diff mbox series

[v6,04/16] ACPI: processor: Move checks and availability of acpi_processor earlier

Message ID 20240417131909.7925-5-Jonathan.Cameron@huawei.com (mailing list archive)
State Superseded, archived
Headers show
Series ACPI/arm64: add support for virtual cpu hotplug | expand

Commit Message

Jonathan Cameron April 17, 2024, 1:18 p.m. UTC
Make the per_cpu(processors, cpu) entries available earlier so that
they are available in arch_register_cpu() as ARM64 will need access
to the acpi_handle to distinguish between acpi_processor_add()
and earlier registration attempts (which will fail as _STA cannot
be checked).

Reorder the remove flow to clear this per_cpu() after
arch_unregister_cpu() has completed, allowing it to be used in
there as well.

Note that on x86 for the CPU hotplug case, the pr->id prior to
acpi_map_cpu() may be invalid. Thus the per_cpu() structures
must be initialized after that call or after checking the ID
is valid (not hotplug path).

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
v6: As per discussion in v5 thread, don't use the cpu->dev and
    make this data available earlier by moving the assignment checks
    int acpi_processor_get_info().
---
 drivers/acpi/acpi_processor.c | 79 +++++++++++++++++++++--------------
 1 file changed, 47 insertions(+), 32 deletions(-)

