Show patches with: none      |   11170 patches
« 1 2 ... 89 90 91 … 111 112 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[01/19] clk: meson: use dev pointer where possible - - - --- 2018-01-31 Jerome Brunet Not Applicable
[5/5] phy: amlogic: phy-meson-gxl-usb2: rename some of the U2P_R2 registers - - - --- 2018-01-28 Martin Blumenstingl Not Applicable
[4/5] phy: amlogic: phy-meson-gxl-usb2: don't log an error on -EPROBE_DEFER - - - --- 2018-01-28 Martin Blumenstingl Not Applicable
[3/5] phy: amlogic: phy-meson-gxl-usb2: default to host mode - - - --- 2018-01-28 Martin Blumenstingl Not Applicable
[2/5] phy: amlogic: phy-meson-gxl-usb2: support the clock and reset line - - - --- 2018-01-28 Martin Blumenstingl Not Applicable
[1/5] dt-bindings: phy: meson-gxl-usb2-phy: add the reset line and clock - 1 - --- 2018-01-28 Martin Blumenstingl Not Applicable
[v2,2/2] phy: amlogic: add USB3 PHY support for Meson GXL and GXM - - - --- 2018-01-28 Martin Blumenstingl Not Applicable
[v2,1/2] dt-bindings: phy: Add support for the USB3 PHY on Amlogic Meson GXL SoCs - 1 - --- 2018-01-28 Martin Blumenstingl Not Applicable
[3/3] usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG SoCs - - - --- 2018-01-28 Martin Blumenstingl Not Applicable
[2/3] usb: dwc3: of-simple: add support for shared and pulsed reset lines - - - --- 2018-01-28 Martin Blumenstingl Not Applicable
[1/3] dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX - 1 - --- 2018-01-28 Martin Blumenstingl Not Applicable
[RFC] ARM: dts: meson8b-odroidc1: add microSD support - - - --- 2018-01-25 Linus Lüssing Not Applicable
[RFC,usb-next,v8,3/3] usb: core: hcd: integrate the PHY wrapper into the HCD core 2 - - --- 2018-01-25 Martin Blumenstingl Not Applicable
[RFC,usb-next,v8,2/3] usb: core: add a wrapper for the USB PHYs on the HCD - - - --- 2018-01-25 Martin Blumenstingl Not Applicable
[RFC,usb-next,v8,1/3] dt-bindings: usb: add the documentation for USB HCDs - 1 - --- 2018-01-25 Martin Blumenstingl Not Applicable
i2c: meson: update doc description to fix build warnings - - - --- 2018-01-24 Yixun Lan Not Applicable
[RFC,v1] pinctrl: meson: meson8b: fix requesting GPIOs greater than GPIOZ_3 - - - --- 2018-01-24 Martin Blumenstingl Not Applicable
[5/5] drm: Don't pass clip to drm_atomic_helper_check_plane_state() 4 3 - --- 2018-01-23 Ville Syrjälä Not Applicable
[v2,3/3] ARM: dts: meson8: add the USB reset line - 1 - --- 2018-01-21 Martin Blumenstingl Accepted
[v2,2/3] ARM: dts: meson8: add the reset controller - 1 - --- 2018-01-21 Martin Blumenstingl Accepted
[v2,1/3] ARM: dts: meson8b: grow the reset controller memory zone - 1 - --- 2018-01-21 Martin Blumenstingl Accepted
[v2,9/9] clk: meson: axg: add the fractional part of the fixed_pll - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,8/9] clk: meson: gxbb: add the fractional part of the fixed_pll - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,7/9] clk: meson: fix rate calculation of plls with a fractional part - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,6/9] clk: meson: add the gxl hdmi pll - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,5/9] clk: meson: add od3 to the pll driver - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,4/9] clk: meson: use the frac parameter width instead of a constant - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,3/9] clk: meson: remove unnecessary rounding in the pll clock - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,2/9] clk: meson: remove useless pll rate params tables - - - --- 2018-01-19 Jerome Brunet Not Applicable
[v2,1/9] clk: meson: check pll rate param table before using it - - - --- 2018-01-19 Jerome Brunet Not Applicable
clk: meson: add axg misc bit to the mpll driver - - - --- 2018-01-19 Jerome Brunet Not Applicable
clk: meson: axg: fix the od shift of the sys_pll - - - --- 2018-01-19 Yixun Lan Not Applicable
[v2,2/2] ARM: dts: meson8b-odroidc1: ethernet support - 1 1 --- 2018-01-19 Emiliano Ingrassia Accepted
[v2,1/2] ARM: dts: meson8b: extend ethernet controller description - 1 1 --- 2018-01-19 Emiliano Ingrassia Accepted
[9/9] clk: meson: axg: add the fractional part of the fixed_pll - - - --- 2018-01-18 Jerome Brunet Superseded
[8/9] clk: meson: gxbb: add the fractional part of the fixed_pll - - - --- 2018-01-18 Jerome Brunet Superseded
[7/9] clk: meson: fix pll with fractional part calculation - - - --- 2018-01-18 Jerome Brunet Superseded
[6/9] clk: meson: add gxl hdmi pll - - - --- 2018-01-18 Jerome Brunet Superseded
[5/9] clk: meson: add od3 to the pll driver - - - --- 2018-01-18 Jerome Brunet Superseded
[4/9] clk: meson: use frac parameter width instead of a constant - - - --- 2018-01-18 Jerome Brunet Superseded
[3/9] clk: meson: remove unnecessary rounding in the pll clock - - - --- 2018-01-18 Jerome Brunet Superseded
[2/9] clk: meson: remove useless pll rate param tables - - - --- 2018-01-18 Jerome Brunet Superseded
[1/9] clk: meson: check pll rate param table before using it - - - --- 2018-01-18 Jerome Brunet Superseded
pinctrl: meson-axg: adjust uart_ao_b pin group naming - 1 - --- 2018-01-18 Yixun Lan Not Applicable
[2/2] clk: meson: use devm_of_clk_add_hw_provider 1 - - --- 2018-01-18 Jerome Brunet Not Applicable
[1/2] clk: meson: use dev pointer where possible 1 - - --- 2018-01-18 Jerome Brunet Not Applicable
ARM64: dts: meson: accept MAC addr from u-boot environment - - - --- 2018-01-17 Jorge Ramirez-Ortiz Superseded
[v2] ARM64: dts: meson s905x: accept MAC addr from u-boot environment - - 1 --- 2018-01-17 Jorge Ramirez-Ortiz Accepted
ARM64: dts: meson: enable passing MAC addr on u-boot environment - - - --- 2018-01-16 Jorge Ramirez-Ortiz Superseded
pinctrl: meson: axg: fix gpio_ao bank stop pin 1 - - --- 2018-01-16 Jerome Brunet Not Applicable
[2/2] ARM: dts: meson8b-odroidc1: ethernet support - 1 - --- 2018-01-16 Emiliano Ingrassia Superseded
[1/2] ARM: dts: meson8b: extend ethernet controller description - 1 - --- 2018-01-16 Emiliano Ingrassia Superseded
[net-next,v5,4/4] net: stmmac: dwmac-meson8b: propagate rate changes to the parent clock - 1 1 --- 2018-01-15 Martin Blumenstingl Not Applicable
[net-next,v5,3/4] net: stmmac: dwmac-meson8b: fix setting the RGMII TX clock on Meson8b - 1 1 --- 2018-01-15 Martin Blumenstingl Not Applicable
[net-next,v5,2/4] net: stmmac: dwmac-meson8b: fix internal RGMII clock configuration 1 - 1 --- 2018-01-15 Martin Blumenstingl Not Applicable
[net-next,v5,1/4] net: stmmac: dwmac-meson8b: only configure the clocks in RGMII mode - - 1 --- 2018-01-15 Martin Blumenstingl Not Applicable
[v2,01/16] drivers: pwm: core: use a single of xlate function - - - --- 2018-01-15 Claudiu Beznea Not Applicable
[RFT,net-next,v4,5/5] net: stmmac: dwmac-meson8b: propagate rate changes to the parent clock - 1 - --- 2018-01-14 Martin Blumenstingl Not Applicable
[RFT,net-next,v4,4/5] net: stmmac: dwmac-meson8b: fix setting the RGMII TX clock on Meson8b - 1 - --- 2018-01-14 Martin Blumenstingl Not Applicable
[RFT,net-next,v4,3/5] net: stmmac: dwmac-meson8b: fix internal RGMII clock configuration 1 - - --- 2018-01-14 Martin Blumenstingl Not Applicable
[RFT,net-next,v4,2/5] net: stmmac: dwmac-meson8b: simplify generating the clock names - - - --- 2018-01-14 Martin Blumenstingl Not Applicable
[RFT,net-next,v4,1/5] net: stmmac: dwmac-meson8b: only configure the clocks in RGMII mode - - - --- 2018-01-14 Martin Blumenstingl Not Applicable
