diff mbox series

[v2,3/3] platform/surface: Add OF support

Message ID 20240810-topic-sam-v2-3-8a8eb368a4f0@quicinc.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series OF support for Surface System Aggregator Module | expand

Commit Message

Konrad Dybcio Aug. 10, 2024, 1:28 a.m. UTC
From: Konrad Dybcio <quic_kdybcio@quicinc.com>

Add basic support for registering the aggregator module on Device Tree-
based platforms. These include at least three generations of Qualcomm
Snapdragon-based Surface devices:

- SC8180X / SQ1 / SQ2: Pro X,
- SC8280XP / SQ3: Devkit 2023, Pro 9
- X Elite: Laptop 7 / Pro11

Thankfully, the aggregators on these seem to be configured in an
identical way, which allows for using these settings as defaults and
no DT properties need to be introduced (until that changes, anyway).

Based on the work done by Maximilian Luz, largely rewritten.

Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
---
 drivers/platform/surface/aggregator/bus.c          |  2 +
 drivers/platform/surface/aggregator/controller.c   | 67 ++++++++++++++----
 drivers/platform/surface/aggregator/core.c         | 82 +++++++++++++++++-----
 drivers/platform/surface/surface3_power.c          |  4 +-
 drivers/platform/surface/surface_acpi_notify.c     |  4 +-
 .../platform/surface/surface_aggregator_registry.c | 44 ++++++++++--
 6 files changed, 164 insertions(+), 39 deletions(-)

Comments

Maximilian Luz Aug. 10, 2024, 1:47 a.m. UTC | #1
On 8/10/24 3:28 AM, Konrad Dybcio wrote:
> From: Konrad Dybcio <quic_kdybcio@quicinc.com>

[...]

> @@ -299,7 +302,7 @@ static const struct attribute_group ssam_sam_group = {
>   };
>   
>   
> -/* -- ACPI based device setup. ---------------------------------------------- */
> +/* -- Serial device setup. ------------------------------------------------- */

One more :)

[...]

> diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c
> index 4c0f92562a79..7eab6a124712 100644
> --- a/drivers/platform/surface/surface3_power.c
> +++ b/drivers/platform/surface/surface3_power.c
> @@ -478,7 +478,9 @@ static int mshw0011_install_space_handler(struct i2c_client *client)
>   		return -ENOMEM;
>   	}
>   
> -	acpi_dev_clear_dependencies(adev);
> +	if (adev)
> +		acpi_dev_clear_dependencies(adev);
> +
>   	return 0;
>   }
>   
> diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c
> index 20f3870915d2..b0d43e639db2 100644
> --- a/drivers/platform/surface/surface_acpi_notify.c
> +++ b/drivers/platform/surface/surface_acpi_notify.c
> @@ -815,7 +815,9 @@ static int san_probe(struct platform_device *pdev)
>   	if (status)
>   		goto err_install_dev;
>   
> -	acpi_dev_clear_dependencies(san);
> +	if (san)
> +		acpi_dev_clear_dependencies(san);
> +
>   	return 0;
>   
>   err_install_dev:

Are these two changes required? Surface 3 power and SAN should AFAIK be
fairly "legacy" and ACPI-only drivers, which I don't expect to be used
on any of the new ARM devices (apart from there probably being other
changes required to make them work with DT).

I think with that addressed, it should be fine. I'll give it a spin
tomorrow and send in my r-b and t-b (assuming everything goes well).

Best regards,
Max
Konrad Dybcio Aug. 10, 2024, 11:21 a.m. UTC | #2
On 10.08.2024 3:47 AM, Maximilian Luz wrote:
> On 8/10/24 3:28 AM, Konrad Dybcio wrote:
>> From: Konrad Dybcio <quic_kdybcio@quicinc.com>
> 
> [...]
> 
>> @@ -299,7 +302,7 @@ static const struct attribute_group ssam_sam_group = {
>>   };
>>     -/* -- ACPI based device setup. ---------------------------------------------- */
>> +/* -- Serial device setup. ------------------------------------------------- */
> 
> One more :)

Right, cursor at 80 != 80-long :P

[...]

> Are these two changes required? Surface 3 power and SAN should AFAIK be
> fairly "legacy" and ACPI-only drivers, which I don't expect to be used
> on any of the new ARM devices (apart from there probably being other
> changes required to make them work with DT).
> 
> I think with that addressed, it should be fine. I'll give it a spin
> tomorrow and send in my r-b and t-b (assuming everything goes well).

No, I went overly defensive here. Will drop for v3 next week.

Konrad
Maximilian Luz Aug. 10, 2024, 1 p.m. UTC | #3
On 8/10/24 1:21 PM, Konrad Dybcio wrote:
> On 10.08.2024 3:47 AM, Maximilian Luz wrote:
>> On 8/10/24 3:28 AM, Konrad Dybcio wrote:
>>> From: Konrad Dybcio <quic_kdybcio@quicinc.com>
>>
>> [...]
>>
>>> @@ -299,7 +302,7 @@ static const struct attribute_group ssam_sam_group = {
>>>    };
>>>      -/* -- ACPI based device setup. ---------------------------------------------- */
>>> +/* -- Serial device setup. ------------------------------------------------- */
>>
>> One more :)
> 
> Right, cursor at 80 != 80-long :P
> 
> [...]
> 
>> Are these two changes required? Surface 3 power and SAN should AFAIK be
>> fairly "legacy" and ACPI-only drivers, which I don't expect to be used
>> on any of the new ARM devices (apart from there probably being other
>> changes required to make them work with DT).
>>
>> I think with that addressed, it should be fine. I'll give it a spin
>> tomorrow and send in my r-b and t-b (assuming everything goes well).
> 
> No, I went overly defensive here. Will drop for v3 next week.

Perfect, Thank you!

Best regards,
Max
Maximilian Luz Aug. 11, 2024, 12:26 a.m. UTC | #4
On 8/10/24 3:28 AM, Konrad Dybcio wrote:
> From: Konrad Dybcio <quic_kdybcio@quicinc.com>

[...]

> @@ -346,7 +359,7 @@ static const struct software_node *ssam_node_group_sp9[] = {
>   
>   /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
>   
> -static const struct acpi_device_id ssam_platform_hub_match[] = {
> +static const struct acpi_device_id ssam_platform_hub_acpi_match[] = {
>   	/* Surface Pro 4, 5, and 6 (OMBR < 0x10) */
>   	{ "MSHW0081", (unsigned long)ssam_node_group_gen5 },
>   
> @@ -402,16 +415,39 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
>   };
>   MODULE_DEVICE_TABLE(acpi, ssam_platform_hub_match);

This should be

     MODULE_DEVICE_TABLE(acpi, ssam_platform_hub_acpi_match);

as it has been renamed above. In addition to this, the
surface_aggregator_registry module currently does not auto-load. So we
also need to add

     MODULE_ALIAS("platform:surface_aggregator_platform_hub");

somewhere. With that fixed, it builds and runs fine on the SPX.

Best regards,
Max
diff mbox series

Patch

diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c
index af8d573aae93..d68d231e716e 100644
--- a/drivers/platform/surface/aggregator/bus.c
+++ b/drivers/platform/surface/aggregator/bus.c
@@ -6,6 +6,7 @@ 
  */
 
 #include <linux/device.h>
+#include <linux/of.h>
 #include <linux/property.h>
 #include <linux/slab.h>
 
@@ -441,6 +442,7 @@  static int ssam_add_client_device(struct device *parent, struct ssam_controller
 
 	sdev->dev.parent = parent;
 	sdev->dev.fwnode = fwnode_handle_get(node);
+	sdev->dev.of_node = to_of_node(node);
 
 	status = ssam_device_add(sdev);
 	if (status)
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index 7fc602e01487..27eadf22b292 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -1104,13 +1104,6 @@  int ssam_controller_caps_load_from_acpi(acpi_handle handle,
 	u64 funcs;
 	int status;
 
-	/* Set defaults. */
-	caps->ssh_power_profile = U32_MAX;
-	caps->screen_on_sleep_idle_timeout = U32_MAX;
-	caps->screen_off_sleep_idle_timeout = U32_MAX;
-	caps->d3_closes_handle = false;
-	caps->ssh_buffer_size = U32_MAX;
-
 	/* Pre-load supported DSM functions. */
 	status = ssam_dsm_get_functions(handle, &funcs);
 	if (status)
@@ -1149,6 +1142,52 @@  int ssam_controller_caps_load_from_acpi(acpi_handle handle,
 	return 0;
 }
 