Comments

Salil Mehta April 17, 2024, 3:08 p.m. UTC | #1
>  From: Jonathan Cameron <jonathan.cameron@huawei.com>
>  Sent: Wednesday, April 17, 2024 2:19 PM
>  
>  Make the per_cpu(processors, cpu) entries available earlier so that they are
>  available in arch_register_cpu() as ARM64 will need access to the
>  acpi_handle to distinguish between acpi_processor_add() and earlier
>  registration attempts (which will fail as _STA cannot be checked).
>  
>  Reorder the remove flow to clear this per_cpu() after
>  arch_unregister_cpu() has completed, allowing it to be used in there as
>  well.
>  
>  Note that on x86 for the CPU hotplug case, the pr->id prior to
>  acpi_map_cpu() may be invalid. Thus the per_cpu() structures must be
>  initialized after that call or after checking the ID is valid (not hotplug path).
>  
>  Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>  ---
>  v6: As per discussion in v5 thread, don't use the cpu->dev and
>      make this data available earlier by moving the assignment checks
>      int acpi_processor_get_info().
>  ---
>   drivers/acpi/acpi_processor.c | 79 +++++++++++++++++++++--------------
>   1 file changed, 47 insertions(+), 32 deletions(-)
>  
>  diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
>  index ba0a6f0ac841..2c164451ab53 100644
>  --- a/drivers/acpi/acpi_processor.c
>  +++ b/drivers/acpi/acpi_processor.c
>  @@ -184,7 +184,35 @@ static void __init acpi_pcc_cpufreq_init(void) {}
>  
>   /* Initialization */
>   #ifdef CONFIG_ACPI_HOTPLUG_CPU
>  -static int acpi_processor_hotadd_init(struct acpi_processor *pr)
>  +static DEFINE_PER_CPU(void *, processor_device_array);
>  +
>  +static void acpi_processor_set_per_cpu(struct acpi_processor *pr,
>  +				       struct acpi_device *device)
>  +{
>  +	BUG_ON(pr->id >= nr_cpu_ids);
>  +	/*
>  +	 * Buggy BIOS check.
>  +	 * ACPI id of processors can be reported wrongly by the BIOS.
>  +	 * Don't trust it blindly
>  +	 */
>  +	if (per_cpu(processor_device_array, pr->id) != NULL &&
>  +	    per_cpu(processor_device_array, pr->id) != device) {
>  +		dev_warn(&device->dev,
>  +			 "BIOS reported wrong ACPI id %d for the  processor\n",
>  +			 pr->id);
>  +		/* Give up, but do not abort the namespace scan. */
>  +		return;
>  +	}
>  +	/*
>  +	 * processor_device_array is not cleared on errors to allow buggy  BIOS
>  +	 * checks.
>  +	 */
>  +	per_cpu(processor_device_array, pr->id) = device;
>  +	per_cpu(processors, pr->id) = pr;
>  +}
>  +
>  +static int acpi_processor_hotadd_init(struct acpi_processor *pr,
>  +				      struct acpi_device *device)
>   {
>   	int ret;
>  
>  @@ -198,6 +226,8 @@ static int acpi_processor_hotadd_init(struct
>  acpi_processor *pr)
>   	if (ret)
>   		goto out;
>  
>  +	acpi_processor_set_per_cpu(pr, device);
>  +
>   	ret = arch_register_cpu(pr->id);
>   	if (ret) {
>   		acpi_unmap_cpu(pr->id);
>  @@ -217,7 +247,8 @@ static int acpi_processor_hotadd_init(struct
>  acpi_processor *pr)
>   	return ret;
>   }
>   #else
>  -static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
>  +static inline int acpi_processor_hotadd_init(struct acpi_processor *pr,
>  +					     struct acpi_device *device)
>   {
>   	return -ENODEV;
>   }
>  @@ -232,6 +263,7 @@ static int acpi_processor_get_info(struct acpi_device
>  *device)
>   	acpi_status status = AE_OK;
>   	static int cpu0_initialized;
>   	unsigned long long value;
>  +	int ret;
>  
>   	acpi_processor_errata();
>  
>  @@ -316,10 +348,12 @@ static int acpi_processor_get_info(struct
>  acpi_device *device)
>   	 *  because cpuid <-> apicid mapping is persistent now.
>   	 */
>   	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) {
>  -		int ret = acpi_processor_hotadd_init(pr);
>  +		ret = acpi_processor_hotadd_init(pr, device);
>  
>   		if (ret)
>  -			return ret;
>  +			goto err;
>  +	} else {
>  +		acpi_processor_set_per_cpu(pr, device);
>   	}
>  
>   	/*
>  @@ -357,6 +391,10 @@ static int acpi_processor_get_info(struct
>  acpi_device *device)
>   		arch_fix_phys_package_id(pr->id, value);
>  
>   	return 0;
>  +
>  +err:
>  +	per_cpu(processors, pr->id) = NULL;
>  +	return ret;
>   }
>  
>   /*
>  @@ -365,8 +403,6 @@ static int acpi_processor_get_info(struct acpi_device
>  *device)
>    * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc.
>    * Such things have to be put in and set up by the processor driver's
>  .probe().
>    */
>  -static DEFINE_PER_CPU(void *, processor_device_array);
>  -
>   static int acpi_processor_add(struct acpi_device *device,
>   					const struct acpi_device_id *id)
>   {
>  @@ -395,28 +431,6 @@ static int acpi_processor_add(struct acpi_device
>  *device,
>   	if (result) /* Processor is not physically present or unavailable */
>   		return 0;
>  
>  -	BUG_ON(pr->id >= nr_cpu_ids);
>  -
>  -	/*
>  -	 * Buggy BIOS check.
>  -	 * ACPI id of processors can be reported wrongly by the BIOS.
>  -	 * Don't trust it blindly
>  -	 */
>  -	if (per_cpu(processor_device_array, pr->id) != NULL &&
>  -	    per_cpu(processor_device_array, pr->id) != device) {
>  -		dev_warn(&device->dev,
>  -			"BIOS reported wrong ACPI id %d for the  processor\n",
>  -			pr->id);
>  -		/* Give up, but do not abort the namespace scan. */
>  -		goto err;
>  -	}
>  -	/*
>  -	 * processor_device_array is not cleared on errors to allow buggy  BIOS
>  -	 * checks.
>  -	 */
>  -	per_cpu(processor_device_array, pr->id) = device;
>  -	per_cpu(processors, pr->id) = pr;
>  -
>   	dev = get_cpu_device(pr->id);
>   	if (!dev) {
>   		result = -ENODEV;
>  @@ -469,15 +483,16 @@ static void acpi_processor_remove(struct
>  acpi_device *device)
>   	device_release_driver(pr->dev);
>   	acpi_unbind_one(pr->dev);
>  
>  -	/* Clean up. */
>  -	per_cpu(processor_device_array, pr->id) = NULL;
>  -	per_cpu(processors, pr->id) = NULL;
>  -
>   	cpu_maps_update_begin();
>   	cpus_write_lock();
>  
>   	/* Remove the CPU. */
>   	arch_unregister_cpu(pr->id);
>  +
>  +	/* Clean up. */
>  +	per_cpu(processor_device_array, pr->id) = NULL;
>  +	per_cpu(processors, pr->id) = NULL;
>  +


