diff mbox series

[u-boot,19/19] ARM: meson: Add boot device discovery

Message ID 1541777218-472-20-git-send-email-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show
Series Amlogic Meson cleanup for AXG SoC support | expand

Commit Message

Neil Armstrong Nov. 9, 2018, 3:26 p.m. UTC 
The Amlogic Meson SoCs ROM supports a boot over USB with a custom protocol.

When no other boot medium are available (or by forcing the USB mode), the
ROM sets the primary USB port as device mode and waits for a Host to
enumerate.

When enumerated, a custom protocol described at [1] permits writing to
memory and execution some specific FIP init code to run the loaded
Arm Trusted Firmware BL2 and BL3 staged before running the BL33 stage.

In this mode, we can load different binaries that can be used by U-boot
like a script image file.

This adds support for a custom USB boot stage only available when the
boot mode is USB and the script file at a pre-defined address is valid.
This support was heavily copied from the Sunxi Allwinner FEL U-Boot support.

The tool pyamlboot described at [2], permits using this boot mode on boards
exposing the first USB port, either as OTG or Host port.

[1] https://github.com/superna9999/pyamlboot/blob/master/PROTOCOL.md
[2] https://github.com/superna9999/pyamlboot/blob/master/README.md

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm/include/asm/arch-meson/axg.h  |  1 +
 arch/arm/include/asm/arch-meson/boot.h | 20 +++++++++++++++
 arch/arm/include/asm/arch-meson/gx.h   |  1 +
 arch/arm/mach-meson/Kconfig            |  1 +
 arch/arm/mach-meson/board-axg.c        |  6 +++++
 arch/arm/mach-meson/board-common.c     | 45 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-meson/board-gx.c         |  6 +++++
 include/configs/meson64.h              | 13 ++++++++++
 8 files changed, 93 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-meson/boot.h
diff mbox series

Patch

diff --git a/arch/arm/include/asm/arch-meson/axg.h b/arch/arm/include/asm/arch-meson/axg.h
index 28a38b7..d293f2a 100644
--- a/arch/arm/include/asm/arch-meson/axg.h
+++ b/arch/arm/include/asm/arch-meson/axg.h
@@ -20,6 +20,7 @@ 
 #define AXG_AO_SEC_GP_CFG4	AXG_AO_ADDR(0x94)
 #define AXG_AO_SEC_GP_CFG5	AXG_AO_ADDR(0x95)
 
+#define AXG_AO_BOOT_DEVICE	0xF
 #define AXG_AO_MEM_SIZE_MASK	0xFFFF0000
 #define AXG_AO_MEM_SIZE_SHIFT	16
 #define AXG_AO_BL31_RSVMEM_SIZE_MASK	0xFFFF0000
diff --git a/arch/arm/include/asm/arch-meson/boot.h b/arch/arm/include/asm/arch-meson/boot.h
new file mode 100644
index 0000000..a90fe55
--- /dev/null
+++ b/arch/arm/include/asm/arch-meson/boot.h
@@ -0,0 +1,20 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __MESON_BOOT_H__
+#define __MESON_BOOT_H__
+
+/* Boot device */
+#define BOOT_DEVICE_RESERVED    0
+#define BOOT_DEVICE_EMMC        1
+#define BOOT_DEVICE_NAND        2
+#define BOOT_DEVICE_SPI         3
+#define BOOT_DEVICE_SD          4
+#define BOOT_DEVICE_USB         5
+
+int meson_get_boot_device(void);
+
+#endif /* __MESON_BOOT_H__ */
diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h
index 4bc9475..b781ba9 100644
--- a/arch/arm/include/asm/arch-meson/gx.h
+++ b/arch/arm/include/asm/arch-meson/gx.h
@@ -21,6 +21,7 @@ 
 #define GX_AO_SEC_GP_CFG4	GX_AO_ADDR(0x94)
 #define GX_AO_SEC_GP_CFG5	GX_AO_ADDR(0x95)
 
+#define GX_AO_BOOT_DEVICE	0xF
 #define GX_AO_MEM_SIZE_MASK	0xFFFF0000
 #define GX_AO_MEM_SIZE_SHIFT	16
 #define GX_AO_BL31_RSVMEM_SIZE_MASK	0xFFFF0000
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index deddcc5..11077bc 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -8,6 +8,7 @@  config MESON64_COMMON
 	select DM_SERIAL
 	select SYSCON
 	select REGMAP
+	select BOARD_LATE_INIT
 	imply CMD_DM
 
 config MESON_GX
diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c
index 014b25d..173905e 100644
--- a/arch/arm/mach-meson/board-axg.c
+++ b/arch/arm/mach-meson/board-axg.c
@@ -5,6 +5,7 @@ 
  */
 
 #include <common.h>
+#include <asm/arch/boot.h>
 #include <asm/arch/eth.h>
 #include <asm/arch/axg.h>
 #include <asm/arch/mem.h>
@@ -15,6 +16,11 @@ 
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int meson_get_boot_device(void)
+{
+	return readl(AXG_AO_SEC_GP_CFG0) & AXG_AO_BOOT_DEVICE;
+}
+
 /* Configure the reserved memory zones exported by the secure registers
  * into EFI and DTB reserved memory entries.
  */
diff --git a/arch/arm/mach-meson/board-common.c b/arch/arm/mach-meson/board-common.c
index 249e0d9..996bd28 100644
--- a/arch/arm/mach-meson/board-common.c
+++ b/arch/arm/mach-meson/board-common.c
@@ -4,6 +4,7 @@ 
  */
 
 #include <common.h>
+#include <asm/arch/boot.h>
 #include <linux/libfdt.h>
 #include <linux/err.h>
 #include <asm/arch/mem.h>
@@ -66,6 +67,50 @@  void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
 	}
 }
 
+static void meson_set_boot_source(void)
+{
+	const char *source;
+
+	switch (meson_get_boot_device()) {
+	case BOOT_DEVICE_EMMC:
+		source = "emmc";
+		break;
+
+	case BOOT_DEVICE_NAND:
+		source = "nand";
+		break;
+
+	case BOOT_DEVICE_SPI:
+		source = "spi";
+		break;
+
+	case BOOT_DEVICE_SD:
+		source = "sd";
+		break;
+
+	case BOOT_DEVICE_USB:
+		source = "usb";
+		break;
+
+	default:
+		source = "unknown";
+	}
+
+	env_set("boot_source", source);
+}
+
+__weak int meson_board_late_init(void)
+{
+	return 0;
+}
+
+int board_late_init(void)
+{
+	meson_set_boot_source();
+
+	return meson_board_late_init();
+}
+
 void reset_cpu(ulong addr)
 {
 	psci_system_reset();
diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c
index f1397f8..e41552d 100644
--- a/arch/arm/mach-meson/board-gx.c
+++ b/arch/arm/mach-meson/board-gx.c
@@ -5,6 +5,7 @@ 
  */
 
 #include <common.h>
+#include <asm/arch/boot.h>
 #include <asm/arch/eth.h>
 #include <asm/arch/gx.h>
 #include <asm/arch/mem.h>
@@ -15,6 +16,11 @@ 
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int meson_get_boot_device(void)
+{
+	return readl(GX_AO_SEC_GP_CFG0) & GX_AO_BOOT_DEVICE;
+}
+
 /* Configure the reserved memory zones exported by the secure registers
  * into EFI and DTB reserved memory entries.
  */
diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index f961f43..40ac079 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -28,6 +28,18 @@ 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_BOOTM_LEN		(64 << 20) /* 64 MiB */
 
+/* ROM USB boot support, auto-execute boot.scr at scriptaddr */
+#define BOOTENV_DEV_ROMUSB(devtypeu, devtypel, instance) \
+	"bootcmd_romusb=" \
+		"if test \"${boot_source}\" = \"usb\" && " \
+				"test -n \"${scriptaddr}\"; then " \
+			"echo '(ROM USB boot)'; " \
+			"source ${scriptaddr}; " \
+		"fi\0"
+
+#define BOOTENV_DEV_NAME_ROMUSB(devtypeu, devtypel, instance)	\
+		"romusb "
+
 #ifdef CONFIG_CMD_USB
 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 #else
@@ -36,6 +48,7 @@ 
 
 #ifndef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
+	func(ROMUSB, romusb, na)  \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \