diff mbox

[02/13] scpi: Add alternative legacy structures and macros

Message ID 1471515066-3626-3-git-send-email-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show

Commit Message

Neil Armstrong Aug. 18, 2016, 10:10 a.m. UTC 
In order to support the legacy SCPI protocol variant, add back the structures
and macros that varies against the final specification.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
I checked against Amlogic implementation documentation and on-device, the channel selection
via legacy_scpi_get_chan() is needed and fails without it.
The sender_id is not needed so it was dropped.

 drivers/firmware/arm_scpi.c | 84 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

Comments

Sudeep Holla Aug. 18, 2016, 5:16 p.m. UTC | #1 
On 18/08/16 11:10, Neil Armstrong wrote:
> In order to support the legacy SCPI protocol variant, add back the structures
> and macros that varies against the final specification.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> I checked against Amlogic implementation documentation and on-device, the channel selection
> via legacy_scpi_get_chan() is needed and fails without it.
> The sender_id is not needed so it was dropped.
>
>  drivers/firmware/arm_scpi.c | 84 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 84 insertions(+)
>
> diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
> index 403783a..0bb6134 100644
> --- a/drivers/firmware/arm_scpi.c
> +++ b/drivers/firmware/arm_scpi.c

[...]

> @@ -183,6 +224,11 @@ struct scpi_shared_mem {
>  	u8 payload[0];
>  } __packed;
>
> +struct legacy_scpi_shared_mem {
> +	__le32 status;
> +	u8 payload[0];
> +} __packed;
> +
>  struct scp_capabilities {
>  	__le32 protocol_version;
>  	__le32 event_version;
> @@ -208,6 +254,12 @@ struct clk_set_value {
>  	__le32 rate;
>  } __packed;
>
> +struct legacy_clk_set_value {
> +	__le32 rate;
> +	__le16 id;
> +	__le16 reserved;
> +} __packed;
> +
>  struct dvfs_info {
>  	__le32 header;
>  	struct {
> @@ -237,6 +289,10 @@ struct sensor_value {
>  	__le32 hi_val;
>  } __packed;
>
> +struct legacy_sensor_value {
> +	__le32 val;
> +} __packed;
> +

Not required, new one is backward compatible. Otherwise this patch looks
fine.
Neil Armstrong Aug. 23, 2016, 8:09 a.m. UTC | #2 
On 08/18/2016 07:16 PM, Sudeep Holla wrote:
> 
> 
> On 18/08/16 11:10, Neil Armstrong wrote:
>> In order to support the legacy SCPI protocol variant, add back the structures
>> and macros that varies against the final specification.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> I checked against Amlogic implementation documentation and on-device, the channel selection
>> via legacy_scpi_get_chan() is needed and fails without it.
>> The sender_id is not needed so it was dropped.
>>
>>  drivers/firmware/arm_scpi.c | 84 +++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 84 insertions(+)
>>
>> diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
>> index 403783a..0bb6134 100644
>> --- a/drivers/firmware/arm_scpi.c
>> +++ b/drivers/firmware/arm_scpi.c
> 
> [...]
> 
>> @@ -183,6 +224,11 @@ struct scpi_shared_mem {
>>      u8 payload[0];
>>  } __packed;
>>
>> +struct legacy_scpi_shared_mem {
>> +    __le32 status;
>> +    u8 payload[0];
>> +} __packed;
>> +
>>  struct scp_capabilities {
>>      __le32 protocol_version;
>>      __le32 event_version;
>> @@ -208,6 +254,12 @@ struct clk_set_value {
>>      __le32 rate;
>>  } __packed;
>>
>> +struct legacy_clk_set_value {
>> +    __le32 rate;
>> +    __le16 id;
>> +    __le16 reserved;
>> +} __packed;
>> +
>>  struct dvfs_info {
>>      __le32 header;
>>      struct {
>> @@ -237,6 +289,10 @@ struct sensor_value {
>>      __le32 hi_val;
>>  } __packed;
>>
>> +struct legacy_sensor_value {
>> +    __le32 val;
>> +} __packed;
>> +
> 
> Not required, new one is backward compatible. Otherwise this patch looks
> fine.

Indeed, will use the non-legacy structure.

Thanks,
Neil
diff mbox

Patch

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 403783a..0bb6134 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -52,6 +52,8 @@ 
 #define CMD_TOKEN_ID_MASK	0xff
 #define CMD_DATA_SIZE_SHIFT	16
 #define CMD_DATA_SIZE_MASK	0x1ff
+#define CMD_LEGACY_DATA_SIZE_SHIFT	20
+#define CMD_LEGACY_DATA_SIZE_MASK	0x1ff
 #define PACK_SCPI_CMD(cmd_id, tx_sz)			\
 	((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) |	\
 	(((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
@@ -61,6 +63,9 @@ 
 	(((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
 #define ADD_SCPI_TOKEN(cmd, token)			\
 	((cmd) |= (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT))
+#define PACK_LEGACY_SCPI_CMD(cmd_id, tx_sz)				\
+	((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) |			       \
+	(((tx_sz) & CMD_LEGACY_DATA_SIZE_MASK) << CMD_LEGACY_DATA_SIZE_SHIFT))
 
 #define CMD_SIZE(cmd)	(((cmd) >> CMD_DATA_SIZE_SHIFT) & CMD_DATA_SIZE_MASK)
 #define CMD_UNIQ_MASK	(CMD_TOKEN_ID_MASK << CMD_TOKEN_ID_SHIFT | CMD_ID_MASK)
@@ -138,6 +143,42 @@  enum scpi_std_cmd {
 	SCPI_CMD_COUNT
 };
 