[v2,16/16] pwm: atmel: add push-pull mode support - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,15/16] pwm: add documentation for pwm push-pull mode - 1 - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,14/16] pwm: add push-pull mode - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,13/16] drivers: pwm: core: add push-pull mode support - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,12/16] pwm: atmel: add pwm capabilities - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,11/16] pwm: add documentation for PWM modes - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,10/16] pwm: Add PWM modes - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,09/16] drivers: pwm: core: add PWM mode to pwm_config() - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,08/16] drivers: pwm: core: extend PWM framework with PWM modes - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,07/16] arm64: dts: rockchip: update pwm-cells - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,06/16] ARM: dts: pxa: update pwm-cells - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,05/16] ARM: dts: clps711x: update pwm-cells - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,04/16] pwm: clps711x: update documentation regarding pwm-cells - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,03/16] pwm: cros-ec: update documentation regarding pwm-cells - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,02/16] pwm: pxa: update documentation regarding pwm-cells - - - --- 2018-01-12 Claudiu Beznea Not Applicable
[v2,01/16] drivers: pwm: core: use a single of xlate function - - - --- 2018-01-12 Claudiu Beznea Not Applicable
ARM64: dts: meson-axg: add RMII pins for ethernet controller 1 - - --- 2018-01-11 Yixun Lan Accepted
[v3,5/5] ARM64: dts: meson-axg: enable the UART_A controller 1 - - --- 2018-01-11 Yixun Lan Accepted
[v3,4/5] ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A 1 - - --- 2018-01-11 Yixun Lan Accepted
[v3,3/5] ARM64: dts: meson-axg: uart: Add the pinctrl info description - - - --- 2018-01-11 Yixun Lan Accepted
[v3,2/5] ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART 1 - - --- 2018-01-11 Yixun Lan Accepted
[v3,1/5] ARM64: dts: meson: uart: fix address space range - 1 - --- 2018-01-11 Yixun Lan Accepted
[v2,2/2] cpufreq: scpi: remove arm_big_little dependency 1 - - --- 2018-01-10 Sudeep Holla Not Applicable
[v2,1/2] drivers: psci: remove cluster terminology and dependency on physical_package_id 1 - - --- 2018-01-10 Sudeep Holla Not Applicable
[-next] meson-gx-socinfo: make local function meson_gx_socinfo_init static 1 - - --- 2018-01-10 Wei Yongjun Accepted
[-next] meson-mx-socinfo: Make local function meson_mx_socinfo_init() static - - - --- 2018-01-10 Wei Yongjun Accepted
[2/2] pinctrl: meson-axg: correct the pin expansion of UART_AO_B - - - --- 2018-01-08 Yixun Lan Rejected
[1/2] pinctrl: meson: introduce a macro to have name/groups seperated - - - --- 2018-01-08 Yixun Lan Rejected
[v2,5/5] ARM64: dts: meson-axg: enable the UART_A controller 1 - - --- 2018-01-06 Yixun Lan Superseded
[v2,4/5] ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A 1 - - --- 2018-01-06 Yixun Lan Superseded
[v2,3/5] ARM64: dts: meson-axg: uart: Add the pinctrl info description - - - --- 2018-01-06 Yixun Lan Superseded
[v2,2/5] ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART 1 - - --- 2018-01-06 Yixun Lan Superseded
[v2,1/5] ARM64: dts: meson: uart: fix address space range - 1 - --- 2018-01-06 Yixun Lan Superseded
[6/6] ARM64: dts: meson-axg: enable the UART_A controller 1 - - --- 2018-01-05 Yixun Lan Superseded
[5/6] arm64: dts: meson-axg: complete the pinctrl info for UART_AO_A 1 - - --- 2018-01-05 Yixun Lan Superseded
[4/6] ARM64: dts: meson-axg: uart: Add the pinctrl info description - - - --- 2018-01-05 Yixun Lan Superseded
[3/6] ARM64: dts: meson-axg: uart: Add the clock info description - - - --- 2018-01-05 Yixun Lan Superseded
[2/6] ARM64: dts: meson-axg: uart: fix address space range - - - --- 2018-01-05 Yixun Lan Superseded
« 1 2 ... 89 90 91 … 111 112 »