR_PTR is
+ * Returns:
+ * GPIO descriptor to use with Linux generic GPIO API.
+ * If the GPIO cannot be translated or there is an error an ERR_PTR is
  * returned.
  *
  * Note: if the GPIO resource has multiple entries in the pin list, this
@@ -910,6 +919,8 @@  static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
  * resource with the relevant information from a data-only ACPI firmware node
  * and uses that to obtain the GPIO descriptor to return.
  *
+ * Returns:
+ * GPIO descriptor to use with Linux generic GPIO API.
  * If the GPIO cannot be translated or there is an error an ERR_PTR is
  * returned.
  */
@@ -1023,7 +1034,8 @@  struct gpio_desc *acpi_find_gpio(struct fwnode_handle *fwnode,
  * The GPIO is considered wake capable if the GpioInt resource specifies
  * SharedAndWake or ExclusiveAndWake.
  *
- * Return: Linux IRQ number (> %0) on success, negative errno on failure.
+ * Returns:
+ * Linux IRQ number (> 0) on success, negative errno on failure.
  */
 int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name, int index,
 				  bool *wake_capable)
@@ -1406,7 +1418,7 @@  static int acpi_find_gpio_count(struct acpi_resource *ares, void *data)
  * @fwnode:	firmware node of the GPIO consumer
  * @con_id:	function within the GPIO consumer
  *
- * Return:
+ * Returns:
  * The number of GPIOs associated with a firmware node / function or %-ENOENT,
  * if no GPIO has been assigned to the requested function.
  */
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index fa9635610251..4cd0d5009406 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -2710,7 +2710,9 @@  static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
  * gpio_chrdev_open() - open the chardev for ioctl operations
  * @inode: inode for this chardev
  * @file: file struct for storing private data
- * Returns 0 on success
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 static int gpio_chrdev_open(struct inode *inode, struct file *file)
 {
@@ -2776,7 +2778,9 @@  static int gpio_chrdev_open(struct inode *inode, struct file *file)
  * gpio_chrdev_release() - close chardev after ioctl operations
  * @inode: inode for this chardev
  * @file: file struct for storing private data
- * Returns 0 on success
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 static int gpio_chrdev_release(struct inode *inode, struct file *file)
 {
diff --git a/drivers/gpio/gpiolib-devres.c b/drivers/gpio/gpiolib-devres.c
index 4987e62dcb3d..8a0371678ed2 100644
--- a/drivers/gpio/gpiolib-devres.c
+++ b/drivers/gpio/gpiolib-devres.c
@@ -52,6 +52,11 @@  static int devm_gpiod_match_array(struct device *dev, void *res, void *data)
  * Managed gpiod_get(). GPIO descriptors returned from this function are
  * automatically disposed on driver detach. See gpiod_get() for detailed
  * information about behavior and return values.
+ *
+ * Returns:
+ * The GPIO descriptor corresponding to the function @con_id of device
+ * dev, -ENOENT if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check devm_gpiod_get(struct device *dev,
 					      const char *con_id,
@@ -70,6 +75,11 @@  EXPORT_SYMBOL_GPL(devm_gpiod_get);
  * Managed gpiod_get_optional(). GPIO descriptors returned from this function
  * are automatically disposed on driver detach. See gpiod_get_optional() for
  * detailed information about behavior and return values.
+ *
+ * Returns:
+ * The GPIO descriptor corresponding to the function @con_id of device
+ * dev, NULL if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check devm_gpiod_get_optional(struct device *dev,
 						       const char *con_id,
@@ -89,6 +99,11 @@  EXPORT_SYMBOL_GPL(devm_gpiod_get_optional);
  * Managed gpiod_get_index(). GPIO descriptors returned from this function are
  * automatically disposed on driver detach. See gpiod_get_index() for detailed
  * information about behavior and return values.
+ *
+ * Returns:
+ * The GPIO descriptor corresponding to the function @con_id of device
+ * dev, -ENOENT if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev,
 						    const char *con_id,
@@ -141,8 +156,10 @@  EXPORT_SYMBOL_GPL(devm_gpiod_get_index);
  * GPIO descriptors returned from this function are automatically disposed on
  * driver detach.
  *
- * On successful request the GPIO pin is configured in accordance with
- * provided @flags.
