From patchwork Fri Nov 9 15:26:44 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 10676185 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 8FD6713B0 for ; Fri, 9 Nov 2018 15:27:42 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7822328305 for ; Fri, 9 Nov 2018 15:27:42 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 6C3352ED55; Fri, 9 Nov 2018 15:27:42 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-3.6 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,MAILING_LIST_MULTI,RCVD_IN_DNSWL_LOW autolearn=ham version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 4D74F28305 for ; Fri, 9 Nov 2018 15:27:41 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=R57xw+pzfdfk3a7OAgDf0Jks23f//TaW0WcuP/zMvAU=; b=LcykZvHQl78nk0h7bftMJQtoLS AKewQHexCsLxjf++9DBBRojwypvhf2hiw4bnHj/3wf83dtYaPpl4UXNZa/wqioJuLTGuVXZ+MoyLp 1Bmw3GYT+BaZltkTr+0z/nVDY4gLwoKZ9erIzQGrVcEVPWuOAuCqag9eyD/k3v5xEvuXgjhaflP66 FKHWmuLVEVANWxNY9aCsUVBGCroYTqQwrLs7gH5dei+ywC+qZke6eRMrMBXaRbvTBMiS0xd9U1hSj lZWBlFjAXqdnGomWOu24hykn8M+J5ky4kHkvOXz/uj/4E/45LbN9Py2aqRtYA66Xcf/OnWXdhxTsQ vjTgEd0Q==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gL8hA-0002yS-Ad; Fri, 09 Nov 2018 15:27:40 +0000 Received: from mail-wm1-x344.google.com ([2a00:1450:4864:20::344]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gL8go-0002YM-6R for linux-amlogic@lists.infradead.org; Fri, 09 Nov 2018 15:27:23 +0000 Received: by mail-wm1-x344.google.com with SMTP id r11-v6so2380409wmb.2 for ; Fri, 09 Nov 2018 07:27:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=XKb9HzGzvoMnqsQuGlUooa4JBAUPK0NMdVcF8K4Z08o=; b=zitS/k3vXISaRzdEyKUopQFlyZ2Rd1voBY7x1I7sLKN+JZspybjpzbUWMZY9cq76Wf HhcH9XHnvTTJZtlTSFMbSt8RQARKB2eh5foZ9GGSn9prCkV2lb+0Nv6CAZf1ZWUtirmv VWFoN+ViNTRxgaOAf3ZEv9Rfh2hQ67H9idxIPjJJszK/XBqndBorCXPXcQ+utdIynoTY oethu8jSEsiC6D5QIewsTQLSYScHmOL1uBBCqNSyA7iPL8UqwYRslaM5lzwrLCUUqSM1 RgnqmuF/cm9zYLzwy4IhGVpIlbJqcNGE7DUIrFJSX4MXSXJ9S96TmqwRWxcXL+DOZ6EG 7IJA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=XKb9HzGzvoMnqsQuGlUooa4JBAUPK0NMdVcF8K4Z08o=; b=sjuWvlJtZOvYfhC2O19mJi+Gs7T6r3cXHp8h4jK3Hr+n7+zhPJ5/udjXGh+s0tBTrY QRNJPTVnp/yof4oHPYKZ1pr2vRgzuahxc3nb81XkwwaeVo7Ik0ckd+WnT63XSZeNEBOP 1vjgn1i7KWXH/mKhblYZu3AxsgnSnxjvNE9Tk/0CF6r8kUGoS+pCytl/O4jM+Xgvujya 6H6xBT+UVUjOoVxO0kAcesty30uAQp1wznSCKWGi5Gjl5mXONcXZiOLTYwzkAtOto8ef iQz38LszKJOkcg/LHrqBs5/Q1T+JxV2HLu4LCN2zUlDu9fQ+6YEqebBM5nYw8W+eTr/d 54uQ== X-Gm-Message-State: AGRZ1gIe94D4fBf0L6XX5oJX2cjwwBRkZQHa2Yc+93aT6XVfrr8jpDxT bGQgJEVOi4Gp+gJGtc9eXVcSo4YqNrg= X-Google-Smtp-Source: AJdET5f5y/NIp3Vzp02zCYAkHgAEQFiCyvCF3y+t498H15N6KfIKB9ZoLAkdJa36gjw+QA0l6yiZiQ== X-Received: by 2002:a1c:3b06:: with SMTP id i6-v6mr4891960wma.18.1541777225812; Fri, 09 Nov 2018 07:27:05 -0800 (PST) Received: from bender.baylibre.local ([90.63.244.31]) by smtp.gmail.com with ESMTPSA id a127-v6sm1748545wmh.24.2018.11.09.07.27.05 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Fri, 09 Nov 2018 07:27:05 -0800 (PST) From: Neil Armstrong To: u-boot@lists.denx.de Subject: [PATCH u-boot 05/19] board: amlogic: factorise gxbb boards Date: Fri, 9 Nov 2018 16:26:44 +0100 Message-Id: <1541777218-472-6-git-send-email-narmstrong@baylibre.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1541777218-472-1-git-send-email-narmstrong@baylibre.com> References: <1541777218-472-1-git-send-email-narmstrong@baylibre.