diff mbox

[v4,4/7] ARM: dts: meson: use meson6 UART compatible like other nodes

Message ID 1497001756-942-5-git-send-email-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show

Commit Message

Neil Armstrong June 9, 2017, 9:49 a.m. UTC 
The UART bindings needs specifying a SoC family, use the meson6 family
for the UART nodes like the other nodes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm/boot/dts/meson.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 8d9c369..ecc9330 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -79,14 +79,14 @@ 
 			ranges = <0x0 0xc1100000 0x200000>;
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <0 26 1>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <0 75 1>;
 				status = "disabled";
@@ -102,7 +102,7 @@ 
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <0 93 1>;
 				status = "disabled";
@@ -153,7 +153,7 @@ 
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <0 90 1>;
 				status = "disabled";