+enum legacy_scpi_std_cmd {
+	LEGACY_SCPI_CMD_INVALID			= 0x00,
+	LEGACY_SCPI_CMD_SCPI_READY		= 0x01,
+	LEGACY_SCPI_CMD_SCPI_CAPABILITIES	= 0x02,
+	LEGACY_SCPI_CMD_EVENT			= 0x03,
+	LEGACY_SCPI_CMD_SET_CSS_PWR_STATE	= 0x04,
+	LEGACY_SCPI_CMD_GET_CSS_PWR_STATE	= 0x05,
+	LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT	= 0x06,
+	LEGACY_SCPI_CMD_GET_PWR_STATE_STAT	= 0x07,
+	LEGACY_SCPI_CMD_SYS_PWR_STATE		= 0x08,
+	LEGACY_SCPI_CMD_L2_READY		= 0x09,
+	LEGACY_SCPI_CMD_SET_AP_TIMER		= 0x0a,
+	LEGACY_SCPI_CMD_CANCEL_AP_TIME		= 0x0b,
+	LEGACY_SCPI_CMD_DVFS_CAPABILITIES	= 0x0c,
+	LEGACY_SCPI_CMD_GET_DVFS_INFO		= 0x0d,
+	LEGACY_SCPI_CMD_SET_DVFS		= 0x0e,
+	LEGACY_SCPI_CMD_GET_DVFS		= 0x0f,
+	LEGACY_SCPI_CMD_GET_DVFS_STAT		= 0x10,
+	LEGACY_SCPI_CMD_SET_RTC			= 0x11,
+	LEGACY_SCPI_CMD_GET_RTC			= 0x12,
+	LEGACY_SCPI_CMD_CLOCK_CAPABILITIES	= 0x13,
+	LEGACY_SCPI_CMD_SET_CLOCK_INDEX		= 0x14,
+	LEGACY_SCPI_CMD_SET_CLOCK_VALUE		= 0x15,
+	LEGACY_SCPI_CMD_GET_CLOCK_VALUE		= 0x16,
+	LEGACY_SCPI_CMD_PSU_CAPABILITIES	= 0x17,
+	LEGACY_SCPI_CMD_SET_PSU			= 0x18,
+	LEGACY_SCPI_CMD_GET_PSU			= 0x19,
+	LEGACY_SCPI_CMD_SENSOR_CAPABILITIES	= 0x1a,
+	LEGACY_SCPI_CMD_SENSOR_INFO		= 0x1b,
+	LEGACY_SCPI_CMD_SENSOR_VALUE		= 0x1c,
+	LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC	= 0x1d,
+	LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS	= 0x1e,
+	LEGACY_SCPI_CMD_SENSOR_ASYNC_VALUE	= 0x1f,
+	LEGACY_SCPI_CMD_COUNT
+};
+
 struct scpi_xfer {
 	u32 slot; /* has to be first element */
 	u32 cmd;
@@ -183,6 +224,11 @@  struct scpi_shared_mem {
 	u8 payload[0];
 } __packed;
 
+struct legacy_scpi_shared_mem {
+	__le32 status;
+	u8 payload[0];
+} __packed;
+
 struct scp_capabilities {
 	__le32 protocol_version;
 	__le32 event_version;
@@ -208,6 +254,12 @@  struct clk_set_value {
 	__le32 rate;
 } __packed;
 
+struct legacy_clk_set_value {
+	__le32 rate;
+	__le16 id;
+	__le16 reserved;
+} __packed;
+
 struct dvfs_info {
 	__le32 header;
 	struct {
@@ -237,6 +289,10 @@  struct sensor_value {
 	__le32 hi_val;
 } __packed;
 
+struct legacy_sensor_value {
+	__le32 val;
+} __packed;
+
 struct dev_pstate_set {
 	u16 dev_id;
 	u8 pstate;
@@ -328,6 +384,34 @@  static void scpi_tx_prepare(struct mbox_client *c, void *msg)
 	mem->command = cpu_to_le32(t->cmd);
 }
 
+static int legacy_high_priority_cmds[] = {
+	LEGACY_SCPI_CMD_GET_CSS_PWR_STATE,
+	LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT,
+	LEGACY_SCPI_CMD_GET_PWR_STATE_STAT,
+	LEGACY_SCPI_CMD_SET_DVFS,
+	LEGACY_SCPI_CMD_GET_DVFS,
+	LEGACY_SCPI_CMD_SET_RTC,
+	LEGACY_SCPI_CMD_GET_RTC,
+	LEGACY_SCPI_CMD_SET_CLOCK_INDEX,
+	LEGACY_SCPI_CMD_SET_CLOCK_VALUE,
+	LEGACY_SCPI_CMD_GET_CLOCK_VALUE,
+	LEGACY_SCPI_CMD_SET_PSU,
+	LEGACY_SCPI_CMD_GET_PSU,
+	LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC,
+	LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS,
+};
+
+static int legacy_scpi_get_chan(u8 cmd)
+{
+	int idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(legacy_high_priority_cmds); idx++)
+		if (cmd == legacy_high_priority_cmds[idx])
+			return 1;
+
+	return 0;
+}
+
 static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch)
 {
 	struct scpi_xfer *t;