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181109_072718_262414_FFEFB86D X-CRM114-Status: GOOD ( 18.27 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-amlogic@lists.infradead.org, Neil Armstrong , trini@konsulko.com, Jerome Brunet MIME-Version: 1.0 Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP From: Jerome Brunet The nanopi-k2 and the odroid-c2 are similar enough to be supported by the same u-boot board. This change use odroid-c2 u-boot board for the nanopi-k2 as well. Dedicated defconfig are kept to customize the names and device tree. Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong --- arch/arm/mach-meson/Kconfig | 11 +--- board/amlogic/nanopi-k2/Kconfig | 12 ---- board/amlogic/nanopi-k2/MAINTAINERS | 6 -- board/amlogic/nanopi-k2/Makefile | 7 --- board/amlogic/nanopi-k2/README | 99 -------------------------------- board/amlogic/nanopi-k2/nanopi-k2.c | 55 ------------------ board/amlogic/odroid-c2/MAINTAINERS | 1 + board/amlogic/odroid-c2/README | 66 --------------------- board/amlogic/odroid-c2/README.nanopi-k2 | 99 ++++++++++++++++++++++++++++++++ board/amlogic/odroid-c2/README.odroid-c2 | 66 +++++++++++++++++++++ configs/nanopi-k2_defconfig | 2 +- 11 files changed, 168 insertions(+), 256 deletions(-) delete mode 100644 board/amlogic/nanopi-k2/Kconfig delete mode 100644 board/amlogic/nanopi-k2/MAINTAINERS delete mode 100644 board/amlogic/nanopi-k2/Makefile delete mode 100644 board/amlogic/nanopi-k2/README delete mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c delete mode 100644 board/amlogic/odroid-c2/README create mode 100644 board/amlogic/odroid-c2/README.nanopi-k2 create mode 100644 board/amlogic/odroid-c2/README.odroid-c2 diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 98303db..d86b1be 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -31,14 +31,7 @@ config TARGET_ODROID_C2 ODROID-C2 is a single board computer based on Meson GXBaby with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD slot, eMMC, IR receiver and a 40-pin GPIO header. - -config TARGET_NANOPI_K2 - bool "NANOPI_K2" - select MESON_GXBB - help - NANOPI_K2 is a single board computer based on Meson GXBaby - with 2 GiB of RAM, Gigabit Ethernet,AP6212 Wifi, HDMI, 4 USB, - micro-SD slot, eMMC, IR receiver and a 40-pin GPIO header. + You should also select this TARGET if you have an nanopi-k2 config TARGET_P212 bool "P212" @@ -69,8 +62,6 @@ config SYS_MALLOC_F_LEN source "board/amlogic/odroid-c2/Kconfig" -source "board/amlogic/nanopi-k2/Kconfig" - source "board/amlogic/p212/Kconfig" source "board/amlogic/q200/Kconfig" diff --git a/board/amlogic/nanopi-k2/Kconfig b/board/amlogic/nanopi-k2/Kconfig deleted file mode 100644 index 374bda2..0000000 --- a/board/amlogic/nanopi-k2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_NANOPI_K2 - -config SYS_BOARD - default "nanopi-k2" - -config SYS_VENDOR - default "amlogic" - -config SYS_CONFIG_NAME - default "nanopi-k2" - -endif diff --git a/board/amlogic/nanopi-k2/MAINTAINERS b/board/amlogic/nanopi-k2/MAINTAINERS deleted file mode 100644 index 0452bd1..0000000 --- a/board/amlogic/nanopi-k2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -NANOPI-K2 -M: Neil Armstrong -S: Maintained -F: board/amlogic/nanopi-k2/ -F: include/configs/nanopi-k2.h -F: configs/nanopi-k2_defconfig diff --git a/board/amlogic/nanopi-k2/Makefile b/board/amlogic/nanopi-k2/Makefile deleted file mode 100644 index 7d9b666..0000000 --- a/board/amlogic/nanopi-k2/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2018 Thomas McKahan -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := nanopi-k2.o diff --git a/board/amlogic/nanopi-k2/README b/board/amlogic/nanopi-k2/README deleted file mode 100644 index d450d3c..0000000 --- a/board/amlogic/nanopi-k2/README +++ /dev/null @@ -1,99 +0,0 @@ -U-Boot for NanoPi-K2 -==================== - -NanoPi-K2 is a single board computer manufactured by FriendlyElec -with the following specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - Gigabit Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host, 1 x USB OTG - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - -u-boot compilation -================== - - > export ARCH=arm - > export CROSS_COMPILE=aarch64-none-elf- - > make nanopi-k2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot - > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot - > cd amlogic-u-boot - > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile - > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile - > make nanopi-k2_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxb/bl2.bin fip/ - > cp $FIPDIR/gxb/acs.bin fip/ - > cp $FIPDIR/gxb/bl21.bin fip/ - > cp $FIPDIR/gxb/bl30.bin fip/ - > cp $FIPDIR/gxb/bl301.bin fip/ - > cp $FIPDIR/gxb/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/fip_create \ - --bl30 fip/bl30_new.bin \ - --bl31 fip/bl31.img \ - --bl33 fip/bl33.bin \ - fip/fip.bin - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin - - > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ - --input fip/boot_new.bin - --output fip/u-boot.bin - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c b/board/amlogic/nanopi-k2/nanopi-k2.c deleted file mode 100644 index ae29dd6..0000000 --- a/board/amlogic/nanopi-k2/nanopi-k2.c +++ /dev/null @@ -1,55 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2018 Thomas McKahan - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define EFUSE_SN_OFFSET 20 -#define EFUSE_SN_SIZE 16 -#define EFUSE_MAC_OFFSET 52 -#define EFUSE_MAC_SIZE 6 - -int board_init(void) -{ - return 0; -} - -int misc_init_r(void) -{ - u8 mac_addr[EFUSE_MAC_SIZE]; - char serial[EFUSE_SN_SIZE]; - ssize_t len; - - meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); - if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - - if (!env_get("serial#")) { - len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, - EFUSE_SN_SIZE); - if (len == EFUSE_SN_SIZE) - env_set("serial#", serial); - } - - return 0; -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - meson_gx_init_reserved_memory(blob); - - return 0; -} diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/odroid-c2/MAINTAINERS index 699850f..fd74d53 100644 --- a/board/amlogic/odroid-c2/MAINTAINERS +++ b/board/amlogic/odroid-c2/MAINTAINERS @@ -1,5 +1,6 @@ ODROID-C2 M: Beniamino Galvani +M: Neil Armstrong S: Maintained F: board/amlogic/odroid-c2/ F: include/configs/odroid-c2.h diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README deleted file mode 100644 index bed48c5..0000000 --- a/board/amlogic/odroid-c2/README +++ /dev/null @@ -1,66 +0,0 @@ -U-Boot for ODROID-C2 -==================== - -ODROID-C2 is a single board computer manufactured by Hardkernel -Co. Ltd with the following specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - Gigabit Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host, 1 x USB OTG - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC - -u-boot compilation -================== - - > export ARCH=arm - > export CROSS_COMPILE=aarch64-none-elf- - > make odroid-c2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > DIR=odroid-c2 - > git clone --depth 1 \ - https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ - $DIR - > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ - --bl301 $DIR/fip/gxb/bl301.bin \ - --bl31 $DIR/fip/gxb/bl31.bin \ - --bl33 u-boot.bin \ - $DIR/fip.bin - > $DIR/fip/fip_create --dump $DIR/fip.bin - > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin - > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ - --input $DIR/boot_new.bin \ - --output $DIR/u-boot.img - > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > BL1=$DIR/sd_fuse/bl1.bin.hardkernel - > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 - > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 - > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/board/amlogic/odroid-c2/README.nanopi-k2 b/board/amlogic/odroid-c2/README.nanopi-k2 new file mode 100644 index 0000000..d450d3c --- /dev/null +++ b/board/amlogic/odroid-c2/README.nanopi-k2 @@ -0,0 +1,99 @@ +U-Boot for NanoPi-K2 +==================== + +NanoPi-K2 is a single board computer manufactured by FriendlyElec +with the following specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - Gigabit Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host, 1 x USB OTG + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make nanopi-k2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot + > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot + > cd amlogic-u-boot + > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile + > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile + > make nanopi-k2_defconfig + > make + > export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > cp $FIPDIR/gxb/bl2.bin fip/ + > cp $FIPDIR/gxb/acs.bin fip/ + > cp $FIPDIR/gxb/bl21.bin fip/ + > cp $FIPDIR/gxb/bl30.bin fip/ + > cp $FIPDIR/gxb/bl301.bin fip/ + > cp $FIPDIR/gxb/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > $FIPDIR/fip_create \ + --bl30 fip/bl30_new.bin \ + --bl31 fip/bl31.img \ + --bl33 fip/bl33.bin \ + fip/fip.bin + + > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin + + > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ + --input fip/boot_new.bin + --output fip/u-boot.bin + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 diff --git a/board/amlogic/odroid-c2/README.odroid-c2 b/board/amlogic/odroid-c2/README.odroid-c2 new file mode 100644 index 0000000..bed48c5 --- /dev/null +++ b/board/amlogic/odroid-c2/README.odroid-c2 @@ -0,0 +1,66 @@ +U-Boot for ODROID-C2 +==================== + +ODROID-C2 is a single board computer manufactured by Hardkernel +Co. Ltd with the following specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - Gigabit Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host, 1 x USB OTG + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - ADC + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make odroid-c2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > DIR=odroid-c2 + > git clone --depth 1 \ + https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ + $DIR + > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ + --bl301 $DIR/fip/gxb/bl301.bin \ + --bl31 $DIR/fip/gxb/bl31.bin \ + --bl33 u-boot.bin \ + $DIR/fip.bin + > $DIR/fip/fip_create --dump $DIR/fip.bin + > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin + > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ + --input $DIR/boot_new.bin \ + --output $DIR/u-boot.img + > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > BL1=$DIR/sd_fuse/bl1.bin.hardkernel + > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 + > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 + > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig index 5c8c747..01196d6 100644 --- a/configs/nanopi-k2_defconfig +++ b/configs/nanopi-k2_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXBB=y -CONFIG_TARGET_NANOPI_K2=y +CONFIG_TARGET_ODROID_C2=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" nanopi-k2"