Message ID | 1495549311-23660-3-git-send-email-narmstrong@baylibre.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote: > The pull-enable register base was wrongly copied from the GXBB pinctrl node, > but was not used yet. Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> > > Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes") > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > index 4871ce5..57fe1f5 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > @@ -239,7 +239,7 @@ > gpio: bank@4b0 { > reg = <0x0 0x004b0 0x0 0x28>, > <0x0 0x004e8 0x0 0x14>, > - <0x0 0x00120 0x0 0x14>, > + <0x0 0x00520 0x0 0x14>, > <0x0 0x00430 0x0 0x40>; > reg-names = "mux", "pull", "pull-enable", "gpio"; > gpio-controller;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 4871ce5..57fe1f5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -239,7 +239,7 @@ gpio: bank@4b0 { reg = <0x0 0x004b0 0x0 0x28>, <0x0 0x004e8 0x0 0x14>, - <0x0 0x00120 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, <0x0 0x00430 0x0 0x40>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller;
The pull-enable register base was wrongly copied from the GXBB pinctrl node, but was not used yet. Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)