diff mbox

[u-boot,v3,3/5] board: p212: use common ethernet init function

Message ID 1511774180-22672-4-git-send-email-narmstrong@baylibre.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Neil Armstrong Nov. 27, 2017, 9:16 a.m. UTC 
Switch P212 Ethernet init to the common Ethernet init function.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 board/amlogic/p212/p212.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

Comments

Tom Rini Dec. 4, 2017, 6:36 p.m. UTC | #1 
On Mon, Nov 27, 2017 at 10:16:18AM +0100, Neil Armstrong wrote:

> Switch P212 Ethernet init to the common Ethernet init function.
> 
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Applied to u-boot/master, thanks!
diff mbox

Patch

diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c
index ece8096..2b6d88a 100644
--- a/board/amlogic/p212/p212.c
+++ b/board/amlogic/p212/p212.c
@@ -10,7 +10,7 @@ 
 #include <asm/io.h>
 #include <asm/arch/gxbb.h>
 #include <asm/arch/sm.h>
-#include <phy.h>
+#include <asm/arch/eth.h>
 
 #define EFUSE_SN_OFFSET		20
 #define EFUSE_SN_SIZE		16
@@ -28,17 +28,7 @@  int misc_init_r(void)
 	char serial[EFUSE_SN_SIZE];
 	ssize_t len;
 
-	/* Set RMII mode */
-	out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
-				 GXBB_ETH_REG_0_CLK_EN);
-
-	/* Use Internal PHY */
-	out_le32(GXBB_ETH_REG_2, 0x10110181);
-	out_le32(GXBB_ETH_REG_3, 0xe40908ff);
-
-	/* Enable power and clock gate */
-	setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
-	clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+	meson_gx_eth_init(PHY_INTERFACE_MODE_RMII, 0);
 
 	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
 		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,