Shouldn't above change come after acpi_unmap_cpu() i.e. after next line?


>   	acpi_unmap_cpu(pr->id);
>  
>   	cpus_write_unlock();
>  --
>  2.39.2
Jonathan Cameron April 17, 2024, 3:19 p.m. UTC | #2
> >   		result = -ENODEV;
> >  @@ -469,15 +483,16 @@ static void acpi_processor_remove(struct
> >  acpi_device *device)
> >   	device_release_driver(pr->dev);
> >   	acpi_unbind_one(pr->dev);
> >  
> >  -	/* Clean up. */
> >  -	per_cpu(processor_device_array, pr->id) = NULL;
> >  -	per_cpu(processors, pr->id) = NULL;
> >  -
> >   	cpu_maps_update_begin();
> >   	cpus_write_lock();
> >  
> >   	/* Remove the CPU. */
> >   	arch_unregister_cpu(pr->id);
> >  +
> >  +	/* Clean up. */
> >  +	per_cpu(processor_device_array, pr->id) = NULL;
> >  +	per_cpu(processors, pr->id) = NULL;
> >  +  
> 
> 
> Shouldn't above change come after acpi_unmap_cpu() i.e. after next line?
> 
> 
> >   	acpi_unmap_cpu(pr->id);
Agreed - that is more logically correct.  I'll move it for v7.

Thanks,

Jonathan
Jonathan Cameron April 18, 2024, 8:16 a.m. UTC | #3
On Wed, 17 Apr 2024 14:18:57 +0100
Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:

> Make the per_cpu(processors, cpu) entries available earlier so that
> they are available in arch_register_cpu() as ARM64 will need access
> to the acpi_handle to distinguish between acpi_processor_add()
> and earlier registration attempts (which will fail as _STA cannot
> be checked).
> 
> Reorder the remove flow to clear this per_cpu() after
> arch_unregister_cpu() has completed, allowing it to be used in
> there as well.
> 
> Note that on x86 for the CPU hotplug case, the pr->id prior to
> acpi_map_cpu() may be invalid. Thus the per_cpu() structures
> must be initialized after that call or after checking the ID
> is valid (not hotplug path).
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> v6: As per discussion in v5 thread, don't use the cpu->dev and
>     make this data available earlier by moving the assignment checks
>     int acpi_processor_get_info().
> ---
>  drivers/acpi/acpi_processor.c | 79 +++++++++++++++++++++--------------
>  1 file changed, 47 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index ba0a6f0ac841..2c164451ab53 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -184,7 +184,35 @@ static void __init acpi_pcc_cpufreq_init(void) {}
>  
>  /* Initialization */
>  #ifdef CONFIG_ACPI_HOTPLUG_CPU
Note I messed up a rebase here.  This ifdef should come after the new function
(see later)

