| Message ID | 492d4d62ae1b3a95570babe9608d8ea971b62585.1474130360.git.lukas@wunner.de (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Sunday, September 18, 2016 05:39:20 AM Lukas Wunner wrote: > Usually the most accurate way to determine a PCI device's power state is > to read its PM Control & Status Register. There are two cases however > when this is not an option: If the device doesn't have the PM > capability at all, or if it is in D3cold (in which case its config space > is inaccessible). > > In both cases, we can alternatively query the platform firmware for its > opinion on the device's power state. To facilitate this, augment struct > pci_platform_pm_ops with a ->get_power callback and implement it for > acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far). > > It is used by a forthcoming commit to let pci_update_current_state() > recognize D3cold. > > Cc: Rafael J. Wysocki <rjw@rjwysocki.net> > Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > > Changes since v1: > * In acpi_pci_get_power_state(), only check for ACPI_STATE_UNKNOWN > instead of ACPI_STATE_D0 and ACPI_STATE_D3_COLD. > * Move the change to pci_update_current_state() to new patch [3/5]. > > drivers/pci/pci-acpi.c | 22 ++++++++++++++++++++++ > drivers/pci/pci.c | 10 ++++++++-- > drivers/pci/pci.h | 3 +++ > 3 files changed, 33 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c > index 9a033e8..d966d47 100644 > --- a/drivers/pci/pci-acpi.c > +++ b/drivers/pci/pci-acpi.c > @@ -452,6 +452,27 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) > return error; > } > > +static pci_power_t acpi_pci_get_power_state(struct pci_dev *dev) > +{ > + struct acpi_device *adev = ACPI_COMPANION(&dev->dev); > + static const pci_power_t state_conv[] = { > + [ACPI_STATE_D0] = PCI_D0, > + [ACPI_STATE_D1] = PCI_D1, > + [ACPI_STATE_D2] = PCI_D2, > + [ACPI_STATE_D3_HOT] = PCI_D3hot, > + [ACPI_STATE_D3_COLD] = PCI_D3cold, > + }; > + int state; > + > + if (!adev || !acpi_device_power_manageable(adev)) > + return PCI_UNKNOWN; > + > + if (acpi_device_get_power(adev, &state) || state == ACPI_STATE_UNKNOWN) > + return PCI_UNKNOWN; > + > + return state_conv[state]; > +} > + > static bool acpi_pci_can_wakeup(struct pci_dev *dev) > { > struct acpi_device *adev = ACPI_COMPANION(&dev->dev); > @@ -534,6 +555,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) > static const struct pci_platform_pm_ops acpi_pci_platform_pm = { > .is_manageable = acpi_pci_power_manageable, > .set_state = acpi_pci_set_power_state, > + .get_state = acpi_pci_get_power_state, > .choose_state = acpi_pci_choose_state, > .sleep_wake = acpi_pci_sleep_wake, > .run_wake = acpi_pci_run_wake, > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 72a9d3a..6ea0d2d 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -552,8 +552,9 @@ static const struct pci_platform_pm_ops *pci_platform_pm; > > int pci_set_platform_pm(const struct pci_platform_pm_ops *ops) > { > - if (!ops->is_manageable || !ops->set_state || !ops->choose_state || > - !ops->sleep_wake || !ops->run_wake || !ops->need_resume) > + if (!ops->is_manageable || !ops->set_state || !ops->get_state || > + !ops->choose_state || !ops->sleep_wake || !ops->run_wake || > + !ops->need_resume) > return -EINVAL; > pci_platform_pm = ops; > return 0; > @@ -570,6 +571,11 @@ static inline int platform_pci_set_power_state(struct pci_dev *dev, > return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS; > } > > +static inline pci_power_t platform_pci_get_power_state(struct pci_dev *dev) > +{ > + return pci_platform_pm ? pci_platform_pm->get_state(dev) : PCI_UNKNOWN; > +} > + > static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) > { > return pci_platform_pm ? > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > index 194521b..4518562 100644 > --- a/drivers/pci/pci.h > +++ b/drivers/pci/pci.h > @@ -42,6 +42,8 @@ int pci_probe_reset_function(struct pci_dev *dev); > * > * @set_state: invokes the platform firmware to set the device's power state > * > + * @get_state: queries the platform firmware for a device's current power state > + * > * @choose_state: returns PCI power state of given device preferred by the > * platform; to be used during system-wide transitions from a > * sleeping state to the working state and vice versa > @@ -62,6 +64,7 @@ int pci_probe_reset_function(struct pci_dev *dev); > struct pci_platform_pm_ops { > bool (*is_manageable)(struct pci_dev *dev); > int (*set_state)(struct pci_dev *dev, pci_power_t state); > + pci_power_t (*get_state)(struct pci_dev *dev); > pci_power_t (*choose_state)(struct pci_dev *dev); > int (*sleep_wake)(struct pci_dev *dev, bool enable); > int (*run_wake)(struct pci_dev *dev, bool enable); >
