diff mbox series

[v1,1/9] ACPI: thermal: Simplify initialization of critical and hot trips

Message ID 4858652.31r3eYUQgx@kreacher (mailing list archive)
State Mainlined, archived
Headers show
Series ACPI: thermal: Removal of redundant data and cleanup | expand

Commit Message

Rafael J. Wysocki Sept. 12, 2023, 6:35 p.m. UTC 
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Use the observation that the critical and hot trip points are never
updated by the ACPI thermal driver, because the flags passed from
acpi_thermal_notify() to acpi_thermal_trips_update() do not include
ACPI_TRIPS_CRITICAL or ACPI_TRIPS_HOT, to move the initialization
of those trip points directly into acpi_thermal_get_trip_points() and
reduce the size of __acpi_thermal_trips_update().

Also make the critical and hot trip points initialization code more
straightforward and drop the flags that are not needed any more.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/thermal.c |  130 ++++++++++++++++++++++++-------------------------
 1 file changed, 66 insertions(+), 64 deletions(-)

Comments

Daniel Lezcano Sept. 25, 2023, 3:20 p.m. UTC | #1 
On 12/09/2023 20:35, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Use the observation that the critical and hot trip points are never
> updated by the ACPI thermal driver, because the flags passed from
> acpi_thermal_notify() to acpi_thermal_trips_update() do not include
> ACPI_TRIPS_CRITICAL or ACPI_TRIPS_HOT, to move the initialization
> of those trip points directly into acpi_thermal_get_trip_points() and
> reduce the size of __acpi_thermal_trips_update().
> 
> Also make the critical and hot trip points initialization code more
> straightforward and drop the flags that are not needed any more.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---

[ ... ]

> +static void acpi_thermal_get_critical_trip(struct acpi_thermal *tz)
> +{
> +	unsigned long long tmp;
> +	acpi_status status;
> +
> +	if (crt > 0) {
> +		tmp = celsius_to_deci_kelvin(crt);
> +		goto set;
> +	}
> +	if (crt == -1) {
> +		acpi_handle_debug(tz->device->handle, "Critical threshold disabled\n");
> +		goto fail;
> +	}
> +
> +	status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
> +	if (ACPI_FAILURE(status)) {
> +		acpi_handle_debug(tz->device->handle, "No critical threshold\n");
> +		goto fail;
> +	}
> +	if (tmp <= 2732) {
> +		/*
> +		 * Below zero (Celsius) values clearly aren't right for sure,
> +		 * so discard them as invalid.
> +		 */
> +		pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
> +		goto fail;
> +	}
> +
> +set:
> +	tz->trips.critical.valid = true;
> +	tz->trips.critical.temperature = tmp;
> +	acpi_handle_debug(tz->device->handle, "Critical threshold [%lu]\n",
> +			  tz->trips.critical.temperature);
> +	return;
> +
> +fail:

nit: 'notset' may be more adequate

> +	tz->trips.critical.valid = false;
> +	tz->trips.critical.temperature = THERMAL_TEMP_INVALID;
> +}

Other than that,

Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rafael J. Wysocki Sept. 25, 2023, 5:12 p.m. UTC | #2 
On Mon, Sep 25, 2023 at 5:20 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> On 12/09/2023 20:35, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > Use the observation that the critical and hot trip points are never
> > updated by the ACPI thermal driver, because the flags passed from
> > acpi_thermal_notify() to acpi_thermal_trips_update() do not include
> > ACPI_TRIPS_CRITICAL or ACPI_TRIPS_HOT, to move the initialization
> > of those trip points directly into acpi_thermal_get_trip_points() and
> > reduce the size of __acpi_thermal_trips_update().
> >
> > Also make the critical and hot trip points initialization code more
> > straightforward and drop the flags that are not needed any more.
> >
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
>
> [ ... ]
>
> > +static void acpi_thermal_get_critical_trip(struct acpi_thermal *tz)
> > +{
> > +     unsigned long long tmp;
> > +     acpi_status status;
> > +
> > +     if (crt > 0) {
> > +             tmp = celsius_to_deci_kelvin(crt);
> > +             goto set;
> > +     }
> > +     if (crt == -1) {
> > +             acpi_handle_debug(tz->device->handle, "Critical threshold disabled\n");
> > +             goto fail;
> > +     }
> > +
> > +     status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
> > +     if (ACPI_FAILURE(status)) {
> > +             acpi_handle_debug(tz->device->handle, "No critical threshold\n");
> > +             goto fail;
> > +     }
> > +     if (tmp <= 2732) {
> > +             /*
> > +              * Below zero (Celsius) values clearly aren't right for sure,
> > +              * so discard them as invalid.
> > +              */
> > +             pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
> > +             goto fail;
> > +     }
> > +
> > +set:
> > +     tz->trips.critical.valid = true;
> > +     tz->trips.critical.temperature = tmp;
> > +     acpi_handle_debug(tz->device->handle, "Critical threshold [%lu]\n",
> > +                       tz->trips.critical.temperature);
> > +     return;
> > +
> > +fail:
>
> nit: 'notset' may be more adequate

Well, this is a bit moot, because the label goes away in one of the
later patches anyway.

