diff mbox series

[v2] ACPI: EC: Set ec_no_wakeup for Lenovo Go S

Message ID 20250401133858.1892077-1-superm1@kernel.org (mailing list archive)
State New
Headers show
Series [v2] ACPI: EC: Set ec_no_wakeup for Lenovo Go S | expand

Commit Message

Mario Limonciello April 1, 2025, 1:38 p.m. UTC
From: Mario Limonciello <mario.limonciello@amd.com>

When AC adapter is unplugged or plugged in EC wakes from
HW sleep but APU doesn't enter back into HW sleep.

The reason this happens is that when APU exits HW sleep the power rails
the EC controls will power up the TCON.  The TCON has a GPIO that will
be toggled during this time.  The GPIO is not marked as a wakeup source,
however GPIO controller still has an unserviced interrupt. Unserviced
interrupts will block entering HW sleep again. Clearing the GPIO doesn't
help as the TCON continues to assert it until it's been initialized by
i2c-hid.

Fixing this would require TCON F/W changes and it's already broken
in the wild on production hardware.

To avoid triggering this issue add a quirk to avoid letting EC wake
up system at all.  The power button still works properly on this system.

Cc: Xino JS1 Ni <nijs1@lenovo.com>
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
Link: https://github.com/bazzite-org/patchwork/commit/95b93b2852718ee1e808c72e6b1836da4a95fc63
Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v2:
 Add more tags
 Fix a typo and grammar in commit
---
 drivers/acpi/ec.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Comments

Rafael J. Wysocki April 1, 2025, 1:48 p.m. UTC | #1
On Tue, Apr 1, 2025 at 3:39 PM Mario Limonciello <superm1@kernel.org> wrote:
>
> From: Mario Limonciello <mario.limonciello@amd.com>
>
> When AC adapter is unplugged or plugged in EC wakes from
> HW sleep but APU doesn't enter back into HW sleep.
>
> The reason this happens is that when APU exits HW sleep the power rails
> the EC controls will power up the TCON.

I think that the above should be

"The reason this happens is that, when the APU exits HW sleep, the
power rails controlled by the EC will power up the TCON."

If I'm not mistaken, please let me know and I'll make this change when
applying the patch.

> The TCON has a GPIO that will
> be toggled during this time.  The GPIO is not marked as a wakeup source,
> however GPIO controller still has an unserviced interrupt. Unserviced
> interrupts will block entering HW sleep again. Clearing the GPIO doesn't
> help as the TCON continues to assert it until it's been initialized by
> i2c-hid.
>
> Fixing this would require TCON F/W changes and it's already broken
> in the wild on production hardware.
>
> To avoid triggering this issue add a quirk to avoid letting EC wake
> up system at all.  The power button still works properly on this system.
>
> Cc: Xino JS1 Ni <nijs1@lenovo.com>
> Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
> Link: https://github.com/bazzite-org/patchwork/commit/95b93b2852718ee1e808c72e6b1836da4a95fc63
> Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
> v2:
>  Add more tags
>  Fix a typo and grammar in commit
> ---
>  drivers/acpi/ec.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
>
> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
> index 8db09d81918fb..3c5f34892734e 100644
> --- a/drivers/acpi/ec.c
> +++ b/drivers/acpi/ec.c
> @@ -2301,6 +2301,34 @@ static const struct dmi_system_id acpi_ec_no_wakeup[] = {
>                         DMI_MATCH(DMI_PRODUCT_FAMILY, "103C_5336AN HP ZHAN 66 Pro"),
>                 },
>         },
> +       /*
> +        * Lenovo Legion Go S; touchscreen blocks HW sleep when woken up from EC
> +        * https://gitlab.freedesktop.org/drm/amd/-/issues/3929
> +        */
> +       {
> +               .matches = {
> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83L3"),
> +               }
> +       },
> +       {
> +               .matches = {
> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83N6"),
> +               }
> +       },
> +       {
> +               .matches = {
> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83Q2"),
> +               }
> +       },
> +       {
> +               .matches = {
> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83Q3"),
> +               }
> +       },
>         { },
>  };
>
> --
> 2.43.0
>
Mario Limonciello April 1, 2025, 2:18 p.m. UTC | #2
On 4/1/2025 8:48 AM, Rafael J. Wysocki wrote:
> On Tue, Apr 1, 2025 at 3:39 PM Mario Limonciello <superm1@kernel.org> wrote:
>>
>> From: Mario Limonciello <mario.limonciello@amd.com>
>>
>> When AC adapter is unplugged or plugged in EC wakes from
>> HW sleep but APU doesn't enter back into HW sleep.
>>
>> The reason this happens is that when APU exits HW sleep the power rails
>> the EC controls will power up the TCON.
> 
> I think that the above should be
> 
> "The reason this happens is that, when the APU exits HW sleep, the
> power rails controlled by the EC will power up the TCON."
> 
> If I'm not mistaken, please let me know and I'll make this change when
> applying the patch.