Will fix for v7.
> -static int acpi_processor_hotadd_init(struct acpi_processor *pr)
> +static DEFINE_PER_CPU(void *, processor_device_array);
> +
> +static void acpi_processor_set_per_cpu(struct acpi_processor *pr,
> +				       struct acpi_device *device)
> +{
> +	BUG_ON(pr->id >= nr_cpu_ids);
> +	/*
> +	 * Buggy BIOS check.
> +	 * ACPI id of processors can be reported wrongly by the BIOS.
> +	 * Don't trust it blindly
> +	 */
> +	if (per_cpu(processor_device_array, pr->id) != NULL &&
> +	    per_cpu(processor_device_array, pr->id) != device) {
> +		dev_warn(&device->dev,
> +			 "BIOS reported wrong ACPI id %d for the processor\n",
> +			 pr->id);
> +		/* Give up, but do not abort the namespace scan. */
> +		return;
> +	}
> +	/*
> +	 * processor_device_array is not cleared on errors to allow buggy BIOS
> +	 * checks.
> +	 */
> +	per_cpu(processor_device_array, pr->id) = device;
> +	per_cpu(processors, pr->id) = pr;
> +}
> +

The ifdef should be here as...

> +static int acpi_processor_hotadd_init(struct acpi_processor *pr,
> +				      struct acpi_device *device)
>  {
>  	int ret;
>  
> @@ -198,6 +226,8 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
>  	if (ret)
>  		goto out;
>  
> +	acpi_processor_set_per_cpu(pr, device);
> +
>  	ret = arch_register_cpu(pr->id);
>  	if (ret) {
>  		acpi_unmap_cpu(pr->id);
> @@ -217,7 +247,8 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
>  	return ret;
>  }
>  #else
> -static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
> +static inline int acpi_processor_hotadd_init(struct acpi_processor *pr,
> +					     struct acpi_device *device)
>  {
>  	return -ENODEV;
>  }
> @@ -232,6 +263,7 @@ static int acpi_processor_get_info(struct acpi_device *device)
>  	acpi_status status = AE_OK;
>  	static int cpu0_initialized;
>  	unsigned long long value;
> +	int ret;
>  
>  	acpi_processor_errata();
>  
> @@ -316,10 +348,12 @@ static int acpi_processor_get_info(struct acpi_device *device)
>  	 *  because cpuid <-> apicid mapping is persistent now.
>  	 */
>  	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) {
> -		int ret = acpi_processor_hotadd_init(pr);
> +		ret = acpi_processor_hotadd_init(pr, device);
>  
>  		if (ret)
> -			return ret;
> +			goto err;
> +	} else {
> +		acpi_processor_set_per_cpu(pr, device);

This is not covered by CONFIG_ACPI_HOTPLUG_CPU

>  	}
diff mbox series

Patch

diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index ba0a6f0ac841..2c164451ab53 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -184,7 +184,35 @@  static void __init acpi_pcc_cpufreq_init(void) {}
 
 /* Initialization */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
-static int acpi_processor_hotadd_init(struct acpi_processor *pr)
+static DEFINE_PER_CPU(void *, processor_device_array);
+
+static void acpi_processor_set_per_cpu(struct acpi_processor *pr,
+				       struct acpi_device *device)
+{
+	BUG_ON(pr->id >= nr_cpu_ids);
+	/*
+	 * Buggy BIOS check.
+	 * ACPI id of processors can be reported wrongly by the BIOS.
+	 * Don't trust it blindly
+	 */
+	if (per_cpu(processor_device_array, pr->id) != NULL &&
+	    per_cpu(processor_device_array, pr->id) != device) {
+		dev_warn(&device->dev,
+			 "BIOS reported wrong ACPI id %d for the processor\n",
+			 pr->id);
+		/* Give up, but do not abort the namespace scan. */
+		return;
+	}
+	/*
+	 * processor_device_array is not cleared on errors to allow buggy BIOS
+	 * checks.
+	 */
+	per_cpu(processor_device_array, pr->id) = device;
+	per_cpu(processors, pr->id) = pr;
+}
+
+static int acpi_processor_hotadd_init(struct acpi_processor *pr,
+				      struct acpi_device *device)
 {
 	int ret;
 
