diff mbox series

[15/17] mm: make numa_memblks more self-contained

Message ID 20240716111346.3676969-16-rppt@kernel.org (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series mm: introduce numa_memblks | expand

Commit Message

Mike Rapoport July 16, 2024, 11:13 a.m. UTC
From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Introduce numa_memblks_init() and move some code around to avoid several
global variables in numa_memblks.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/x86/mm/numa.c           | 53 ++++---------------------
 include/linux/numa_memblks.h |  9 +----
 mm/numa_memblks.c            | 77 +++++++++++++++++++++++++++---------
 3 files changed, 68 insertions(+), 71 deletions(-)

Comments

Jonathan Cameron July 19, 2024, 6:07 p.m. UTC | #1
On Tue, 16 Jul 2024 14:13:44 +0300
Mike Rapoport <rppt@kernel.org> wrote:

> From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
> 
> Introduce numa_memblks_init() and move some code around to avoid several
> global variables in numa_memblks.

Hi Mike,

Adding the effectively always on memblock_force_top_down
deserves a comment on why. I assume because you are going to do
something with it later? 

There also seems to be more going on in here such as the change to
get_pfn_range_for_nid()  Perhaps break this up so each
change can have an explanation. 


> 
> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
> ---
>  arch/x86/mm/numa.c           | 53 ++++---------------------
>  include/linux/numa_memblks.h |  9 +----
>  mm/numa_memblks.c            | 77 +++++++++++++++++++++++++++---------
>  3 files changed, 68 insertions(+), 71 deletions(-)
> 
> diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
> index 3848e68d771a..16bc703c9272 100644
> --- a/arch/x86/mm/numa.c
> +++ b/arch/x86/mm/numa.c
> @@ -115,30 +115,19 @@ void __init setup_node_to_cpumask_map(void)
>  	pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
>  }
>  
> -static int __init numa_register_memblks(struct numa_meminfo *mi)
> +static int __init numa_register_nodes(void)
>  {
> -	int i, nid, err;
> -
> -	err = numa_register_meminfo(mi);
> -	if (err)
> -		return err;
> +	int nid;
>  
>  	if (!memblock_validate_numa_coverage(SZ_1M))
>  		return -EINVAL;
>  
>  	/* Finally register nodes. */
>  	for_each_node_mask(nid, node_possible_map) {
> -		u64 start = PFN_PHYS(max_pfn);
> -		u64 end = 0;
> -
> -		for (i = 0; i < mi->nr_blks; i++) {
> -			if (nid != mi->blk[i].nid)
> -				continue;
> -			start = min(mi->blk[i].start, start);
> -			end = max(mi->blk[i].end, end);
> -		}
> +		unsigned long start_pfn, end_pfn;
>  
> -		if (start >= end)
> +		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);

It's not immediately obvious to me that this code is equivalent so I'd
prefer it in a separate patch with some description of why
it is a valid change.

> +		if (start_pfn >= end_pfn)
>  			continue;
>  
>  		alloc_node_data(nid);
> @@ -178,39 +167,11 @@ static int __init numa_init(int (*init_func)(void))
>  	for (i = 0; i < MAX_LOCAL_APIC; i++)
>  		set_apicid_to_node(i, NUMA_NO_NODE);
>  
> -	nodes_clear(numa_nodes_parsed);
> -	nodes_clear(node_possible_map);
> -	nodes_clear(node_online_map);
> -	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
> -	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
> -				  NUMA_NO_NODE));
> -	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
> -				  NUMA_NO_NODE));
> -	/* In case that parsing SRAT failed. */
> -	WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
> -	numa_reset_distance();
> -
> -	ret = init_func();
> -	if (ret < 0)
> -		return ret;
> -
> -	/*
> -	 * We reset memblock back to the top-down direction
> -	 * here because if we configured ACPI_NUMA, we have
> -	 * parsed SRAT in init_func(). It is ok to have the
> -	 * reset here even if we did't configure ACPI_NUMA
> -	 * or acpi numa init fails and fallbacks to dummy
> -	 * numa init.
> -	 */
> -	memblock_set_bottom_up(false);
> -
> -	ret = numa_cleanup_meminfo(&numa_meminfo);
> +	ret = numa_memblks_init(init_func, /* memblock_force_top_down */ true);
The comment in parameter list seems unnecessary.
Maybe add a comment above the call instead if need to call that out?

