From patchwork Fri Nov 9 15:26:43 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 10676187 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 224C913B0 for ; Fri, 9 Nov 2018 15:27:44 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 0D34028305 for ; Fri, 9 Nov 2018 15:27:44 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 0114B2ED55; Fri, 9 Nov 2018 15:27:43 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-3.6 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,MAILING_LIST_MULTI,RCVD_IN_DNSWL_LOW autolearn=ham version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 9A21428305 for ; Fri, 9 Nov 2018 15:27:42 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=VXVGd4CZQvaGl+Xj9RD7QalQatpo07tMFeuDB0Ua39k=; b=CJfnaqrBYmJfuS8vuJzPbViAhm 3wv436yhJs9G+FprJVKQ+IvyipGxoh15/+qH4iRxiP0Bz54RGI1uYcj53AaZC3IzrXdl4p63QiWmf cs/2n/AgoRBJ/Z6JQbMpuNcqaa7fkeyUcPDICAp5qMr7AIKHtGexNHrM9fqYdGlSdSy+l8w8Ay3jy MW2teIsMNEMfrVagyrnMJWR1KDyXgiNJvPT4KH4Kbn7bLjBXmF9FZMt0ysAnXqK5BIBFdkre+1vXj GwTceWQ1P6CmAnQmd8NgiRW4E7X9urHtB+d6OjosharbLRDXB0iRxTPrmiBZ1+jRrkuGLbAO+jmhA 93JWbJEA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gL8hB-00030i-MS; Fri, 09 Nov 2018 15:27:41 +0000 Received: from mail-wm1-x344.google.com ([2a00:1450:4864:20::344]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gL8go-0002YL-6O for linux-amlogic@lists.infradead.org; Fri, 09 Nov 2018 15:27:23 +0000 Received: by mail-wm1-x344.google.com with SMTP id f1-v6so4002888wmg.1 for ; Fri, 09 Nov 2018 07:27:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=XxWjjG5j8Q5FKTA0/ExKbmuD2nR18lrzkTRz81vgG9I=; b=WK4cYwkr/X6eIO1rh9kTZ8QWKiix4QemtIvWUGo5LOc/7Of1o/IKhLkVAyemJPQgIj avFbr/FRMgFkF/FForNABftlcQESiK4pBcNi5V0sRdW5oh9brfnst+nHMcDsXabiwlOA 7ta4KfAOyHvl3OVKnHt0avMJVLdhac6SpuzM65zNTyfJiZyEWVbwJo9yge8y64oxRWrS OVl2lhp2VTOmGdzK1ijSaSw4awFigL+HjiNTI9Ac8YPa4RPfaNsIkD50wj0P5LXXtMqx eiEWnjt1JjE3JUBSl2103JR6wb79+A+kSmXnIRCWk6s2+XP61aiuWNOQIvSpzAPkvC+I 3jkw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=XxWjjG5j8Q5FKTA0/ExKbmuD2nR18lrzkTRz81vgG9I=; b=tfeWZ8Sue2BH5AFwrrX30KbYT72AuCahsz6OzQcg6sB0Jne7sYzH5soYrcfKk68Jfu hYaWkv4+XpLx/SjT/xGXiwNp5HAkKmO4MRVEUPZfqyuDxlzMOsy2KMmf/4qweNZ3zZnM rVg4+zLkORI9rhm8tx+/NqgmHht15kcNN4VrybDzNJck0bAFiH6vyJ85OQV6qi155bS/ erwGjKQ1On4tmBlc4A25Nsit0+NKf2jRemZFUQl394OoaY8CNFot2I/RuCry3TXsZOao RSweGbX/LriEi8fl/mqSXkH9mwvwVGNT183vkUyUhWiE4N269yM0yTp+8CDVXLtq+DPn S/sA== X-Gm-Message-State: AGRZ1gIpq3EF657rwTBS8FsB468PlHPvyYV2ST+vgRflOvryqOXL17Aa ja4HYOZrQthkrCWw3eP355tcbw== X-Google-Smtp-Source: AJdET5d1dPhf4MNdCuxgJszJqP58DDLjWJavvWyD0WOEj4/ce6SiiHc7KecPGbhQZhxTUkQI9d+7QA== X-Received: by 2002:a1c:c50f:: with SMTP id v15-v6mr5257945wmf.22.1541777225032; Fri, 09 Nov 2018 07:27:05 -0800 (PST) Received: from bender.baylibre.local ([90.63.244.31]) by smtp.gmail.com with ESMTPSA id a127-v6sm1748545wmh.24.2018.11.09.07.27.04 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Fri, 09 Nov 2018 07:27:04 -0800 (PST) From: Neil Armstrong To: u-boot@lists.denx.de Subject: [PATCH u-boot 04/19] board: amlogic: move khadas-vim2 as q200 ref board Date: Fri, 9 Nov 2018 16:26:43 +0100 Message-Id: <1541777218-472-5-git-send-email-narmstrong@baylibre.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1541777218-472-1-git-send-email-narmstrong@baylibre.com> References: <1541777218-472-1-git-send-email-narmstrong@baylibre.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181109_072718_266310_979A6886 X-CRM114-Status: GOOD ( 18.89 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-amlogic@lists.infradead.org, trini@konsulko.com, Neil Armstrong MIME-Version: 1.0 Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP The Khadas vim2 derive from amlogic s912 reference design (Q200). This patch moves the khadas-vim2 board support to a generic Q200 board, while keeping a dedicated defconfig to customize the names and device tree. Signed-off-by: Neil Armstrong --- arch/arm/mach-meson/Kconfig | 9 +-- board/amlogic/khadas-vim2/Kconfig | 12 ---- board/amlogic/khadas-vim2/MAINTAINERS | 6 -- board/amlogic/khadas-vim2/Makefile | 6 -- board/amlogic/khadas-vim2/README | 103 -------------------------------- board/amlogic/khadas-vim2/khadas-vim2.c | 62 ------------------- board/amlogic/q200/Kconfig | 12 ++++ board/amlogic/q200/MAINTAINERS | 6 ++ board/amlogic/q200/Makefile | 6 ++ board/amlogic/q200/README.khadas-vim2 | 103 ++++++++++++++++++++++++++++++++ board/amlogic/q200/README.q200 | 102 +++++++++++++++++++++++++++++++ board/amlogic/q200/q200.c | 62 +++++++++++++++++++ configs/khadas-vim2_defconfig | 2 +- include/configs/khadas-vim2.h | 18 ------ include/configs/q200.h | 18 ++++++ 15 files changed, 315 insertions(+), 212 deletions(-) delete mode 100644 board/amlogic/khadas-vim2/Kconfig delete mode 100644 board/amlogic/khadas-vim2/MAINTAINERS delete mode 100644 board/amlogic/khadas-vim2/Makefile delete mode 100644 board/amlogic/khadas-vim2/README delete mode 100644 board/amlogic/khadas-vim2/khadas-vim2.c create mode 100644 board/amlogic/q200/Kconfig create mode 100644 board/amlogic/q200/MAINTAINERS create mode 100644 board/amlogic/q200/Makefile create mode 100644 board/amlogic/q200/README.khadas-vim2 create mode 100644 board/amlogic/q200/README.q200 create mode 100644 board/amlogic/q200/q200.c delete mode 100644 include/configs/khadas-vim2.h create mode 100644 include/configs/q200.h diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index e0b2812..98303db 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -50,13 +50,14 @@ config TARGET_P212 You should also select this TARGET if you have Khadas Vim or a libretech aml-s905x-cc -config TARGET_KHADAS_VIM2 +config TARGET_Q200 bool "KHADAS-VIM2" select MESON_GXM help - Khadas VIM2 is a single board computer based on Meson GXM + Q200 is a reference dessign board based on Meson GXM with 2/3 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot, - eMMC, IR receiver and a 40-pin GPIO header. + eMMC, IR receiver. + You should also select this TARGET if you have Khadas Vim2. endchoice @@ -72,6 +73,6 @@ source "board/amlogic/nanopi-k2/Kconfig" source "board/amlogic/p212/Kconfig" -source "board/amlogic/khadas-vim2/Kconfig" +source "board/amlogic/q200/Kconfig" endif diff --git a/board/amlogic/khadas-vim2/Kconfig b/board/amlogic/khadas-vim2/Kconfig deleted file mode 100644 index d0af362..0000000 --- a/board/amlogic/khadas-vim2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_KHADAS_VIM2 - -config SYS_BOARD - default "khadas-vim2" - -config SYS_VENDOR - default "amlogic" - -config SYS_CONFIG_NAME - default "khadas-vim2" - -endif diff --git a/board/amlogic/khadas-vim2/MAINTAINERS b/board/amlogic/khadas-vim2/MAINTAINERS deleted file mode 100644 index ca63e31..0000000 --- a/board/amlogic/khadas-vim2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -KHADAS-VIM2 -M: Neil Armstrong -S: Maintained -F: board/amlogic/khadas-vim2/ -F: include/configs/khadas-vim2.h -F: configs/khadas-vim2_defconfig diff --git a/board/amlogic/khadas-vim2/Makefile b/board/amlogic/khadas-vim2/Makefile deleted file mode 100644 index 4e7c9a0..0000000 --- a/board/amlogic/khadas-vim2/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2016 BayLibre, SAS -# Author: Neil Armstrong - -obj-y := khadas-vim2.o diff --git a/board/amlogic/khadas-vim2/README b/board/amlogic/khadas-vim2/README deleted file mode 100644 index 578693f..0000000 --- a/board/amlogic/khadas-vim2/README +++ /dev/null @@ -1,103 +0,0 @@ -U-Boot for Khadas VIM2 -======================= - -Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion -Technology Co., Ltd with the following specifications: - - - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz - - ARM Mali T860 GPU - - 2/3GB DDR4 SDRAM - - 10/100/1000 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG - - 16GB/32GB/64GB eMMC - - 2MB SPI Flash - - microSD - - SDIO Wifi Module, Bluetooth - - Two channels IR receiver - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export ARCH=arm - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot - > cd vim-u-boot - > make kvim_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/khadas-vim2/khadas-vim2.c b/board/amlogic/khadas-vim2/khadas-vim2.c deleted file mode 100644 index ff56569..0000000 --- a/board/amlogic/khadas-vim2/khadas-vim2.c +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016 BayLibre, SAS - * Author: Neil Armstrong - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define EFUSE_SN_OFFSET 20 -#define EFUSE_SN_SIZE 16 -#define EFUSE_MAC_OFFSET 52 -#define EFUSE_MAC_SIZE 6 - -int board_init(void) -{ - return 0; -} - -int misc_init_r(void) -{ - u8 mac_addr[EFUSE_MAC_SIZE]; - char serial[EFUSE_SN_SIZE]; - ssize_t len; - - meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GX_GPIO_EN(3), BIT(14)); - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GX_GPIO_OUT(3), BIT(14)); - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); - if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - - if (!env_get("serial#")) { - len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, - EFUSE_SN_SIZE); - if (len == EFUSE_SN_SIZE) - env_set("serial#", serial); - } - - return 0; -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - meson_gx_init_reserved_memory(blob); - - return 0; -} diff --git a/board/amlogic/q200/Kconfig b/board/amlogic/q200/Kconfig new file mode 100644 index 0000000..cfaf379 --- /dev/null +++ b/board/amlogic/q200/Kconfig @@ -0,0 +1,12 @@ +if TARGET_Q200 + +config SYS_BOARD + default "q200" + +config SYS_VENDOR + default "amlogic" + +config SYS_CONFIG_NAME + default "q200" + +endif diff --git a/board/amlogic/q200/MAINTAINERS b/board/amlogic/q200/MAINTAINERS new file mode 100644 index 0000000..be86386 --- /dev/null +++ b/board/amlogic/q200/MAINTAINERS @@ -0,0 +1,6 @@ +Q200 +M: Neil Armstrong +S: Maintained +F: board/amlogic/q200/ +F: include/configs/q200.h +F: configs/khadas-vim2_defconfig diff --git a/board/amlogic/q200/Makefile b/board/amlogic/q200/Makefile new file mode 100644 index 0000000..fd78fd0 --- /dev/null +++ b/board/amlogic/q200/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 BayLibre, SAS +# Author: Neil Armstrong + +obj-y := q200.o diff --git a/board/amlogic/q200/README.khadas-vim2 b/board/amlogic/q200/README.khadas-vim2 new file mode 100644 index 0000000..578693f --- /dev/null +++ b/board/amlogic/q200/README.khadas-vim2 @@ -0,0 +1,103 @@ +U-Boot for Khadas VIM2 +======================= + +Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion +Technology Co., Ltd with the following specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T860 GPU + - 2/3GB DDR4 SDRAM + - 10/100/1000 Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG + - 16GB/32GB/64GB eMMC + - 2MB SPI Flash + - microSD + - SDIO Wifi Module, Bluetooth + - Two channels IR receiver + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - USB Host + - ADC + +U-Boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make khadas-vim2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot + > cd vim-u-boot + > make kvim_defconfig + > make + > export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > cp $FIPDIR/gxl/bl2.bin fip/ + > cp $FIPDIR/gxl/acs.bin fip/ + > cp $FIPDIR/gxl/bl21.bin fip/ + > cp $FIPDIR/gxl/bl30.bin fip/ + > cp $FIPDIR/gxl/bl301.bin fip/ + > cp $FIPDIR/gxl/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/README.q200 b/board/amlogic/q200/README.q200 new file mode 100644 index 0000000..55d730a --- /dev/null +++ b/board/amlogic/q200/README.q200 @@ -0,0 +1,102 @@ +U-Boot for Amlogic Q200 +======================= + +Q200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T860 GPU + - 2/3GB DDR4 SDRAM + - 10/100/1000 Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host, 1 x USB 2.0 Device + - 16GB/32GB/64GB eMMC + - 2MB SPI Flash + - microSD + - SDIO Wifi Module, Bluetooth + - IR receiver + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - USB Host + - ADC + +U-Boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make khadas-vim2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + > cd amlogic-u-boot + > make gxm_q200_v1_defconfig + > make + > export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > cp $FIPDIR/gxl/bl2.bin fip/ + > cp $FIPDIR/gxl/acs.bin fip/ + > cp $FIPDIR/gxl/bl21.bin fip/ + > cp $FIPDIR/gxl/bl30.bin fip/ + > cp $FIPDIR/gxl/bl301.bin fip/ + > cp $FIPDIR/gxl/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c new file mode 100644 index 0000000..ff56569 --- /dev/null +++ b/board/amlogic/q200/q200.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 BayLibre, SAS + * Author: Neil Armstrong + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define EFUSE_SN_OFFSET 20 +#define EFUSE_SN_SIZE 16 +#define EFUSE_MAC_OFFSET 52 +#define EFUSE_MAC_SIZE 6 + +int board_init(void) +{ + return 0; +} + +int misc_init_r(void) +{ + u8 mac_addr[EFUSE_MAC_SIZE]; + char serial[EFUSE_SN_SIZE]; + ssize_t len; + + meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + + /* Reset PHY on GPIOZ_14 */ + clrbits_le32(GX_GPIO_EN(3), BIT(14)); + clrbits_le32(GX_GPIO_OUT(3), BIT(14)); + mdelay(10); + setbits_le32(GX_GPIO_OUT(3), BIT(14)); + + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + mac_addr, EFUSE_MAC_SIZE); + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) + eth_env_set_enetaddr("ethaddr", mac_addr); + } + + if (!env_get("serial#")) { + len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, + EFUSE_SN_SIZE); + if (len == EFUSE_SN_SIZE) + env_set("serial#", serial); + } + + return 0; +} + +int ft_board_setup(void *blob, bd_t *bd) +{ + meson_gx_init_reserved_memory(blob); + + return 0; +} diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index f21e3a8..387d7da 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXM=y -CONFIG_TARGET_KHADAS_VIM2=y +CONFIG_TARGET_Q200=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim2" diff --git a/include/configs/khadas-vim2.h b/include/configs/khadas-vim2.h deleted file mode 100644 index 7ef8f42..0000000 --- a/include/configs/khadas-vim2.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Khadas VIM2 - * - * Copyright (C) 2017 Baylibre, SAS - * Author: Neil Armstrong - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MISC_INIT_R - -#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxm-khadas-vim2.dtb\0" - -#include - -#endif /* __CONFIG_H */ diff --git a/include/configs/q200.h b/include/configs/q200.h new file mode 100644 index 0000000..7ef8f42 --- /dev/null +++ b/include/configs/q200.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration for Khadas VIM2 + * + * Copyright (C) 2017 Baylibre, SAS + * Author: Neil Armstrong + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MISC_INIT_R + +#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxm-khadas-vim2.dtb\0" + +#include + +#endif /* __CONFIG_H */