[v2,1/3] ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95 devices

Commit Message

Martin Blumenstingl Sept. 4, 2016, 6:29 p.m. UTC

sd_emmc_b is routed to the SD-card. Unlike p20x there is no GPIO
regulator, meaning it only supports 3.3V (which seems to be hard-wired).

Signed-off-by: Martin Blumenstingl <[e-mail]>
Tested-by: Andreas Färber <[e-mail]>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi      | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 560770e..e9ead47 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -52,6 +52,16 @@ 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	vcc_3v3: regulator@0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+	};
 };
 
 &uart_AO {
@@ -66,3 +76,19 @@ 
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
+
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vcc_3v3>;
+	voltage-ranges = <3300 3300>;
+};