@@ -126,7 +126,9 @@ config PINCTRL_MESON
select PINCONF
select GENERIC_PINCONF
select GPIOLIB
+ select IRQ_DOMAIN
select OF_GPIO
+ select OF_IRQ
select REGMAP_MMIO
config PINCTRL_OXNAS
@@ -50,6 +50,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>
@@ -481,6 +482,58 @@ static void meson_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
value ? BIT(bit) : 0);
}
+static int meson_gpio_to_hwirq(struct meson_bank *bank, unsigned int offset)
+{
+ unsigned int hwirq;
+
+ if (bank->irq_first < 0)
+ /* this bank cannot generate irqs */
+ return -1;
+
+ hwirq = offset - bank->first + bank->irq_first;
+
+ if (hwirq > bank->irq_last)
+ /* this pin cannot generate irqs */
+ return -1;
+
+ return hwirq;
+}
+
+static int meson_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct meson_pinctrl *pc = gpiochip_get_data(chip);
+ struct meson_bank *bank;
+ struct irq_fwspec fwspec;
+ unsigned int hwirq;
+ int ret;
+
+ ret = meson_get_bank(pc, offset, &bank);
+ if (ret)
+ return ret;
+
+ /*
+ * The interrupt controller might be missing, in such case we can't
+ * provide an interrupt for a pin
+ */
+ if (is_fwnode_irqchip(pc->fwnode)) {
+ dev_info(pc->dev, "interrupt controller not found\n");
+ return 0;
+ }
+
+ hwirq = meson_gpio_to_hwirq(bank, offset);
+ if (hwirq < 0) {
+ dev_dbg(pc->dev, "no interrupt for pin %u\n", offset);
+ return 0;
+ }
+
+ fwspec.fwnode = pc->fwnode;
+ fwspec.param_count = 2;
+ fwspec.param[0] = hwirq;
+ fwspec.param[1] = IRQ_TYPE_NONE;
+
+ return irq_create_fwspec_mapping(&fwspec);
+}
+
static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio)
{
struct meson_pinctrl *pc = gpiochip_get_data(chip);
@@ -539,6 +592,7 @@ static int meson_gpiolib_register(struct meson_pinctrl *pc)
pc->chip.direction_output = meson_gpio_direction_output;
pc->chip.get = meson_gpio_get;
pc->chip.set = meson_gpio_set;
+ pc->chip.to_irq = meson_gpio_to_irq;
pc->chip.base = pc->data->pin_base;
pc->chip.ngpio = pc->data->num_pins;
pc->chip.can_sleep = false;
@@ -598,6 +652,19 @@ static struct regmap *meson_map_resource(struct meson_pinctrl *pc,
return devm_regmap_init_mmio(pc->dev, base, &meson_regmap_config);
}
+static void meson_pinctrl_get_irq_gpio_intc(struct meson_pinctrl *pc,
+ struct device_node *node)
+{
+ struct device_node *np = of_irq_find_parent(node);
+
+ if (!np || !of_device_is_compatible(np, pc->data->irq_compat)) {
+ dev_info(pc->dev, "gpio interrupt disabled\n");
+ pc->fwnode = NULL;
+ } else {
+ pc->fwnode = of_node_to_fwnode(np);
+ }
+}
+
static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc,
struct device_node *node)
{
@@ -643,6 +710,8 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc,
return PTR_ERR(pc->reg_gpio);
}
+ meson_pinctrl_get_irq_gpio_intc(pc, gpio_np);
+
return 0;
}
@@ -123,6 +123,7 @@ struct meson_pinctrl {
struct regmap *reg_gpio;
struct gpio_chip chip;
struct device_node *of_node;
+ struct fwnode_handle *fwnode;
};
#define PIN(x, b) (b + x)
Add the ability for gpio to request irq from the gpio interrupt controller if present. We have to specificaly that the parent interrupt controller is the gpio interrupt controller because gpio on meson SoCs can't generate interrupt directly on the GIC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- I messed up in v2 and actually sent the v1 again. Here is the actual v2 with the fix. Again, sorry for the inconvenience. drivers/pinctrl/Kconfig | 2 + drivers/pinctrl/meson/pinctrl-meson.c | 69 +++++++++++++++++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson.h | 1 + 3 files changed, 72 insertions(+)