+/**
+ * ssam_controller_caps_load_from_of() - Load controller capabilities from OF/DT.
+ * @dev:  A pointer to the controller device
+ * @caps: Where to store the capabilities in.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+static int ssam_controller_caps_load_from_of(struct device *dev, struct ssam_controller_caps *caps)
+{
+	/*
+	 * Every device starting with Surface Pro X through Laptop 7 uses these
+	 * identical values, which makes them good defaults.
+	 */
+	caps->d3_closes_handle = true;
+	caps->screen_on_sleep_idle_timeout = 5000;
+	caps->screen_off_sleep_idle_timeout = 30;
+	caps->ssh_buffer_size = 48;
+	/* TODO: figure out power profile */
+
+	return 0;
+}
+
+/**
+ * ssam_controller_caps_load() - Load controller capabilities
+ * @dev:  A pointer to the controller device
+ * @caps: Where to store the capabilities in.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+static int ssam_controller_caps_load(struct device *dev, struct ssam_controller_caps *caps)
+{
+	acpi_handle handle = ACPI_HANDLE(dev);
+
+	/* Set defaults. */
+	caps->ssh_power_profile = U32_MAX;
+	caps->screen_on_sleep_idle_timeout = U32_MAX;
+	caps->screen_off_sleep_idle_timeout = U32_MAX;
+	caps->d3_closes_handle = false;
+	caps->ssh_buffer_size = U32_MAX;
+
+	if (handle)
+		return ssam_controller_caps_load_from_acpi(handle, caps);
+	else
+		return ssam_controller_caps_load_from_of(dev, caps);
+}
+
 /**
  * ssam_controller_init() - Initialize SSAM controller.
  * @ctrl:   The controller to initialize.
@@ -1165,13 +1204,12 @@  int ssam_controller_caps_load_from_acpi(acpi_handle handle,
 int ssam_controller_init(struct ssam_controller *ctrl,
 			 struct serdev_device *serdev)
 {
-	acpi_handle handle = ACPI_HANDLE(&serdev->dev);
 	int status;
 
 	init_rwsem(&ctrl->lock);
 	kref_init(&ctrl->kref);
 
-	status = ssam_controller_caps_load_from_acpi(handle, &ctrl->caps);
+	status = ssam_controller_caps_load(&serdev->dev, &ctrl->caps);
 	if (status)
 		return status;
 
@@ -2715,11 +2753,12 @@  int ssam_irq_setup(struct ssam_controller *ctrl)
 	const int irqf = IRQF_ONESHOT | IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN;
 
 	gpiod = gpiod_get(dev, "ssam_wakeup-int", GPIOD_ASIS);
-	if (IS_ERR(gpiod))
-		return PTR_ERR(gpiod);
-
-	irq = gpiod_to_irq(gpiod);
-	gpiod_put(gpiod);
+	if (IS_ERR(gpiod)) {
+		irq = fwnode_irq_get(dev_fwnode(dev), 0);
+	} else {
+		irq = gpiod_to_irq(gpiod);
+		gpiod_put(gpiod);
+	}
 
 	if (irq < 0)
 		return irq;
diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c
index 797d0645bd77..2691b6438c0a 100644
--- a/drivers/platform/surface/aggregator/core.c
+++ b/drivers/platform/surface/aggregator/core.c
@@ -17,9 +17,12 @@ 
 #include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/serdev.h>
 #include <linux/sysfs.h>
+#include <linux/units.h>
 
 #include <linux/surface_aggregator/controller.h>
 #include <linux/surface_aggregator/device.h>
@@ -299,7 +302,7 @@  static const struct attribute_group ssam_sam_group = {
 };
 
 
-/* -- ACPI based device setup. ---------------------------------------------- */
+/* -- Serial device setup. ------------------------------------------------- */
 
 static acpi_status ssam_serdev_setup_via_acpi_crs(struct acpi_resource *rsc,
 						  void *ctx)
@@ -352,13 +355,28 @@  static acpi_status ssam_serdev_setup_via_acpi_crs(struct acpi_resource *rsc,
 	return AE_CTRL_TERMINATE;
 }
 
-static acpi_status ssam_serdev_setup_via_acpi(acpi_handle handle,
-					      struct serdev_device *serdev)
+static int ssam_serdev_setup_via_acpi(struct serdev_device *serdev, acpi_handle handle)
 {
-	return acpi_walk_resources(handle, METHOD_NAME__CRS,
-				   ssam_serdev_setup_via_acpi_crs, serdev);
+	acpi_status status;
+
+	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
+				     ssam_serdev_setup_via_acpi_crs, serdev);
+
+	return status ? -ENXIO : 0;
 }
 