@@ -198,6 +226,8 @@  static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	if (ret)
 		goto out;
 
+	acpi_processor_set_per_cpu(pr, device);
+
 	ret = arch_register_cpu(pr->id);
 	if (ret) {
 		acpi_unmap_cpu(pr->id);
@@ -217,7 +247,8 @@  static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	return ret;
 }
 #else
-static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
+static inline int acpi_processor_hotadd_init(struct acpi_processor *pr,
+					     struct acpi_device *device)
 {
 	return -ENODEV;
 }
@@ -232,6 +263,7 @@  static int acpi_processor_get_info(struct acpi_device *device)
 	acpi_status status = AE_OK;
 	static int cpu0_initialized;
 	unsigned long long value;
+	int ret;
 
 	acpi_processor_errata();
 
@@ -316,10 +348,12 @@  static int acpi_processor_get_info(struct acpi_device *device)
 	 *  because cpuid <-> apicid mapping is persistent now.
 	 */
 	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) {
-		int ret = acpi_processor_hotadd_init(pr);
+		ret = acpi_processor_hotadd_init(pr, device);
 
 		if (ret)
-			return ret;
+			goto err;
+	} else {
+		acpi_processor_set_per_cpu(pr, device);
 	}
 
 	/*
@@ -357,6 +391,10 @@  static int acpi_processor_get_info(struct acpi_device *device)
 		arch_fix_phys_package_id(pr->id, value);
 
 	return 0;
+
+err:
+	per_cpu(processors, pr->id) = NULL;
+	return ret;
 }
 
 /*
@@ -365,8 +403,6 @@  static int acpi_processor_get_info(struct acpi_device *device)
  * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc.
  * Such things have to be put in and set up by the processor driver's .probe().
  */
-static DEFINE_PER_CPU(void *, processor_device_array);
-
 static int acpi_processor_add(struct acpi_device *device,
 					const struct acpi_device_id *id)
 {
@@ -395,28 +431,6 @@  static int acpi_processor_add(struct acpi_device *device,
 	if (result) /* Processor is not physically present or unavailable */
 		return 0;
 
-	BUG_ON(pr->id >= nr_cpu_ids);
-
-	/*
-	 * Buggy BIOS check.
-	 * ACPI id of processors can be reported wrongly by the BIOS.
-	 * Don't trust it blindly
-	 */
-	if (per_cpu(processor_device_array, pr->id) != NULL &&
-	    per_cpu(processor_device_array, pr->id) != device) {
-		dev_warn(&device->dev,
-			"BIOS reported wrong ACPI id %d for the processor\n",
-			pr->id);
-		/* Give up, but do not abort the namespace scan. */
-		goto err;
-	}
-	/*
-	 * processor_device_array is not cleared on errors to allow buggy BIOS
-	 * checks.
-	 */
-	per_cpu(processor_device_array, pr->id) = device;
-	per_cpu(processors, pr->id) = pr;
-
 	dev = get_cpu_device(pr->id);
 	if (!dev) {
 		result = -ENODEV;
@@ -469,15 +483,16 @@  static void acpi_processor_remove(struct acpi_device *device)
 	device_release_driver(pr->dev);
 	acpi_unbind_one(pr->dev);
 
-	/* Clean up. */
-	per_cpu(processor_device_array, pr->id) = NULL;
-	per_cpu(processors, pr->id) = NULL;
-
 	cpu_maps_update_begin();
 	cpus_write_lock();
 
 	/* Remove the CPU. */
 	arch_unregister_cpu(pr->id);
+
+	/* Clean up. */
+	per_cpu(processor_device_array, pr->id) = NULL;
+	per_cpu(processors, pr->id) = NULL;
+
 	acpi_unmap_cpu(pr->id);
 
 	cpus_write_unlock();