+ * Returns:
+ * The GPIO descriptor corresponding to the function @con_id of device
+ * dev, -ENOENT if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *devm_fwnode_gpiod_get_index(struct device *dev,
 					      struct fwnode_handle *fwnode,
@@ -182,6 +199,11 @@  EXPORT_SYMBOL_GPL(devm_fwnode_gpiod_get_index);
  * function are automatically disposed on driver detach. See
  * gpiod_get_index_optional() for detailed information about behavior and
  * return values.
+ *
+ * Returns:
+ * The GPIO descriptor corresponding to the function @con_id of device
+ * dev, NULL if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check devm_gpiod_get_index_optional(struct device *dev,
 							     const char *con_id,
@@ -207,6 +229,12 @@  EXPORT_SYMBOL_GPL(devm_gpiod_get_index_optional);
  * Managed gpiod_get_array(). GPIO descriptors returned from this function are
  * automatically disposed on driver detach. See gpiod_get_array() for detailed
  * information about behavior and return values.
+ *
+ * Returns:
+ * The GPIO descriptors corresponding to the function @con_id of device
+ * dev, -ENOENT if no GPIO has been assigned to the requested function,
+ * or another IS_ERR() code if an error occurred while trying to acquire
+ * the GPIOs.
  */
 struct gpio_descs *__must_check devm_gpiod_get_array(struct device *dev,
 						     const char *con_id,
@@ -243,6 +271,12 @@  EXPORT_SYMBOL_GPL(devm_gpiod_get_array);
  * function are automatically disposed on driver detach.
  * See gpiod_get_array_optional() for detailed information about behavior and
  * return values.
+ *
+ * Returns:
+ * The GPIO descriptors corresponding to the function @con_id of device
+ * dev, NULL if no GPIO has been assigned to the requested function,
+ * or another IS_ERR() code if an error occurred while trying to acquire
+ * the GPIOs.
  */
 struct gpio_descs *__must_check
 devm_gpiod_get_array_optional(struct device *dev, const char *con_id,
@@ -337,6 +371,9 @@  static void devm_gpio_release(struct device *dev, void *res)
  *      same arguments and performs the same function as
  *      gpio_request().  GPIOs requested with this function will be
  *      automatically freed on driver detach.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int devm_gpio_request(struct device *dev, unsigned gpio, const char *label)
 {
@@ -366,6 +403,9 @@  EXPORT_SYMBOL_GPL(devm_gpio_request);
  *	@gpio:	the GPIO number
  *	@flags:	GPIO configuration as specified by GPIOF_*
  *	@label:	a literal description string of this GPIO
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int devm_gpio_request_one(struct device *dev, unsigned gpio,
 			  unsigned long flags, const char *label)
diff --git a/drivers/gpio/gpiolib-legacy.c b/drivers/gpio/gpiolib-legacy.c
index 5a9911ae9125..d27142418f9f 100644
--- a/drivers/gpio/gpiolib-legacy.c
+++ b/drivers/gpio/gpiolib-legacy.c
@@ -22,6 +22,9 @@  EXPORT_SYMBOL_GPL(gpio_free);
  * @label:	a literal description string of this GPIO
  *
  * **DEPRECATED** This function is deprecated and must not be used in new code.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
 {
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index cb0cefaec37e..a65f8cb323ea 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -46,16 +46,19 @@  enum of_gpio_flags {
  * @propname:	property name containing gpio specifier(s)
  *
  * The function returns the count of GPIOs specified for a node.
- * Note that the empty GPIO specifiers count too. Returns either
- *   Number of gpios defined in property,
- *   -EINVAL for an incorrectly formed gpios property, or
- *   -ENOENT for a missing gpios property
+ * NOTE: The empty GPIO specifiers count too.
  *
- * Example:
- * gpios = <0
- *          &gpio1 1 2
- *          0
- *          &gpio2 3 4>;
+ * Returns:
+ * Either number of GPIOs defined in the property, or
+ * *  -EINVAL for an incorrectly formed "gpios" property, or
+ * *  -ENOENT for a missing "gpios" property.
+ *
+ * Example::
+ *
+ *     gpios = <0
+ *              &gpio1 1 2
+ *              0
+ *              &gpio2 3 4>;
  *
  * The above example defines four GPIOs, two of which are not specified.
