diff mbox series

[16/41] drivers: tty: serial: uartlite: fix overlong lines

Message ID 1556369542-13247-17-git-send-email-info@metux.net (mailing list archive)
State Not Applicable
Headers show
Series [01/41] drivers: tty: serial: dz: use dev_err() instead of printk() | expand

Commit Message

Enrico Weigelt, metux IT consult April 27, 2019, 12:51 p.m. UTC
Fix checkpatch warnings:

    WARNING: line over 80 characters
    #283: FILE: drivers/tty/serial/uartlite.c:283:
    +	ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,

    WARNING: Missing a blank line after declarations
    #577: FILE: drivers/tty/serial/uartlite.c:577:
    +	struct earlycon_device *device = console->data;
    +	uart_console_write(&device->port, s, n, early_uartlite_putc);

    WARNING: line over 80 characters
    #590: FILE: drivers/tty/serial/uartlite.c:590:
    +OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);

    WARNING: line over 80 characters
    #591: FILE: drivers/tty/serial/uartlite.c:591:
    +OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);

Signed-off-by: Enrico Weigelt <info@metux.net>
---
 drivers/tty/serial/uartlite.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

Comments

Peter Korsgaard April 29, 2019, 3:24 p.m. UTC | #1
>>>>> "Enrico" == Enrico Weigelt, metux IT consult <info@metux.net> writes:

 > Fix checkpatch warnings:
 >     WARNING: line over 80 characters
 >     #283: FILE: drivers/tty/serial/uartlite.c:283:
 >     +	ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,

 >     WARNING: Missing a blank line after declarations
 >     #577: FILE: drivers/tty/serial/uartlite.c:577:
 >     +	struct earlycon_device *device = console->data;
 >     +	uart_console_write(&device->port, s, n, early_uartlite_putc);

 >     WARNING: line over 80 characters
 >     #590: FILE: drivers/tty/serial/uartlite.c:590:
 >     +OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);

 >     WARNING: line over 80 characters
 >     #591: FILE: drivers/tty/serial/uartlite.c:591:
 >     +OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);

Given that these are just a few characters more than 80 I don't really
think these changes improve readability.


 > Signed-off-by: Enrico Weigelt <info@metux.net>
 > ---
 >  drivers/tty/serial/uartlite.c | 10 +++++++---
 >  1 file changed, 7 insertions(+), 3 deletions(-)

 > diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
 > index 6f79353..0140cec 100644
 > --- a/drivers/tty/serial/uartlite.c
 > +++ b/drivers/tty/serial/uartlite.c
 > @@ -280,7 +280,8 @@ static int ulite_startup(struct uart_port *port)
 >  		return ret;
 >  	}
 
 > -	ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
 > +	ret = request_irq(port->irq, ulite_isr,
 > +			  IRQF_SHARED | IRQF_TRIGGER_RISING,
 >  			  "uartlite", port);
 >  	if (ret)
 >  		return ret;
 > @@ -574,6 +575,7 @@ static void early_uartlite_write(struct console *console,
 >  				 const char *s, unsigned int n)
 >  {
 >  	struct earlycon_device *device = console->data;
 > +
 >  	uart_console_write(&device->port, s, n, early_uartlite_putc);

Unrelated change?
diff mbox series

Patch

diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 6f79353..0140cec 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -280,7 +280,8 @@  static int ulite_startup(struct uart_port *port)
 		return ret;
 	}
 
-	ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
+	ret = request_irq(port->irq, ulite_isr,
+			  IRQF_SHARED | IRQF_TRIGGER_RISING,
 			  "uartlite", port);
 	if (ret)
 		return ret;
@@ -574,6 +575,7 @@  static void early_uartlite_write(struct console *console,
 				 const char *s, unsigned int n)
 {
 	struct earlycon_device *device = console->data;
+
 	uart_console_write(&device->port, s, n, early_uartlite_putc);
 }
 
@@ -587,8 +589,10 @@  static int __init early_uartlite_setup(struct earlycon_device *device,
 	return 0;
 }
 EARLYCON_DECLARE(uartlite, early_uartlite_setup);
-OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);
-OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);
+OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b",
+		    early_uartlite_setup);
+OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a",
+		    early_uartlite_setup);
 
 #endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */