| Message ID | 5507158.DvuYhMxLoT@kreacher (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | ACPI: scan: Release PM resources blocked by unused objects | expand |
On 10/9/2021 09:22, Rafael J. Wysocki wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > On some systems the ACPI namespace contains device objects that are > not used in certain configurations of the system. If they start off > in the D0 power state configuration, they will stay in it until the > system reboots, because of the lack of any mechanism possibly causing > their configuration to change. If that happens, they may prevent > some power resources from being turned off or generally they may > prevent the platform from getting into the deepest low-power states > thus causing some energy to be wasted. > > Address this issue by changing the configuration of unused ACPI > device objects to the D3cold power state one after carrying out > the ACPI-based enumeration of devices. > > BugLink: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.kernel.org%2Fshow_bug.cgi%3Fid%3D214091&data=04%7C01%7Cmario.limonciello%40amd.com%7C6e87f8a1465c424d721c08d98b303310%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637693861879301335%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=zCknM%2FyK8unP%2BI0fstH8OoB5UUVfwOKqeERZOVu9lQY%3D&reserved=0 > Link: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flinux-acpi%2F20211007205126.11769-1-mario.limonciello%40amd.com%2F&data=04%7C01%7Cmario.limonciello%40amd.com%7C6e87f8a1465c424d721c08d98b303310%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637693861879301335%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=4yE1GvAineqku3yjQyfXv6nifmx1uqoEAAbf57eDiFY%3D&reserved=0 > Reported-by: Mario Limonciello <mario.limonciello@amd.com> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> > --- > > Mario, > > I've changed acpi_dev_turn_off_if_unused() to check pnp.type.hardware_id > instead of pnp.type.bus_address, because on some systems there are objects > with both _ADR and _HID (which is against the spec) and the former is bogus. > > Please test this one, even though for PCI devices there should be no difference. > Yes, Thanks. I had a try and this new version is also working correctly on the system this was found. > Thanks! > > --- > drivers/acpi/glue.c | 25 +++++++++++++++++++++++++ > drivers/acpi/internal.h | 1 + > drivers/acpi/scan.c | 6 ++++++ > 3 files changed, 32 insertions(+) > > Index: linux-pm/drivers/acpi/scan.c > =================================================================== > --- linux-pm.orig/drivers/acpi/scan.c > +++ linux-pm/drivers/acpi/scan.c > @@ -2559,6 +2559,12 @@ int __init acpi_scan_init(void) > } > } > > + /* > + * Make sure that power management resources are not blocked by ACPI > + * device objects with no users. > + */ > + bus_for_each_dev(&acpi_bus_type, NULL, NULL, acpi_dev_turn_off_if_unused); > + > acpi_turn_off_unused_power_resources(); > > acpi_scan_initialized = true; > Index: linux-pm/drivers/acpi/glue.c > =================================================================== > --- linux-pm.orig/drivers/acpi/glue.c > +++ linux-pm/drivers/acpi/glue.c > @@ -350,3 +350,28 @@ void acpi_device_notify_remove(struct de > > acpi_unbind_one(dev); > } > + > +int acpi_dev_turn_off_if_unused(struct device *dev, void *not_used) > +{ > + struct acpi_device *adev = to_acpi_device(dev); > + > + /* > + * Skip device objects with device IDs, because they may be in use even > + * if they are not companions of any physical device objects. > + */ > + if (adev->pnp.type.hardware_id) > + return 0; > + > + mutex_lock(&adev->physical_node_lock); > + > + /* > + * Device objects without device IDs are not in use if they have no > + * corresponding physical device objects. > + */ > + if (list_empty(&adev->physical_node_list)) > + acpi_device_set_power(adev, ACPI_STATE_D3_COLD); > + > + mutex_unlock(&adev->physical_node_lock); > + > + return 0; > +} > Index: linux-pm/drivers/acpi/internal.h > =================================================================== > --- linux-pm.orig/drivers/acpi/internal.h > +++ linux-pm/drivers/acpi/internal.h > @@ -117,6 +117,7 @@ bool acpi_device_is_battery(struct acpi_ > bool acpi_device_is_first_physical_node(struct acpi_device *adev, > const struct device *dev); > int acpi_bus_register_early_device(int type); > +int acpi_dev_turn_off_if_unused(struct device *dev, void *not_used); > > /* -------------------------------------------------------------------------- > Device Matching and Notification > > >
Index: linux-pm/drivers/acpi/scan.c =================================================================== --- linux-pm.orig/drivers/acpi/scan.c +++ linux-pm/drivers/acpi/scan.c @@ -2559,6 +2559,12 @@ int __init acpi_scan_init(void) } } + /* + * Make sure that power management resources are not blocked by ACPI + * device objects with no users. + */ + bus_for_each_dev(&acpi_bus_type, NULL, NULL, acpi_dev_turn_off_if_unused); + acpi_turn_off_unused_power_resources(); acpi_scan_initialized = true; Index: linux-pm/drivers/acpi/glue.c =================================================================== --- linux-pm.orig/drivers/acpi/glue.c +++ linux-pm/drivers/acpi/glue.c @@ -350,3 +350,28 @@ void acpi_device_notify_remove(struct de acpi_unbind_one(dev); } + +int acpi_dev_turn_off_if_unused(struct device *dev, void *not_used) +{ + struct acpi_device *adev = to_acpi_device(dev); + + /* + * Skip device objects with device IDs, because they may be in use even + * if they are not companions of any physical device objects. + */ + if (adev->pnp.type.hardware_id) + return 0; + + mutex_lock(&adev->physical_node_lock); + + /* + * Device objects without device IDs are not in use if they have no + * corresponding physical device objects. + */ + if (list_empty(&adev->physical_node_list)) + acpi_device_set_power(adev, ACPI_STATE_D3_COLD); + + mutex_unlock(&adev->physical_node_lock); + + return 0; +} Index: linux-pm/drivers/acpi/internal.h =================================================================== --- linux-pm.orig/drivers/acpi/internal.h +++ linux-pm/drivers/acpi/internal.h @@ -117,6 +117,7 @@ bool acpi_device_is_battery(struct acpi_ bool acpi_device_is_first_physical_node(struct acpi_device *adev, const struct device *dev); int acpi_bus_register_early_device(int type); +int acpi_dev_turn_off_if_unused(struct device *dev, void *not_used); /* -------------------------------------------------------------------------- Device Matching and Notification