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 9a033e8..d966d47 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -452,6 +452,27 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) return error; } +static pci_power_t acpi_pci_get_power_state(struct pci_dev *dev) +{ + struct acpi_device *adev = ACPI_COMPANION(&dev->dev); + static const pci_power_t state_conv[] = { + [ACPI_STATE_D0] = PCI_D0, + [ACPI_STATE_D1] = PCI_D1, + [ACPI_STATE_D2] = PCI_D2, + [ACPI_STATE_D3_HOT] = PCI_D3hot, + [ACPI_STATE_D3_COLD] = PCI_D3cold, + }; + int state; + + if (!adev || !acpi_device_power_manageable(adev)) + return PCI_UNKNOWN; + + if (acpi_device_get_power(adev, &state) || state == ACPI_STATE_UNKNOWN) + return PCI_UNKNOWN; + + return state_conv[state]; +} + static bool acpi_pci_can_wakeup(struct pci_dev *dev) { struct acpi_device *adev = ACPI_COMPANION(&dev->dev); @@ -534,6 +555,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) static const struct pci_platform_pm_ops acpi_pci_platform_pm = { .is_manageable = acpi_pci_power_manageable, .set_state = acpi_pci_set_power_state, + .get_state = acpi_pci_get_power_state, .choose_state = acpi_pci_choose_state, .sleep_wake = acpi_pci_sleep_wake, .run_wake = acpi_pci_run_wake, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 72a9d3a..6ea0d2d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -552,8 +552,9 @@ static const struct pci_platform_pm_ops *pci_platform_pm; int pci_set_platform_pm(const struct pci_platform_pm_ops *ops) { - if (!ops->is_manageable || !ops->set_state || !ops->choose_state || - !ops->sleep_wake || !ops->run_wake || !ops->need_resume) + if (!ops->is_manageable || !ops->set_state || !ops->get_state || + !ops->choose_state || !ops->sleep_wake || !ops->run_wake || + !ops->need_resume) return -EINVAL; pci_platform_pm = ops; return 0; @@ -570,6 +571,11 @@ static inline int platform_pci_set_power_state(struct pci_dev *dev, return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS; } +static inline pci_power_t platform_pci_get_power_state(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->get_state(dev) : PCI_UNKNOWN; +} + static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) { return pci_platform_pm ? diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 194521b..4518562 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -42,6 +42,8 @@ int pci_probe_reset_function(struct pci_dev *dev); * * @set_state: invokes the platform firmware to set the device's power state * + * @get_state: queries the platform firmware for a device's current power state + * * @choose_state: returns PCI power state of given device preferred by the * platform; to be used during system-wide transitions from a * sleeping state to the working state and vice versa @@ -62,6 +64,7 @@ int pci_probe_reset_function(struct pci_dev *dev); struct pci_platform_pm_ops { bool (*is_manageable)(struct pci_dev *dev); int (*set_state)(struct pci_dev *dev, pci_power_t state); + pci_power_t (*get_state)(struct pci_dev *dev); pci_power_t (*choose_state)(struct pci_dev *dev); int (*sleep_wake)(struct pci_dev *dev, bool enable); int (*run_wake)(struct pci_dev *dev, bool enable);
Usually the most accurate way to determine a PCI device's power state is to read its PM Control & Status Register. There are two cases however when this is not an option: If the device doesn't have the PM capability at all, or if it is in D3cold (in which case its config space is inaccessible). In both cases, we can alternatively query the platform firmware for its opinion on the device's power state. To facilitate this, augment struct pci_platform_pm_ops with a ->get_power callback and implement it for acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far). It is used by a forthcoming commit to let pci_update_current_state() recognize D3cold. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Lukas Wunner <lukas@wunner.de> --- Changes since v1: * In acpi_pci_get_power_state(), only check for ACPI_STATE_UNKNOWN instead of ACPI_STATE_D0 and ACPI_STATE_D3_COLD. * Move the change to pci_update_current_state() to new patch [3/5]. drivers/pci/pci-acpi.c | 22 ++++++++++++++++++++++ drivers/pci/pci.c | 10 ++++++++-- drivers/pci/pci.h | 3 +++ 3 files changed, 33 insertions(+), 2 deletions(-)