Sounds good, thanks!

> 
>> The TCON has a GPIO that will
>> be toggled during this time.  The GPIO is not marked as a wakeup source,
>> however GPIO controller still has an unserviced interrupt. Unserviced
>> interrupts will block entering HW sleep again. Clearing the GPIO doesn't
>> help as the TCON continues to assert it until it's been initialized by
>> i2c-hid.
>>
>> Fixing this would require TCON F/W changes and it's already broken
>> in the wild on production hardware.
>>
>> To avoid triggering this issue add a quirk to avoid letting EC wake
>> up system at all.  The power button still works properly on this system.
>>
>> Cc: Xino JS1 Ni <nijs1@lenovo.com>
>> Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
>> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
>> Link: https://github.com/bazzite-org/patchwork/commit/95b93b2852718ee1e808c72e6b1836da4a95fc63
>> Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
>> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
>> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
>> ---
>> v2:
>>   Add more tags
>>   Fix a typo and grammar in commit
>> ---
>>   drivers/acpi/ec.c | 28 ++++++++++++++++++++++++++++
>>   1 file changed, 28 insertions(+)
>>
>> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
>> index 8db09d81918fb..3c5f34892734e 100644
>> --- a/drivers/acpi/ec.c
>> +++ b/drivers/acpi/ec.c
>> @@ -2301,6 +2301,34 @@ static const struct dmi_system_id acpi_ec_no_wakeup[] = {
>>                          DMI_MATCH(DMI_PRODUCT_FAMILY, "103C_5336AN HP ZHAN 66 Pro"),
>>                  },
>>          },
>> +       /*
>> +        * Lenovo Legion Go S; touchscreen blocks HW sleep when woken up from EC
>> +        * https://gitlab.freedesktop.org/drm/amd/-/issues/3929
>> +        */
>> +       {
>> +               .matches = {
>> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
>> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83L3"),
>> +               }
>> +       },
>> +       {
>> +               .matches = {
>> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
>> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83N6"),
>> +               }
>> +       },
>> +       {
>> +               .matches = {
>> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
>> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83Q2"),
>> +               }
>> +       },
>> +       {
>> +               .matches = {
>> +                       DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
>> +                       DMI_MATCH(DMI_PRODUCT_NAME, "83Q3"),
>> +               }
>> +       },
>>          { },
>>   };
>>
>> --
>> 2.43.0
>>
diff mbox series

Patch

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 8db09d81918fb..3c5f34892734e 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -2301,6 +2301,34 @@  static const struct dmi_system_id acpi_ec_no_wakeup[] = {
 			DMI_MATCH(DMI_PRODUCT_FAMILY, "103C_5336AN HP ZHAN 66 Pro"),
 		},
 	},
+	/*
+	 * Lenovo Legion Go S; touchscreen blocks HW sleep when woken up from EC
+	 * https://gitlab.freedesktop.org/drm/amd/-/issues/3929
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "83L3"),
+		}
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "83N6"),
+		}
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "83Q2"),
+		}
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "83Q3"),
+		}
+	},
 	{ },
 };