>  	if (ret < 0)
>  		return ret;
>  
> -	numa_emulation(&numa_meminfo, numa_distance_cnt);
> -
> -	ret = numa_register_memblks(&numa_meminfo);
> +	ret = numa_register_nodes();
>  	if (ret < 0)
>  		return ret;
>  

> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
> index e0039549aaac..640f3a3ce0ee 100644
> --- a/mm/numa_memblks.c
> +++ b/mm/numa_memblks.c
> @@ -7,13 +7,27 @@
>  #include <linux/numa.h>
>  #include <linux/numa_memblks.h>
>  

> +/*
> + * Set nodes, which have memory in @mi, in *@nodemask.
> + */
> +static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
> +					      const struct numa_meminfo *mi)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
> +		if (mi->blk[i].start != mi->blk[i].end &&
> +		    mi->blk[i].nid != NUMA_NO_NODE)
> +			node_set(mi->blk[i].nid, *nodemask);
> +}

The code move doesn't have an obvious purpose. Maybe call that
out in the patch description if it is needed for a future patch.
Or do it in two goes so first just adds the static, 2nd shuffles
the code.

>  
>  /**
>   * numa_reset_distance - Reset NUMA distance table
> @@ -287,20 +301,6 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
>  	return 0;
>  }
>  
> -/*
> - * Set nodes, which have memory in @mi, in *@nodemask.
> - */
> -void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
> -				       const struct numa_meminfo *mi)
> -{
> -	int i;
> -
> -	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
> -		if (mi->blk[i].start != mi->blk[i].end &&
> -		    mi->blk[i].nid != NUMA_NO_NODE)
> -			node_set(mi->blk[i].nid, *nodemask);
> -}
> -
>  /*
>   * Mark all currently memblock-reserved physical memory (which covers the
>   * kernel's own memory ranges) as hot-unswappable.
> @@ -368,7 +368,7 @@ static void __init numa_clear_kernel_node_hotplug(void)
>  	}
>  }
>  
> -int __init numa_register_meminfo(struct numa_meminfo *mi)
> +static int __init numa_register_meminfo(struct numa_meminfo *mi)
>  {
>  	int i;
>  
> @@ -412,6 +412,47 @@ int __init numa_register_meminfo(struct numa_meminfo *mi)
>  	return 0;
>  }
>  
> +int __init numa_memblks_init(int (*init_func)(void),
> +			     bool memblock_force_top_down)
> +{
> +	int ret;
> +
> +	nodes_clear(numa_nodes_parsed);
> +	nodes_clear(node_possible_map);
> +	nodes_clear(node_online_map);
> +	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
> +	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
> +				  NUMA_NO_NODE));
> +	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
> +				  NUMA_NO_NODE));
> +	/* In case that parsing SRAT failed. */
> +	WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
> +	numa_reset_distance();
> +
> +	ret = init_func();
> +	if (ret < 0)
> +		return ret;
> +
> +	/*
> +	 * We reset memblock back to the top-down direction
> +	 * here because if we configured ACPI_NUMA, we have
> +	 * parsed SRAT in init_func(). It is ok to have the
> +	 * reset here even if we did't configure ACPI_NUMA
> +	 * or acpi numa init fails and fallbacks to dummy
> +	 * numa init.
> +	 */
> +	if (memblock_force_top_down)
> +		memblock_set_bottom_up(false);
> +
> +	ret = numa_cleanup_meminfo(&numa_meminfo);
> +	if (ret < 0)
> +		return ret;
> +
> +	numa_emulation(&numa_meminfo, numa_distance_cnt);
> +
> +	return numa_register_meminfo(&numa_meminfo);
> +}
> +
>  static int __init cmp_memblk(const void *a, const void *b)
>  {
>  	const struct numa_memblk *ma = *(const struct numa_memblk **)a;
Mike Rapoport July 20, 2024, 12:32 p.m. UTC | #2
On Fri, Jul 19, 2024 at 07:07:12PM +0100, Jonathan Cameron wrote:
> On Tue, 16 Jul 2024 14:13:44 +0300
> Mike Rapoport <rppt@kernel.org> wrote:
> 
> > From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
> > 
> > Introduce numa_memblks_init() and move some code around to avoid several
> > global variables in numa_memblks.
> 
> Hi Mike,
> 
> Adding the effectively always on memblock_force_top_down
> deserves a comment on why. I assume because you are going to do
> something with it later? 

Yes, arch_numa sets it to false. I'll add a note in the changelog.

> There also seems to be more going on in here such as the change to
> get_pfn_range_for_nid()  Perhaps break this up so each
> change can have an explanation. 
 
Ok.
 
> > 
> > Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
> > ---
> >  arch/x86/mm/numa.c           | 53 ++++---------------------
> >  include/linux/numa_memblks.h |  9 +----
> >  mm/numa_memblks.c            | 77 +++++++++++++++++++++++++++---------
> >  3 files changed, 68 insertions(+), 71 deletions(-)
> > 
> > diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
> > index 3848e68d771a..16bc703c9272 100644
> > --- a/arch/x86/mm/numa.c
> > +++ b/arch/x86/mm/numa.c
> > @@ -115,30 +115,19 @@ void __init setup_node_to_cpumask_map(void)
> >  	pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
> >  }
> >  
> > -static int __init numa_register_memblks(struct numa_meminfo *mi)
> > +static int __init numa_register_nodes(void)
> >  {
> > -	int i, nid, err;
> > -
> > -	err = numa_register_meminfo(mi);
> > -	if (err)
> > -		return err;
> > +	int nid;
> >  
> >  	if (!memblock_validate_numa_coverage(SZ_1M))
> >  		return -EINVAL;
> >  
> >  	/* Finally register nodes. */
> >  	for_each_node_mask(nid, node_possible_map) {
> > -		u64 start = PFN_PHYS(max_pfn);
> > -		u64 end = 0;
> > -
> > -		for (i = 0; i < mi->nr_blks; i++) {
> > -			if (nid != mi->blk[i].nid)
> > -				continue;
> > -			start = min(mi->blk[i].start, start);
> > -			end = max(mi->blk[i].end, end);
> > -		}
> > +		unsigned long start_pfn, end_pfn;
> >  
> > -		if (start >= end)
> > +		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
> 
> It's not immediately obvious to me that this code is equivalent so I'd
> prefer it in a separate patch with some description of why
> it is a valid change.

Will do.
 
> > +		if (start_pfn >= end_pfn)
> >  			continue;
> >  
> >  		alloc_node_data(nid);
> > @@ -178,39 +167,11 @@ static int __init numa_init(int (*init_func)(void))
> >  	for (i = 0; i < MAX_LOCAL_APIC; i++)
> >  		set_apicid_to_node(i, NUMA_NO_NODE);
> >  
> > -	nodes_clear(numa_nodes_parsed);
> > -	nodes_clear(node_possible_map);
> > -	nodes_clear(node_online_map);
> > -	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
> > -	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
> > -				  NUMA_NO_NODE));
> > -	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
> > -				  NUMA_NO_NODE));
> > -	/* In case that parsing SRAT failed. */
> > -	WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
> > -	numa_reset_distance();
> > -
> > -	ret = init_func();
> > -	if (ret < 0)
> > -		return ret;
> > -
> > -	/*
> > -	 * We reset memblock back to the top-down direction
> > -	 * here because if we configured ACPI_NUMA, we have
> > -	 * parsed SRAT in init_func(). It is ok to have the
> > -	 * reset here even if we did't configure ACPI_NUMA
> > -	 * or acpi numa init fails and fallbacks to dummy
> > -	 * numa init.
> > -	 */
> > -	memblock_set_bottom_up(false);
> > -
> > -	ret = numa_cleanup_meminfo(&numa_meminfo);
> > +	ret = numa_memblks_init(init_func, /* memblock_force_top_down */ true);
> The comment in parameter list seems unnecessary.
> Maybe add a comment above the call instead if need to call that out?

I'll drop it for now.
 
> >  	if (ret < 0)
> >  		return ret;
> >  
> > -	numa_emulation(&numa_meminfo, numa_distance_cnt);
> > -
> > -	ret = numa_register_memblks(&numa_meminfo);
> > +	ret = numa_register_nodes();
> >  	if (ret < 0)
> >  		return ret;
> >  
> 
> > diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
> > index e0039549aaac..640f3a3ce0ee 100644
> > --- a/mm/numa_memblks.c
> > +++ b/mm/numa_memblks.c
> > @@ -7,13 +7,27 @@
> >  #include <linux/numa.h>
> >  #include <linux/numa_memblks.h>
> >  
> 
> > +/*
> > + * Set nodes, which have memory in @mi, in *@nodemask.
> > + */
> > +static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
> > +					      const struct numa_meminfo *mi)
> > +{
> > +	int i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
> > +		if (mi->blk[i].start != mi->blk[i].end &&
> > +		    mi->blk[i].nid != NUMA_NO_NODE)
> > +			node_set(mi->blk[i].nid, *nodemask);
> > +}
> 
> The code move doesn't have an obvious purpose. Maybe call that
> out in the patch description if it is needed for a future patch.
> Or do it in two goes so first just adds the static, 2nd shuffles
> the code.
 
Before the move numa_nodemask_from_meminfo() was global so it was ok to
define it after its callers.
I'll split this into a separate commit.
Mike Rapoport July 22, 2024, 8:05 a.m. UTC | #3
On Fri, Jul 19, 2024 at 07:07:12PM +0100, Jonathan Cameron wrote:
> On Tue, 16 Jul 2024 14:13:44 +0300
> Mike Rapoport <rppt@kernel.org> wrote:
> 
> > From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
> > 
> > Introduce numa_memblks_init() and move some code around to avoid several
> > global variables in numa_memblks.
> 
> Hi Mike,
> 
> Adding the effectively always on memblock_force_top_down
> deserves a comment on why. I assume because you are going to do
> something with it later? 
> 
> There also seems to be more going on in here such as the change to
> get_pfn_range_for_nid()  Perhaps break this up so each
> change can have an explanation. 

I'll split this into several commits.
diff mbox series

Patch

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 3848e68d771a..16bc703c9272 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -115,30 +115,19 @@  void __init setup_node_to_cpumask_map(void)
 	pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
 }
 
-static int __init numa_register_memblks(struct numa_meminfo *mi)
+static int __init numa_register_nodes(void)
 {
-	int i, nid, err;
-
-	err = numa_register_meminfo(mi);
-	if (err)
-		return err;
+	int nid;
 
 	if (!memblock_validate_numa_coverage(SZ_1M))
 		return -EINVAL;
 
 	/* Finally register nodes. */
 	for_each_node_mask(nid, node_possible_map) {
-		u64 start = PFN_PHYS(max_pfn);
-		u64 end = 0;
-
-		for (i = 0; i < mi->nr_blks; i++) {
-			if (nid != mi->blk[i].nid)
-				continue;
-			start = min(mi->blk[i].start, start);
-			end = max(mi->blk[i].end, end);
-		}
+		unsigned long start_pfn, end_pfn;
 
-		if (start >= end)
+		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+		if (start_pfn >= end_pfn)
 			continue;
 
 		alloc_node_data(nid);
@@ -178,39 +167,11 @@  static int __init numa_init(int (*init_func)(void))
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		set_apicid_to_node(i, NUMA_NO_NODE);
 
-	nodes_clear(numa_nodes_parsed);
-	nodes_clear(node_possible_map);
-	nodes_clear(node_online_map);
-	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
-				  NUMA_NO_NODE));
-	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
-				  NUMA_NO_NODE));
-	/* In case that parsing SRAT failed. */
-	WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
-	numa_reset_distance();
-
-	ret = init_func();
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * We reset memblock back to the top-down direction
-	 * here because if we configured ACPI_NUMA, we have
-	 * parsed SRAT in init_func(). It is ok to have the
-	 * reset here even if we did't configure ACPI_NUMA
-	 * or acpi numa init fails and fallbacks to dummy
-	 * numa init.
-	 */
-	memblock_set_bottom_up(false);
-
-	ret = numa_cleanup_meminfo(&numa_meminfo);
+	ret = numa_memblks_init(init_func, /* memblock_force_top_down */ true);
 	if (ret < 0)
 		return ret;
 
-	numa_emulation(&numa_meminfo, numa_distance_cnt);
-
-	ret = numa_register_memblks(&numa_meminfo);
+	ret = numa_register_nodes();
 	if (ret < 0)
 		return ret;
 
diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h
index f81f98678074..5c6e12ad0b7a 100644
--- a/include/linux/numa_memblks.h
+++ b/include/linux/numa_memblks.h
@@ -7,7 +7,6 @@ 
 
 #define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
 
-extern int numa_distance_cnt;
 void __init numa_set_distance(int from, int to, int distance);
 void __init numa_reset_distance(void);
 
@@ -22,17 +21,13 @@  struct numa_meminfo {
 	struct numa_memblk	blk[NR_NODE_MEMBLKS];
 };
 
-extern struct numa_meminfo numa_meminfo __initdata_or_meminfo;
-extern struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
-
 int __init numa_add_memblk(int nodeid, u64 start, u64 end);
 void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi);
 
 int __init numa_cleanup_meminfo(struct numa_meminfo *mi);
-int __init numa_register_meminfo(struct numa_meminfo *mi);
 
-void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
-				       const struct numa_meminfo *mi);
+int __init numa_memblks_init(int (*init_func)(void),
+			     bool memblock_force_top_down);
 
 #ifdef CONFIG_NUMA_EMU
 int numa_emu_cmdline(char *str);
diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
index e0039549aaac..640f3a3ce0ee 100644
--- a/mm/numa_memblks.c
+++ b/mm/numa_memblks.c
@@ -7,13 +7,27 @@ 
 #include <linux/numa.h>
 #include <linux/numa_memblks.h>
 
-int numa_distance_cnt;
+static int numa_distance_cnt;
 static u8 *numa_distance;
 
 nodemask_t numa_nodes_parsed __initdata;
 
-struct numa_meminfo numa_meminfo __initdata_or_meminfo;
-struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
+static struct numa_meminfo numa_meminfo __initdata_or_meminfo;
+static struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
+
+/*
+ * Set nodes, which have memory in @mi, in *@nodemask.
+ */
+static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
+					      const struct numa_meminfo *mi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
+		if (mi->blk[i].start != mi->blk[i].end &&
+		    mi->blk[i].nid != NUMA_NO_NODE)
+			node_set(mi->blk[i].nid, *nodemask);
+}
 
 /**
  * numa_reset_distance - Reset NUMA distance table
@@ -287,20 +301,6 @@  int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
 	return 0;
 }
 
-/*
- * Set nodes, which have memory in @mi, in *@nodemask.
- */
-void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
-				       const struct numa_meminfo *mi)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
-		if (mi->blk[i].start != mi->blk[i].end &&
-		    mi->blk[i].nid != NUMA_NO_NODE)
-			node_set(mi->blk[i].nid, *nodemask);
-}
-
 /*
  * Mark all currently memblock-reserved physical memory (which covers the
  * kernel's own memory ranges) as hot-unswappable.
@@ -368,7 +368,7 @@  static void __init numa_clear_kernel_node_hotplug(void)
 	}
 }
 
-int __init numa_register_meminfo(struct numa_meminfo *mi)
+static int __init numa_register_meminfo(struct numa_meminfo *mi)
 {
 	int i;
 
@@ -412,6 +412,47 @@  int __init numa_register_meminfo(struct numa_meminfo *mi)
 	return 0;
 }
 
+int __init numa_memblks_init(int (*init_func)(void),
+			     bool memblock_force_top_down)
+{
+	int ret;
+
+	nodes_clear(numa_nodes_parsed);
+	nodes_clear(node_possible_map);
+	nodes_clear(node_online_map);
+	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
+				  NUMA_NO_NODE));
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
+				  NUMA_NO_NODE));
+	/* In case that parsing SRAT failed. */
+	WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
+	numa_reset_distance();
+
+	ret = init_func();
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * We reset memblock back to the top-down direction
+	 * here because if we configured ACPI_NUMA, we have
+	 * parsed SRAT in init_func(). It is ok to have the
+	 * reset here even if we did't configure ACPI_NUMA
+	 * or acpi numa init fails and fallbacks to dummy
+	 * numa init.
+	 */
+	if (memblock_force_top_down)
+		memblock_set_bottom_up(false);
+
+	ret = numa_cleanup_meminfo(&numa_meminfo);
+	if (ret < 0)
+		return ret;
+
+	numa_emulation(&numa_meminfo, numa_distance_cnt);
+
+	return numa_register_meminfo(&numa_meminfo);
+}
+
 static int __init cmp_memblk(const void *a, const void *b)
 {
 	const struct numa_memblk *ma = *(const struct numa_memblk **)a;