> > +     tz->trips.critical.valid = false;
> > +     tz->trips.critical.temperature = THERMAL_TEMP_INVALID;
> > +}
>
> Other than that,
>
> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Thanks!
diff mbox series

Patch

Index: linux-pm/drivers/acpi/thermal.c
===================================================================
--- linux-pm.orig/drivers/acpi/thermal.c
+++ linux-pm/drivers/acpi/thermal.c
@@ -43,17 +43,13 @@ 
 #define ACPI_THERMAL_MAX_ACTIVE		10
 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN	65
 
-#define ACPI_TRIPS_CRITICAL	BIT(0)
-#define ACPI_TRIPS_HOT		BIT(1)
-#define ACPI_TRIPS_PASSIVE	BIT(2)
-#define ACPI_TRIPS_ACTIVE	BIT(3)
-#define ACPI_TRIPS_DEVICES	BIT(4)
+#define ACPI_TRIPS_PASSIVE	BIT(0)
+#define ACPI_TRIPS_ACTIVE	BIT(1)
+#define ACPI_TRIPS_DEVICES	BIT(2)
 
 #define ACPI_TRIPS_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
 
-#define ACPI_TRIPS_INIT		(ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
-				 ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
-				 ACPI_TRIPS_DEVICES)
+#define ACPI_TRIPS_INIT		(ACPI_TRIPS_THRESHOLDS | ACPI_TRIPS_DEVICES)
 
 /*
  * This exception is thrown out in two cases:
@@ -196,62 +192,6 @@  static void __acpi_thermal_trips_update(
 	bool valid = false;
 	int i;
 
-	/* Critical Shutdown */
-	if (flag & ACPI_TRIPS_CRITICAL) {
-		status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
-		tz->trips.critical.temperature = tmp;
-		/*
-		 * Treat freezing temperatures as invalid as well; some
-		 * BIOSes return really low values and cause reboots at startup.
-		 * Below zero (Celsius) values clearly aren't right for sure..
-		 * ... so lets discard those as invalid.
-		 */
-		if (ACPI_FAILURE(status)) {
-			tz->trips.critical.valid = false;
-			acpi_handle_debug(tz->device->handle,
-					  "No critical threshold\n");
-		} else if (tmp <= 2732) {
-			pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
-			tz->trips.critical.valid = false;
-		} else {
-			tz->trips.critical.valid = true;
-			acpi_handle_debug(tz->device->handle,
-					  "Found critical threshold [%lu]\n",
-					  tz->trips.critical.temperature);
-		}
-		if (tz->trips.critical.valid) {
-			if (crt == -1) {
-				tz->trips.critical.valid = false;
-			} else if (crt > 0) {
-				unsigned long crt_k = celsius_to_deci_kelvin(crt);
-
-				/*
-				 * Allow override critical threshold
-				 */
-				if (crt_k > tz->trips.critical.temperature)
-					pr_info("Critical threshold %d C\n", crt);
-
-				tz->trips.critical.temperature = crt_k;
-			}
-		}
-	}
-
-	/* Critical Sleep (optional) */
-	if (flag & ACPI_TRIPS_HOT) {
-		status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &tmp);
-		if (ACPI_FAILURE(status)) {
-			tz->trips.hot.valid = false;
-			acpi_handle_debug(tz->device->handle,
-					  "No hot threshold\n");
-		} else {
-			tz->trips.hot.temperature = tmp;
-			tz->trips.hot.valid = true;
-			acpi_handle_debug(tz->device->handle,
-					  "Found hot threshold [%lu]\n",
-					  tz->trips.hot.temperature);
-		}
-	}
-
 	/* Passive (optional) */
 	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.trip.valid) ||
 	    flag == ACPI_TRIPS_INIT) {
@@ -451,11 +391,73 @@  static void acpi_thermal_trips_update(st
 					dev_name(&adev->dev), event, 0);
 }
 
+static void acpi_thermal_get_critical_trip(struct acpi_thermal *tz)
+{
+	unsigned long long tmp;
+	acpi_status status;
+
+	if (crt > 0) {
+		tmp = celsius_to_deci_kelvin(crt);
+		goto set;
+	}
+	if (crt == -1) {
+		acpi_handle_debug(tz->device->handle, "Critical threshold disabled\n");
+		goto fail;
+	}
+
+	status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_debug(tz->device->handle, "No critical threshold\n");
+		goto fail;
+	}
+	if (tmp <= 2732) {
+		/*
+		 * Below zero (Celsius) values clearly aren't right for sure,
+		 * so discard them as invalid.
+		 */
+		pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
+		goto fail;
+	}
+
+set:
+	tz->trips.critical.valid = true;
+	tz->trips.critical.temperature = tmp;
+	acpi_handle_debug(tz->device->handle, "Critical threshold [%lu]\n",
+			  tz->trips.critical.temperature);
+	return;
+
+fail:
+	tz->trips.critical.valid = false;
+	tz->trips.critical.temperature = THERMAL_TEMP_INVALID;
+}
+
+static void acpi_thermal_get_hot_trip(struct acpi_thermal *tz)
+{
+	unsigned long long tmp;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		tz->trips.hot.valid = false;
+		tz->trips.hot.temperature = THERMAL_TEMP_INVALID;
+		acpi_handle_debug(tz->device->handle, "No hot threshold\n");
+		return;
+	}
+
+	tz->trips.hot.valid = true;
+	tz->trips.hot.temperature = tmp;
+	acpi_handle_debug(tz->device->handle, "Hot threshold [%lu]\n",
+			  tz->trips.hot.temperature);
+}
+
 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 {
 	bool valid;
 	int i;
 
+	acpi_thermal_get_critical_trip(tz);
+	acpi_thermal_get_hot_trip(tz);
+	/* Passive and active trip points (optional). */
 	__acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
 
 	valid = tz->trips.critical.valid |