diff mbox

[v2,2/2] ARM64: dts: meson-gxbb: add the SDIO pins

Message ID 20160911123903.20027-3-martin.blumenstingl@googlemail.com (mailing list archive)
State Accepted
Headers show

Commit Message

Martin Blumenstingl Sept. 11, 2016, 12:39 p.m. UTC 
From: Neil Armstrong <narmstrong@baylibre.com>

This is used to configure the pins of the sd_emmc_a controller to
which an SDIO module is connected (when available).

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Kevin Hilman Sept. 12, 2016, 6:13 p.m. UTC | #1 
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:

> From: Neil Armstrong <narmstrong@baylibre.com>
>
> This is used to configure the pins of the sd_emmc_a controller to
> which an SDIO module is connected (when available).
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Applied,

Kevin
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index c84cacf..fe2a1fc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -394,6 +394,25 @@ 
 					};
 				};
 
+				sdio_pins: sdio {
+					mux {
+						groups = "sdio_d0",
+						       "sdio_d1",
+						       "sdio_d2",
+						       "sdio_d3",
+						       "sdio_cmd",
+						       "sdio_clk";
+						function = "sdio";
+					};
+				};
+
+				sdio_irq_pins: sdio_irq {
+					mux {
+						groups = "sdio_irq";
+						function = "sdio";
+					};
+				};
+
 				uart_a_pins: uart_a {
 					mux {
 						groups = "uart_tx_a",