+static int ssam_serdev_setup(struct acpi_device *ssh, struct serdev_device *serdev)
+{
+	if (ssh)
+		return ssam_serdev_setup_via_acpi(serdev, ssh->handle);
+
+	/* TODO: these values may differ per board/implementation */
+	serdev_device_set_baudrate(serdev, 4 * HZ_PER_MHZ);
+	serdev_device_set_flow_control(serdev, true);
+	serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+
+	return 0;
+}
 
 /* -- Power management. ----------------------------------------------------- */
 
@@ -621,16 +639,17 @@  static int ssam_serial_hub_probe(struct serdev_device *serdev)
 	struct device *dev = &serdev->dev;
 	struct acpi_device *ssh = ACPI_COMPANION(dev);
 	struct ssam_controller *ctrl;
-	acpi_status astatus;
 	int status;
 
-	status = gpiod_count(dev, NULL);
-	if (status < 0)
-		return dev_err_probe(dev, status, "no GPIO found\n");
+	if (ssh) {
+		status = gpiod_count(dev, NULL);
+		if (status < 0)
+			return dev_err_probe(dev, status, "no GPIO found\n");
 
-	status = devm_acpi_dev_add_driver_gpios(dev, ssam_acpi_gpios);
-	if (status)
-		return status;
+		status = devm_acpi_dev_add_driver_gpios(dev, ssam_acpi_gpios);
+		if (status)
+			return status;
+	}
 
 	/* Allocate controller. */
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
@@ -655,9 +674,9 @@  static int ssam_serial_hub_probe(struct serdev_device *serdev)
 		goto err_devopen;
 	}
 
-	astatus = ssam_serdev_setup_via_acpi(ssh->handle, serdev);
-	if (ACPI_FAILURE(astatus)) {
-		status = dev_err_probe(dev, -ENXIO, "failed to setup serdev\n");
+	status = ssam_serdev_setup(ssh, serdev);
+	if (status) {
+		status = dev_err_probe(dev, status, "failed to setup serdev\n");
 		goto err_devinit;
 	}
 
@@ -717,7 +736,23 @@  static int ssam_serial_hub_probe(struct serdev_device *serdev)
 	 *       For now let's thus default power/wakeup to false.
 	 */
 	device_set_wakeup_capable(dev, true);
-	acpi_dev_clear_dependencies(ssh);
+
+	/*
+	 * When using DT, we have to register the platform hub driver manually,
+	 * as it can't be matched based on top-level board compatible (like it
+	 * does the ACPI case).
+	 */
+	if (!ssh) {
+		struct platform_device *ph_pdev =
+			platform_device_register_simple("surface_aggregator_platform_hub",
+							0, NULL, 0);
+		if (IS_ERR(ph_pdev))
+			return dev_err_probe(dev, PTR_ERR(ph_pdev),
+					     "Failed to register the platform hub driver\n");
+	}
+
+	if (ssh)
+		acpi_dev_clear_dependencies(ssh);
 
 	return 0;
 
@@ -782,18 +817,27 @@  static void ssam_serial_hub_remove(struct serdev_device *serdev)
 	device_set_wakeup_capable(&serdev->dev, false);
 }
 
-static const struct acpi_device_id ssam_serial_hub_match[] = {
+static const struct acpi_device_id ssam_serial_hub_acpi_match[] = {
 	{ "MSHW0084", 0 },
 	{ },
 };
-MODULE_DEVICE_TABLE(acpi, ssam_serial_hub_match);
+MODULE_DEVICE_TABLE(acpi, ssam_serial_hub_acpi_match);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ssam_serial_hub_of_match[] = {
+	{ .compatible = "microsoft,surface-sam", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ssam_serial_hub_of_match);
+#endif
 
 static struct serdev_device_driver ssam_serial_hub = {
 	.probe = ssam_serial_hub_probe,
 	.remove = ssam_serial_hub_remove,
 	.driver = {
 		.name = "surface_serial_hub",
-		.acpi_match_table = ssam_serial_hub_match,
+		.acpi_match_table = ACPI_PTR(ssam_serial_hub_acpi_match),
+		.of_match_table = of_match_ptr(ssam_serial_hub_of_match),
 		.pm = &ssam_serial_hub_pm_ops,
 		.shutdown = ssam_serial_hub_shutdown,
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c
index 4c0f92562a79..7eab6a124712 100644
--- a/drivers/platform/surface/surface3_power.c
+++ b/drivers/platform/surface/surface3_power.c
@@ -478,7 +478,9 @@  static int mshw0011_install_space_handler(struct i2c_client *client)
 		return -ENOMEM;
 	}
 
-	acpi_dev_clear_dependencies(adev);
+	if (adev)
+		acpi_dev_clear_dependencies(adev);
+
 	return 0;
 }
 
diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c
index 20f3870915d2..b0d43e639db2 100644
--- a/drivers/platform/surface/surface_acpi_notify.c
+++ b/drivers/platform/surface/surface_acpi_notify.c
@@ -815,7 +815,9 @@  static int san_probe(struct platform_device *pdev)
 	if (status)
 		goto err_install_dev;
 
-	acpi_dev_clear_dependencies(san);
+	if (san)
+		acpi_dev_clear_dependencies(san);
+
 	return 0;
 
 err_install_dev:
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 1c4d74db08c9..57787f2ff38b 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -12,6 +12,7 @@ 
 #include <linux/acpi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/types.h>
@@ -273,6 +274,18 @@  static const struct software_node *ssam_node_group_sl5[] = {
 	NULL,
 };
 
+/* Devices for Surface Laptop 7. */
+static const struct software_node *ssam_node_group_sl7[] = {
+	&ssam_node_root,
+	&ssam_node_bat_ac,
+	&ssam_node_bat_main,
+	&ssam_node_tmp_perf_profile_with_fan,
+	&ssam_node_fan_speed,
+	&ssam_node_hid_sam_keyboard,
+	/* TODO: evaluate thermal sensors devices when we get a driver for that */
+	NULL,
+};
+
 /* Devices for Surface Laptop Studio. */
 static const struct software_node *ssam_node_group_sls[] = {
 	&ssam_node_root,
@@ -346,7 +359,7 @@  static const struct software_node *ssam_node_group_sp9[] = {
 
 /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
 
-static const struct acpi_device_id ssam_platform_hub_match[] = {
+static const struct acpi_device_id ssam_platform_hub_acpi_match[] = {
 	/* Surface Pro 4, 5, and 6 (OMBR < 0x10) */
 	{ "MSHW0081", (unsigned long)ssam_node_group_gen5 },
 
@@ -402,16 +415,39 @@  static const struct acpi_device_id ssam_platform_hub_match[] = {
 };
 MODULE_DEVICE_TABLE(acpi, ssam_platform_hub_match);
 
+#ifdef CONFIG_OF
+static const struct of_device_id ssam_platform_hub_of_match[] = {
+	/* Surface Laptop 7 */
+	{ .compatible = "microsoft,romulus13", (void *)ssam_node_group_sl7 },
+	{ .compatible = "microsoft,romulus15", (void *)ssam_node_group_sl7 },
+	{ },
+};
+#endif
+
 static int ssam_platform_hub_probe(struct platform_device *pdev)
 {
 	const struct software_node **nodes;
+	const struct of_device_id *match;
+	struct device_node *fdt_root;
 	struct ssam_controller *ctrl;
 	struct fwnode_handle *root;
 	int status;
 
 	nodes = (const struct software_node **)acpi_device_get_match_data(&pdev->dev);
-	if (!nodes)
-		return -ENODEV;
+	if (!nodes) {
+		fdt_root = of_find_node_by_path("/");
+		if (!fdt_root)
+			return -ENODEV;
+
+		match = of_match_node(ssam_platform_hub_of_match, fdt_root);
+		of_node_put(fdt_root);
+		if (!match)
+			return -ENODEV;
+
+		nodes = (const struct software_node **)match->data;
+		if (!nodes)
+			return -ENODEV;
+	}
 
 	/*
 	 * As we're adding the SSAM client devices as children under this device
@@ -460,7 +496,7 @@  static struct platform_driver ssam_platform_hub_driver = {
 	.remove_new = ssam_platform_hub_remove,
 	.driver = {
 		.name = "surface_aggregator_platform_hub",
-		.acpi_match_table = ssam_platform_hub_match,
+		.acpi_match_table = ssam_platform_hub_acpi_match,
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 };