[u-boot,16/19] clk: Add clock driver for AXG

Message ID	1541777218-472-17-git-send-email-narmstrong@baylibre.com (mailing list archive)
State	Superseded
Headers	show Return-Path: <linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org> From: Neil Armstrong <narmstrong@baylibre.com> To: u-boot@lists.denx.de Subject: [PATCH u-boot 16/19] clk: Add clock driver for AXG Date: Fri, 9 Nov 2018 16:26:55 +0100 Message-Id: <1541777218-472-17-git-send-email-narmstrong@baylibre.com> In-Reply-To: <1541777218-472-1-git-send-email-narmstrong@baylibre.com> References: <1541777218-472-1-git-send-email-narmstrong@baylibre.com> Precedence: list Cc: linux-amlogic@lists.infradead.org, trini@konsulko.com, Neil Armstrong <narmstrong@baylibre.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-amlogic" <linux-amlogic-bounces@lists.infradead.org> Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org
Series	Amlogic Meson cleanup for AXG SoC support \| expand [u-boot,00/19] Amlogic Meson cleanup for AXG SoC support [u-boot,01/19] ARM: meson: clean-up platform selection [u-boot,02/19] configs: meson: remove unnecessary MESON_FDTFILE_SETTING [u-boot,03/19] board: amlogic: remove p212 derivatives [u-boot,04/19] board: amlogic: move khadas-vim2 as q200 ref board [u-boot,05/19] board: amlogic: factorise gxbb boards [u-boot,06/19] ARM: rework amlogic configuration [u-boot,07/19] configs: meson: change default load addresses [u-boot,08/19] pinctrl: meson: rework gx pmx function [u-boot,09/19] pinctrl: meson: select generic pinctrl [u-boot,10/19] pinctrl: meson: add axg support [u-boot,11/19] clk: meson: add static to meson_gates table [u-boot,12/19] clk: meson: silence debug print [u-boot,13/19] ARM: meson: rework soc arch file to prepare for new SoC [u-boot,14/19] ARM: meson: Add support for AXG family [u-boot,15/19] ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 [u-boot,16/19] clk: Add clock driver for AXG [u-boot,17/19] board: amlogic: add support for S400 board [u-boot,18/19] ARM: meson: factorize common code out amlogic's boards [u-boot,19/19] ARM: meson: Add boot device discovery

diff --git a/arch/arm/include/asm/arch-meson/clock-axg.h b/arch/arm/include/asm/arch-meson/clock-axg.h new file mode 100644 index 0000000..1ef88e4 --- /dev/null +++ b/arch/arm/include/asm/arch-meson/clock-axg.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2016 - AmLogic, Inc. + * Copyright 2018 - Beniamino Galvani <b.galvani@gmail.com> + * Copyright 2018 - BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ +#ifndef _ARCH_MESON_CLOCK_AXG_H_ +#define _ARCH_MESON_CLOCK_AXG_H_ + +/* + * Clock controller register offsets + * + * Register offsets from the data sheet are listed in comment blocks below. + * Those offsets must be multiplied by 4 before adding them to the base address + * to get the right value + */ +#define HHI_GP0_PLL_CNTL 0x40 +#define HHI_GP0_PLL_CNTL2 0x44 +#define HHI_GP0_PLL_CNTL3 0x48 +#define HHI_GP0_PLL_CNTL4 0x4c +#define HHI_GP0_PLL_CNTL5 0x50 +#define HHI_GP0_PLL_STS 0x54 +#define HHI_GP0_PLL_CNTL1 0x58 +#define HHI_HIFI_PLL_CNTL 0x80 +#define HHI_HIFI_PLL_CNTL2 0x84 +#define HHI_HIFI_PLL_CNTL3 0x88 +#define HHI_HIFI_PLL_CNTL4 0x8C +#define HHI_HIFI_PLL_CNTL5 0x90 +#define HHI_HIFI_PLL_STS 0x94 +#define HHI_HIFI_PLL_CNTL1 0x98 + +#define HHI_XTAL_DIVN_CNTL 0xbc +#define HHI_GCLK2_MPEG0 0xc0 +#define HHI_GCLK2_MPEG1 0xc4 +#define HHI_GCLK2_MPEG2 0xc8 +#define HHI_GCLK2_OTHER 0xd0 +#define HHI_GCLK2_AO 0xd4 +#define HHI_PCIE_PLL_CNTL 0xd8 +#define HHI_PCIE_PLL_CNTL1 0xdC +#define HHI_PCIE_PLL_CNTL2 0xe0 +#define HHI_PCIE_PLL_CNTL3 0xe4 +#define HHI_PCIE_PLL_CNTL4 0xe8 +#define HHI_PCIE_PLL_CNTL5 0xec +#define HHI_PCIE_PLL_CNTL6 0xf0 +#define HHI_PCIE_PLL_STS 0xf4 + +#define HHI_MEM_PD_REG0 0x100 +#define HHI_VPU_MEM_PD_REG0 0x104 +#define HHI_VIID_CLK_DIV 0x128 +#define HHI_VIID_CLK_CNTL 0x12c + +#define HHI_GCLK_MPEG0 0x140 +#define HHI_GCLK_MPEG1 0x144 +#define HHI_GCLK_MPEG2 0x148 +#define HHI_GCLK_OTHER 0x150 +#define HHI_GCLK_AO 0x154 +#define HHI_SYS_CPU_CLK_CNTL1 0x15c +#define HHI_SYS_CPU_RESET_CNTL 0x160 +#define HHI_VID_CLK_DIV 0x164 +#define HHI_SPICC_HCLK_CNTL 0x168 + +#define HHI_MPEG_CLK_CNTL 0x174 +#define HHI_VID_CLK_CNTL 0x17c +#define HHI_TS_CLK_CNTL 0x190 +#define HHI_VID_CLK_CNTL2 0x194 +#define HHI_SYS_CPU_CLK_CNTL0 0x19c +#define HHI_VID_PLL_CLK_DIV 0x1a0 +#define HHI_VPU_CLK_CNTL 0x1bC + +#define HHI_VAPBCLK_CNTL 0x1F4 + +#define HHI_GEN_CLK_CNTL 0x228 + +#define HHI_VDIN_MEAS_CLK_CNTL 0x250 +#define HHI_NAND_CLK_CNTL 0x25C +#define HHI_SD_EMMC_CLK_CNTL 0x264 + +#define HHI_MPLL_CNTL 0x280 +#define HHI_MPLL_CNTL2 0x284 +#define HHI_MPLL_CNTL3 0x288 +#define HHI_MPLL_CNTL4 0x28C +#define HHI_MPLL_CNTL5 0x290 +#define HHI_MPLL_CNTL6 0x294 +#define HHI_MPLL_CNTL7 0x298 +#define HHI_MPLL_CNTL8 0x29C +#define HHI_MPLL_CNTL9 0x2A0 +#define HHI_MPLL_CNTL10 0x2A4 + +#define HHI_MPLL3_CNTL0 0x2E0 +#define HHI_MPLL3_CNTL1 0x2E4 +#define HHI_PLL_TOP_MISC 0x2E8 + +#define HHI_SYS_PLL_CNTL1 0x2FC +#define HHI_SYS_PLL_CNTL 0x300 +#define HHI_SYS_PLL_CNTL2 0x304 +#define HHI_SYS_PLL_CNTL3 0x308 +#define HHI_SYS_PLL_CNTL4 0x30c +#define HHI_SYS_PLL_CNTL5 0x310 +#define HHI_SYS_PLL_STS 0x314 +#define HHI_DPLL_TOP_I 0x318 +#define HHI_DPLL_TOP2_I 0x31C + +#endif diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 821b586..a696245 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o clk_fixed_rate.o obj-y += imx/ obj-y += tegra/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ -obj-$(CONFIG_ARCH_MESON) += clk_meson.o +obj-$(CONFIG_ARCH_MESON) += clk_meson.o clk_meson_axg.o obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_ARCH_SOCFPGA) += altera/ obj-$(CONFIG_CLK_AT91) += at91/ diff --git a/drivers/clk/clk_meson_axg.c b/drivers/clk/clk_meson_axg.c new file mode 100644 index 0000000..32cbf75 --- /dev/null +++ b/drivers/clk/clk_meson_axg.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2018 - Beniamino Galvani <b.galvani@gmail.com> + * (C) Copyright 2018 - BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <common.h> +#include <asm/arch/clock-axg.h> +#include <asm/io.h> +#include <clk-uclass.h> +#include <dm.h> +#include <regmap.h> +#include <syscon.h> +#include <div64.h> +#include <dt-bindings/clock/axg-clkc.h> +#include "clk_meson.h" + +#define XTAL_RATE 24000000 + +struct meson_clk { + struct regmap *map; +}; + +static ulong meson_clk_get_rate_by_id(struct clk *clk, unsigned long id); + +static struct meson_gate gates[] = { + /* Everything Else (EE) domain gates */ + MESON_GATE(CLKID_SPICC0, HHI_GCLK_MPEG0, 8), + MESON_GATE(CLKID_I2C, HHI_GCLK_MPEG0, 9), + MESON_GATE(CLKID_UART0, HHI_GCLK_MPEG0, 13), + MESON_GATE(CLKID_SPICC1, HHI_GCLK_MPEG0, 15), + MESON_GATE(CLKID_SD_EMMC_B, HHI_GCLK_MPEG0, 25), + MESON_GATE(CLKID_SD_EMMC_C, HHI_GCLK_MPEG0, 26), + MESON_GATE(CLKID_ETH, HHI_GCLK_MPEG1, 3), + MESON_GATE(CLKID_UART1, HHI_GCLK_MPEG1, 16), + + /* Always On (AO) domain gates */ + MESON_GATE(CLKID_AO_I2C, HHI_GCLK_AO, 4), + + /* PLL Gates */ + /* CLKID_FCLK_DIV2 is critical for the SCPI Processor */ + MESON_GATE(CLKID_MPLL2, HHI_MPLL_CNTL9, 14), + /* CLKID_CLK81 is critical for the system */ + + /* Peripheral Gates */ + MESON_GATE(CLKID_SD_EMMC_B_CLK0, HHI_SD_EMMC_CLK_CNTL, 23), + MESON_GATE(CLKID_SD_EMMC_C_CLK0, HHI_NAND_CLK_CNTL, 7), +}; + +static int meson_set_gate(struct clk *clk, bool on) +{ + struct meson_clk *priv = dev_get_priv(clk->dev); + struct meson_gate *gate; + + if (clk->id >= ARRAY_SIZE(gates)) + return -ENOENT; + + gate = &gates[clk->id]; + + if (gate->reg == 0) + return 0; + + regmap_update_bits(priv->map, gate->reg, + BIT(gate->bit), on ? BIT(gate->bit) : 0); + + return 0; +} + +static int meson_clk_enable(struct clk *clk) +{ + return meson_set_gate(clk, true); +} + +static int meson_clk_disable(struct clk *clk) +{ + return meson_set_gate(clk, false); +} + +static unsigned long meson_clk81_get_rate(struct clk *clk) +{ + struct meson_clk *priv = dev_get_priv(clk->dev); + unsigned long parent_rate; + uint reg; + int parents[] = { + -1, + -1, + CLKID_FCLK_DIV7, + CLKID_MPLL1, + CLKID_MPLL2, + CLKID_FCLK_DIV4, + CLKID_FCLK_DIV3, + CLKID_FCLK_DIV5 + }; + + /* mux */ + regmap_read(priv->map, HHI_MPEG_CLK_CNTL, &reg); + reg = (reg >> 12) & 7; + + switch (reg) { + case 0: + parent_rate = XTAL_RATE; + break; + case 1: + return -ENOENT; + default: + parent_rate = meson_clk_get_rate_by_id(clk, parents[reg]); + } + + /* divider */ + regmap_read(priv->map, HHI_MPEG_CLK_CNTL, &reg); + reg = reg & ((1 << 7) - 1); + + return parent_rate / reg; +} + +static long mpll_rate_from_params(unsigned long parent_rate, + unsigned long sdm, + unsigned long n2) +{ + unsigned long divisor = (SDM_DEN * n2) + sdm; + + if (n2 < N2_MIN) + return -EINVAL; + + return DIV_ROUND_UP_ULL((u64)parent_rate * SDM_DEN, divisor); +} + +static struct parm meson_mpll0_parm[3] = { + {HHI_MPLL_CNTL7, 0, 14}, /* psdm */ + {HHI_MPLL_CNTL7, 16, 9}, /* pn2 */ +}; + +static struct parm meson_mpll1_parm[3] = { + {HHI_MPLL_CNTL8, 0, 14}, /* psdm */ + {HHI_MPLL_CNTL8, 16, 9}, /* pn2 */ +}; + +static struct parm meson_mpll2_parm[3] = { + {HHI_MPLL_CNTL9, 0, 14}, /* psdm */ + {HHI_MPLL_CNTL9, 16, 9}, /* pn2 */ +}; + +/* + * MultiPhase Locked Loops are outputs from a PLL with additional frequency + * scaling capabilities. MPLL rates are calculated as: + * + * f(N2_integer, SDM_IN ) = 2.0G/(N2_integer + SDM_IN/16384) + */ +static ulong meson_mpll_get_rate(struct clk *clk, unsigned long id) +{ + struct meson_clk *priv = dev_get_priv(clk->dev); + struct parm *psdm, *pn2; + unsigned long sdm, n2; + unsigned long parent_rate; + uint reg; + + switch (id) { + case CLKID_MPLL0: + psdm = &meson_mpll0_parm[0]; + pn2 = &meson_mpll0_parm[1]; + break; + case CLKID_MPLL1: + psdm = &meson_mpll1_parm[0]; + pn2 = &meson_mpll1_parm[1]; + break; + case CLKID_MPLL2: + psdm = &meson_mpll2_parm[0]; + pn2 = &meson_mpll2_parm[1]; + break; + default: + return -ENOENT; + } + + parent_rate = meson_clk_get_rate_by_id(clk, CLKID_FIXED_PLL); + if (IS_ERR_VALUE(parent_rate)) + return parent_rate; + + regmap_read(priv->map, psdm->reg_off, &reg); + sdm = PARM_GET(psdm->width, psdm->shift, reg); + + regmap_read(priv->map, pn2->reg_off, &reg); + n2 = PARM_GET(pn2->width, pn2->shift, reg); + + return mpll_rate_from_params(parent_rate, sdm, n2); +} + +static struct parm meson_fixed_pll_parm[3] = { + {HHI_MPLL_CNTL, 0, 9}, /* pm */ + {HHI_MPLL_CNTL, 9, 5}, /* pn */ + {HHI_MPLL_CNTL, 16, 2}, /* pod */ +}; + +static struct parm meson_sys_pll_parm[3] = { + {HHI_SYS_PLL_CNTL, 0, 9}, /* pm */ + {HHI_SYS_PLL_CNTL, 9, 5}, /* pn */ + {HHI_SYS_PLL_CNTL, 16, 2}, /* pod */ +}; + +static ulong meson_pll_get_rate(struct clk *clk, unsigned long id) +{ + struct meson_clk *priv = dev_get_priv(clk->dev); + struct parm *pm, *pn, *pod; + unsigned long parent_rate_mhz = XTAL_RATE / 1000000; + u16 n, m, od; + uint reg; + + switch (id) { + case CLKID_FIXED_PLL: + pm = &meson_fixed_pll_parm[0]; + pn = &meson_fixed_pll_parm[1]; + pod = &meson_fixed_pll_parm[2]; + break; + case CLKID_SYS_PLL: + pm = &meson_sys_pll_parm[0]; + pn = &meson_sys_pll_parm[1]; + pod = &meson_sys_pll_parm[2]; + break; + default: + return -ENOENT; + } + + regmap_read(priv->map, pn->reg_off, &reg); + n = PARM_GET(pn->width, pn->shift, reg); + + regmap_read(priv->map, pm->reg_off, &reg); + m = PARM_GET(pm->width, pm->shift, reg); + + regmap_read(priv->map, pod->reg_off, &reg); + od = PARM_GET(pod->width, pod->shift, reg); + + return ((parent_rate_mhz * m / n) >> od) * 1000000; +} + +static ulong meson_clk_get_rate_by_id(struct clk *clk, unsigned long id) +{ + ulong rate; + + switch (id) { + case CLKID_FIXED_PLL: + case CLKID_SYS_PLL: + rate = meson_pll_get_rate(clk, id); + break; + case CLKID_FCLK_DIV2: + rate = meson_pll_get_rate(clk, CLKID_FIXED_PLL) / 2; + break; + case CLKID_FCLK_DIV3: + rate = meson_pll_get_rate(clk, CLKID_FIXED_PLL) / 3; + break; + case CLKID_FCLK_DIV4: + rate = meson_pll_get_rate(clk, CLKID_FIXED_PLL) / 4; + break; + case CLKID_FCLK_DIV5: + rate = meson_pll_get_rate(clk, CLKID_FIXED_PLL) / 5; + break; + case CLKID_FCLK_DIV7: + rate = meson_pll_get_rate(clk, CLKID_FIXED_PLL) / 7; + break; + case CLKID_MPLL0: + case CLKID_MPLL1: + case CLKID_MPLL2: + rate = meson_mpll_get_rate(clk, id); + break; + case CLKID_CLK81: + rate = meson_clk81_get_rate(clk); + break; + default: + if (gates[id].reg != 0) { + /* a clock gate */ + rate = meson_clk81_get_rate(clk); + break; + } + return -ENOENT; + } + + debug("clock %lu has rate %lu\n", id, rate); + return rate; +} + +static ulong meson_clk_get_rate(struct clk *clk) +{ + return meson_clk_get_rate_by_id(clk, clk->id); +} + +static int meson_clk_probe(struct udevice *dev) +{ + struct meson_clk *priv = dev_get_priv(dev); + + priv->map = syscon_node_to_regmap(dev_get_parent(dev)->node); + if (IS_ERR(priv->map)) + return PTR_ERR(priv->map); + + debug("meson-clk-axg: probed\n"); + + return 0; +} + +static struct clk_ops meson_clk_ops = { + .disable = meson_clk_disable, + .enable = meson_clk_enable, + .get_rate = meson_clk_get_rate, +}; + +static const struct udevice_id meson_clk_ids[] = { + { .compatible = "amlogic,axg-clkc" }, + { } +}; + +U_BOOT_DRIVER(meson_clk_axg) = { + .name = "meson_clk_axg", + .id = UCLASS_CLK, + .of_match = meson_clk_ids, + .priv_auto_alloc_size = sizeof(struct meson_clk), + .ops = &meson_clk_ops, + .probe = meson_clk_probe, +};

[u-boot,16/19] clk: Add clock driver for AXG

Commit Message

Patch