  * This function will return '4'
@@ -77,6 +80,11 @@  static int of_gpio_named_count(const struct device_node *np,
  * "gpios" for the chip select lines. If we detect this, we redirect
  * the counting of "cs-gpios" to count "gpios" transparent to the
  * driver.
+ *
+ * Returns:
+ * Either number of GPIOs defined in the property, or
+ * *  -EINVAL for an incorrectly formed "gpios" property, or
+ * *  -ENOENT for a missing "gpios" property.
  */
 static int of_gpio_spi_cs_get_count(const struct device_node *np,
 				    const char *con_id)
@@ -365,7 +373,8 @@  static void of_gpio_flags_quirks(const struct device_node *np,
  * @index:	index of the GPIO
  * @flags:	a flags pointer to fill in
  *
- * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
+ * Returns:
+ * GPIO descriptor to use with Linux GPIO API, or one of the errno
  * value on the error condition. If @flags is not NULL the function also fills
  * in flags for the GPIO.
  */
@@ -417,7 +426,8 @@  static struct gpio_desc *of_get_named_gpiod_flags(const struct device_node *np,
  *
  * **DEPRECATED** This function is deprecated and must not be used in new code.
  *
- * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * Returns:
+ * GPIO number to use with Linux generic GPIO API, or one of the errno
  * value on the error condition.
  */
 int of_get_named_gpio(const struct device_node *np, const char *propname,
@@ -712,7 +722,8 @@  struct gpio_desc *of_find_gpio(struct device_node *np, const char *con_id,
  *		of_find_gpio() or of_parse_own_gpio()
  * @dflags:	gpiod_flags - optional GPIO initialization flags
  *
- * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
+ * Returns:
+ * GPIO descriptor to use with Linux GPIO API, or one of the errno
  * value on the error condition.
  */
 static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
@@ -780,7 +791,8 @@  static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
  * @chip:	gpio chip to act on
  * @hog:	device node describing the hogs
  *
- * Returns error if it fails otherwise 0 on success.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog)
 {
@@ -814,7 +826,9 @@  static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog)
  *
  * This is only used by of_gpiochip_add to request/set GPIO initial
  * configuration.
- * It returns error if it fails otherwise 0 on success.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
 {
@@ -927,6 +941,9 @@  struct notifier_block gpio_of_notifier = {
  * This is simple translation function, suitable for the most 1:1 mapped
  * GPIO chips. This function performs only one sanity check: whether GPIO
  * is less than ngpios (that is specified in the gpio_chip).
+ *
+ * Returns:
+ * GPIO number (>= 0) on success, negative errno on failure.
  */
 static int of_gpio_simple_xlate(struct gpio_chip *gc,
 				const struct of_phandle_args *gpiospec,
@@ -976,6 +993,9 @@  static int of_gpio_simple_xlate(struct gpio_chip *gc,
  * If succeeded, this function will map bank's memory and will
  * do all necessary work for you. Then you'll able to use .regs
  * to manage GPIOs from the callbacks.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int of_mm_gpiochip_add_data(struct device_node *np,
 			    struct of_mm_gpio_chip *mm_gc,
diff --git a/drivers/gpio/gpiolib-swnode.c b/drivers/gpio/gpiolib-swnode.c
index fa52bdb1a29a..7298f1247dd3 100644
--- a/drivers/gpio/gpiolib-swnode.c
+++ b/drivers/gpio/gpiolib-swnode.c
@@ -96,8 +96,8 @@  struct gpio_desc *swnode_find_gpio(struct fwnode_handle *fwnode,
  *		system-global GPIOs
  * @con_id:	function within the GPIO consumer
  *
- * Return:
- * The number of GPIOs associated with a device / function or %-ENOENT,
+ * Returns:
+ * The number of GPIOs associated with a device / function or -ENOENT,
  * if no GPIO has been assigned to the requested function.
  */
 int swnode_gpio_count(const struct fwnode_handle *fwnode, const char *con_id)
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index 26202586fd39..17ed229412af 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -568,7 +568,8 @@  static struct class gpio_class = {
  * will see "direction" sysfs attribute which may be used to change
  * the gpio's direction.  A "value" attribute will always be provided.
  *
- * Returns zero on success, else an error.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 {
@@ -667,7 +668,8 @@  static int match_export(struct device *dev, const void *desc)
  * Set up a symlink from /sys/.../dev/name to /sys/class/gpio/gpioN
  * node. Caller is responsible for unlinking.
  *
- * Returns zero on success, else an error.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_export_link(struct device *dev, const char *name,
 		      struct gpio_desc *desc)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 468a19e5a7ac..bdd5a36859b6 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -213,6 +213,9 @@  EXPORT_SYMBOL_GPL(desc_to_gpio);
  * This function is unsafe and should not be used. Using the chip address
  * without taking the SRCU read lock may result in dereferencing a dangling
  * pointer.
+ *
+ * Returns:
+ * Address of the GPIO chip backing this device.
  */
 struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
 {
@@ -325,7 +328,8 @@  static int gpiochip_find_base_unlocked(u16 ngpio)
  * gpiod_get_direction - return the current direction of a GPIO
  * @desc:	GPIO to get the direction of
  *
- * Returns 0 for output, 1 for input, or an error code in case of error.
+ * Returns:
+ * 0 for output, 1 for input, or an error code in case of error.
  *
  * This function may sleep if gpiod_cansleep() is true.
  */
@@ -382,8 +386,8 @@  EXPORT_SYMBOL_GPL(gpiod_get_direction);
  * Add a new chip to the global chips list, keeping the list of chips sorted
  * by range(means [base, base + ngpio - 1]) order.
  *
- * Return -EBUSY if the new chip overlaps with some other chip's integer
- * space.
+ * Returns:
+ * -EBUSY if the new chip overlaps with some other chip's integer space.
  */
 static int gpiodev_add_to_list_unlocked(struct gpio_device *gdev)
 {
@@ -1503,6 +1507,9 @@  static unsigned int gpiochip_child_offset_to_irq_noop(struct gpio_chip *gc,
  * This function is a wrapper that calls gpiochip_lock_as_irq() and is to be
  * used as the activate function for the &struct irq_domain_ops. The host_data
  * for the IRQ domain must be the &struct gpio_chip.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 static int gpiochip_irq_domain_activate(struct irq_domain *domain,
 					struct irq_data *data, bool reserve)
@@ -1647,6 +1654,9 @@  static bool gpiochip_hierarchy_is_hierarchical(struct gpio_chip *gc)
  * This function will set up the mapping for a certain IRQ line on a
  * gpiochip by assigning the gpiochip as chip data, and using the irqchip
  * stored inside the gpiochip.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 static int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
 			    irq_hw_number_t hwirq)
@@ -1881,6 +1891,9 @@  static int gpiochip_irqchip_add_allocated_domain(struct gpio_chip *gc,
  * @gc: the GPIO chip to add the IRQ chip to
  * @lock_key: lockdep class for IRQ lock
  * @request_key: lockdep class for IRQ request
+ *
+ * Returns:
+ * 0 on success, or a negative error-code on failure.
  */
 static int gpiochip_add_irqchip(struct gpio_chip *gc,
 				struct lock_class_key *lock_key,
@@ -2016,6 +2029,9 @@  static void gpiochip_irqchip_remove(struct gpio_chip *gc)
  * @domain: the irqdomain to add to the gpiochip
  *
  * This function adds an IRQ domain to the gpiochip.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
 				struct irq_domain *domain)
@@ -2052,6 +2068,9 @@  static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
  * gpiochip_generic_request() - request the gpio function for a pin
  * @gc: the gpiochip owning the GPIO
  * @offset: the offset of the GPIO to request for GPIO function
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset)
 {
@@ -2085,6 +2104,9 @@  EXPORT_SYMBOL_GPL(gpiochip_generic_free);
  * @gc: the gpiochip owning the GPIO
  * @offset: the offset of the GPIO to apply the configuration
  * @config: the configuration to be applied
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiochip_generic_config(struct gpio_chip *gc, unsigned int offset,
 			    unsigned long config)
@@ -2111,6 +2133,9 @@  EXPORT_SYMBOL_GPL(gpiochip_generic_config);
  * pinctrl driver is DEPRECATED. Please see Section 2.1 of
  * Documentation/devicetree/bindings/gpio/gpio.txt on how to
  * bind pinctrl and gpio drivers via the "gpio-ranges" property.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiochip_add_pingroup_range(struct gpio_chip *gc,
 			struct pinctrl_dev *pctldev,
@@ -2162,13 +2187,13 @@  EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
  * @npins: the number of pins from the offset of each pin space (GPIO and
  *	pin controller) to accumulate in this range
  *
- * Returns:
- * 0 on success, or a negative error-code on failure.
- *
  * Calling this function directly from a DeviceTree-supported
  * pinctrl driver is DEPRECATED. Please see Section 2.1 of
  * Documentation/devicetree/bindings/gpio/gpio.txt on how to
  * bind pinctrl and gpio drivers via the "gpio-ranges" property.
+ *
+ * Returns:
+ * 0 on success, or a negative error-code on failure.
  */
 int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
 			   unsigned int gpio_offset, unsigned int pin_offset,
@@ -2572,7 +2597,8 @@  static int gpio_set_bias(struct gpio_desc *desc)
  * The function calls the certain GPIO driver to set debounce timeout
  * in the hardware.
  *
- * Returns 0 on success, or negative error code otherwise.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce)
 {
@@ -2588,7 +2614,8 @@  int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce)
  * Set the direction of the passed GPIO to input, such as gpiod_get_value() can
  * be called safely on it.
  *
- * Return 0 in case of success, else an error code.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_direction_input(struct gpio_desc *desc)
 {
@@ -2695,7 +2722,8 @@  static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
  * be called safely on it. The initial value of the output must be specified
  * as raw value on the physical line without regard for the ACTIVE_LOW status.
  *
- * Return 0 in case of success, else an error code.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 {
@@ -2714,7 +2742,8 @@  EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
  * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
  * account.
  *
- * Return 0 in case of success, else an error code.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_direction_output(struct gpio_desc *desc, int value)
 {
@@ -2787,7 +2816,8 @@  EXPORT_SYMBOL_GPL(gpiod_direction_output);
  * @desc: GPIO to enable.
  * @flags: Flags related to GPIO edge.
  *
- * Return 0 in case of success, else negative error code.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_enable_hw_timestamp_ns(struct gpio_desc *desc, unsigned long flags)
 {
@@ -2819,7 +2849,8 @@  EXPORT_SYMBOL_GPL(gpiod_enable_hw_timestamp_ns);
  * @desc: GPIO to disable.
  * @flags: Flags related to GPIO edge, same value as used during enable call.
  *
- * Return 0 in case of success, else negative error code.
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_disable_hw_timestamp_ns(struct gpio_desc *desc, unsigned long flags)
 {
@@ -2911,7 +2942,8 @@  int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
  * gpiod_is_active_low - test whether a GPIO is active-low or not
  * @desc: the gpio descriptor to test
  *
- * Returns 1 if the GPIO is active-low, 0 otherwise.
+ * Returns:
+ * 1 if the GPIO is active-low, 0 otherwise.
  */
 int gpiod_is_active_low(const struct gpio_desc *desc)
 {
@@ -3126,7 +3158,8 @@  int gpiod_get_array_value_complex(bool raw, bool can_sleep,
  * gpiod_get_raw_value() - return a gpio's raw value
  * @desc: gpio whose value will be returned
  *
- * Return the GPIO's raw value, i.e. the value of the physical line disregarding
+ * Returns:
+ * The GPIO's raw value, i.e. the value of the physical line disregarding
  * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function can be called from contexts where we cannot sleep, and will
@@ -3145,7 +3178,8 @@  EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
  * gpiod_get_value() - return a gpio's value
  * @desc: gpio whose value will be returned
  *
- * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
+ * Returns:
+ * The GPIO's logical value, i.e. taking the ACTIVE_LOW status into
  * account, or negative errno on failure.
  *
  * This function can be called from contexts where we cannot sleep, and will
@@ -3178,11 +3212,13 @@  EXPORT_SYMBOL_GPL(gpiod_get_value);
  * @value_bitmap: bitmap to store the read values
  *
  * Read the raw values of the GPIOs, i.e. the values of the physical lines
- * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
- * else an error code.
+ * without regard for their ACTIVE_LOW status.
  *
  * This function can be called from contexts where we cannot sleep,
  * and it will complain if the GPIO chip functions potentially sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_get_raw_array_value(unsigned int array_size,
 			      struct gpio_desc **desc_array,
@@ -3205,10 +3241,13 @@  EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
  * @value_bitmap: bitmap to store the read values
  *
  * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
- * into account.  Return 0 in case of success, else an error code.
+ * into account.
  *
  * This function can be called from contexts where we cannot sleep,
  * and it will complain if the GPIO chip functions potentially sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_get_array_value(unsigned int array_size,
 			  struct gpio_desc **desc_array,
@@ -3496,6 +3535,9 @@  EXPORT_SYMBOL_GPL(gpiod_set_value);
  *
  * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_set_raw_array_value(unsigned int array_size,
 			      struct gpio_desc **desc_array,
@@ -3521,6 +3563,9 @@  EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
  *
  * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_set_array_value(unsigned int array_size,
 			  struct gpio_desc **desc_array,
@@ -3539,6 +3584,8 @@  EXPORT_SYMBOL_GPL(gpiod_set_array_value);
  * gpiod_cansleep() - report whether gpio value access may sleep
  * @desc: gpio to check
  *
+ * Returns:
+ * 0 for non-sleepable, 1 for sleepable, or an error code in case of error.
  */
 int gpiod_cansleep(const struct gpio_desc *desc)
 {
@@ -3551,6 +3598,9 @@  EXPORT_SYMBOL_GPL(gpiod_cansleep);
  * gpiod_set_consumer_name() - set the consumer name for the descriptor
  * @desc: gpio to set the consumer name on
  * @name: the new consumer name
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name)
 {
@@ -3564,8 +3614,8 @@  EXPORT_SYMBOL_GPL(gpiod_set_consumer_name);
  * gpiod_to_irq() - return the IRQ corresponding to a GPIO
  * @desc: gpio whose IRQ will be returned (already requested)
  *
- * Return the IRQ corresponding to the passed GPIO, or an error code in case of
- * error.
+ * Returns:
+ * The IRQ corresponding to the passed GPIO, or an error code in case of error.
  */
 int gpiod_to_irq(const struct gpio_desc *desc)
 {
@@ -3619,6 +3669,9 @@  EXPORT_SYMBOL_GPL(gpiod_to_irq);
  *
  * This is used directly by GPIO drivers that want to lock down
  * a certain GPIO line to be used for IRQs.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiochip_lock_as_irq(struct gpio_chip *gc, unsigned int offset)
 {
@@ -3770,7 +3823,8 @@  EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
  * gpiod_get_raw_value_cansleep() - return a gpio's raw value
  * @desc: gpio whose value will be returned
  *
- * Return the GPIO's raw value, i.e. the value of the physical line disregarding
+ * Returns:
+ * The GPIO's raw value, i.e. the value of the physical line disregarding
  * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
@@ -3787,7 +3841,8 @@  EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
  * gpiod_get_value_cansleep() - return a gpio's value
  * @desc: gpio whose value will be returned
  *
- * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
+ * Returns:
+ * The GPIO's logical value, i.e. taking the ACTIVE_LOW status into
  * account, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
@@ -3817,10 +3872,12 @@  EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
  * @value_bitmap: bitmap to store the read values
  *
  * Read the raw values of the GPIOs, i.e. the values of the physical lines
- * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
- * else an error code.
+ * without regard for their ACTIVE_LOW status.
  *
  * This function is to be called from contexts that can sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
 				       struct gpio_desc **desc_array,
@@ -3844,9 +3901,12 @@  EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value_cansleep);
  * @value_bitmap: bitmap to store the read values
  *
  * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
- * into account.  Return 0 in case of success, else an error code.
+ * into account.
  *
  * This function is to be called from contexts that can sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_get_array_value_cansleep(unsigned int array_size,
 				   struct gpio_desc **desc_array,
@@ -3909,6 +3969,9 @@  EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
  * without regard for their ACTIVE_LOW status.
  *
  * This function is to be called from contexts that can sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 				       struct gpio_desc **desc_array,
@@ -3951,6 +4014,9 @@  void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n)
  * into account.
  *
  * This function is to be called from contexts that can sleep.
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_set_array_value_cansleep(unsigned int array_size,
 				   struct gpio_desc **desc_array,
@@ -4284,9 +4350,12 @@  EXPORT_SYMBOL_GPL(fwnode_gpiod_get_index);
 
 /**
  * gpiod_count - return the number of GPIOs associated with a device / function
- *		or -ENOENT if no GPIO has been assigned to the requested function
  * @dev:	GPIO consumer, can be NULL for system-global GPIOs
  * @con_id:	function within the GPIO consumer
+ *
+ * Returns:
+ * The number of GPIOs associated with a device / function or -ENOENT if no
+ * GPIO has been assigned to the requested function.
  */
 int gpiod_count(struct device *dev, const char *con_id)
 {
@@ -4313,7 +4382,8 @@  EXPORT_SYMBOL_GPL(gpiod_count);
  * @con_id:	function within the GPIO consumer
  * @flags:	optional GPIO initialization flags
  *
- * Return the GPIO descriptor corresponding to the function con_id of device
+ * Returns:
+ * The GPIO descriptor corresponding to the function @con_id of device
  * dev, -ENOENT if no GPIO has been assigned to the requested function, or
  * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
@@ -4333,6 +4403,11 @@  EXPORT_SYMBOL_GPL(gpiod_get);
  * This is equivalent to gpiod_get(), except that when no GPIO was assigned to
  * the requested function it will return NULL. This is convenient for drivers
  * that need to handle optional GPIOs.
+ *
+ * Returns:
+ * The GPIO descriptor corresponding to the function @con_id of device
+ * dev, NULL if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check gpiod_get_optional(struct device *dev,
 						  const char *con_id,
@@ -4351,7 +4426,8 @@  EXPORT_SYMBOL_GPL(gpiod_get_optional);
  *		of_find_gpio() or of_get_gpio_hog()
  * @dflags:	gpiod_flags - optional GPIO initialization flags
  *
- * Return 0 on success, -ENOENT if no GPIO has been assigned to the
+ * Returns:
+ * 0 on success, -ENOENT if no GPIO has been assigned to the
  * requested function and/or index, or another IS_ERR() code if an error
  * occurred while trying to acquire the GPIO.
  */
@@ -4426,7 +4502,8 @@  int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
  * This variant of gpiod_get() allows to access GPIOs other than the first
  * defined one for functions that define several GPIOs.
  *
- * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
+ * Returns:
+ * A valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
  * requested function and/or index, or another IS_ERR() code if an error
  * occurred while trying to acquire the GPIO.
  */
@@ -4454,6 +4531,11 @@  EXPORT_SYMBOL_GPL(gpiod_get_index);
  * This is equivalent to gpiod_get_index(), except that when no GPIO with the
  * specified index was assigned to the requested function it will return NULL.
  * This is convenient for drivers that need to handle optional GPIOs.
+ *
+ * Returns:
+ * A valid GPIO descriptor, NULL if no GPIO has been assigned to the
+ * requested function and/or index, or another IS_ERR() code if an error
+ * occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check gpiod_get_index_optional(struct device *dev,
 							const char *con_id,
@@ -4477,6 +4559,9 @@  EXPORT_SYMBOL_GPL(gpiod_get_index_optional);
  * @lflags:	bitmask of gpio_lookup_flags GPIO_* values - returned from
  *		of_find_gpio() or of_get_gpio_hog()
  * @dflags:	gpiod_flags - optional GPIO initialization flags
+ *
+ * Returns:
+ * 0 on success, or negative errno on failure.
  */
 int gpiod_hog(struct gpio_desc *desc, const char *name,
 	      unsigned long lflags, enum gpiod_flags dflags)
@@ -4533,9 +4618,11 @@  static void gpiochip_free_hogs(struct gpio_chip *gc)
  *
  * This function acquires all the GPIOs defined under a given function.
  *
- * Return a struct gpio_descs containing an array of descriptors, -ENOENT if
- * no GPIO has been assigned to the requested function, or another IS_ERR()
- * code if an error occurred while trying to acquire the GPIOs.
+ * Returns:
+ * The GPIO descriptors corresponding to the function @con_id of device
+ * dev, -ENOENT if no GPIO has been assigned to the requested function,
+ * or another IS_ERR() code if an error occurred while trying to acquire
+ * the GPIOs.
  */
 struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 						const char *con_id,
@@ -4661,6 +4748,12 @@  EXPORT_SYMBOL_GPL(gpiod_get_array);
  *
  * This is equivalent to gpiod_get_array(), except that when no GPIO was
  * assigned to the requested function it will return NULL.
+ *
+ * Returns:
+ * The GPIO descriptors corresponding to the function @con_id of device
+ * dev, NULL if no GPIO has been assigned to the requested function,
+ * or another IS_ERR() code if an error occurred while trying to acquire
+ * the GPIOs.
  */
 struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev,
 							const char *con_id,