diff mbox

[2/4] ARM64: dts: meson-gx: add the serial CTS and RTS pin groups

Message ID 20170115223255.10350-3-martin.blumenstingl@googlemail.com (mailing list archive)
State Accepted
Headers show

Commit Message

Martin Blumenstingl Jan. 15, 2017, 10:32 p.m. UTC
This adds pinctrl group nodes for the CTS and RTS pins of each serial
controller. This makes it possible to enable the CTS and RTS pins which
are controlled by the serial controller hardware (through the meson_uart
driver).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 40 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 40 +++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)

Comments

Andreas Färber Jan. 15, 2017, 10:50 p.m. UTC | #1
Am 15.01.2017 um 23:32 schrieb Martin Blumenstingl:
> This adds pinctrl group nodes for the CTS and RTS pins of each serial
> controller. This makes it possible to enable the CTS and RTS pins which
> are controlled by the serial controller hardware (through the meson_uart
> driver).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Tested-by: Andreas Färber <afaerber@suse.de>

Thanks,
Andreas
Kevin Hilman Jan. 18, 2017, 9:52 p.m. UTC | #2
Andreas Färber <afaerber@suse.de> writes:

> Am 15.01.2017 um 23:32 schrieb Martin Blumenstingl:
>> This adds pinctrl group nodes for the CTS and RTS pins of each serial
>> controller. This makes it possible to enable the CTS and RTS pins which
>> are controlled by the serial controller hardware (through the meson_uart
>> driver).
>> 
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> Tested-by: Andreas Färber <afaerber@suse.de>

Applied to v4.11/dt64 with Andreas' ack.

Kevin
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 474435e21759..f001c4d007bc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -138,6 +138,14 @@ 
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
 		uart_ao_b_pins: uart_ao_b {
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
@@ -145,6 +153,14 @@ 
 			};
 		};
 
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
@@ -290,6 +306,14 @@ 
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -298,6 +322,14 @@ 
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -306,6 +338,14 @@ 
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 53ed7a5f50ab..7d7fd87f094b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -82,6 +82,14 @@ 
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
 		uart_ao_b_pins: uart_ao_b {
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
@@ -89,6 +97,14 @@ 
 			};
 		};
 
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
@@ -164,6 +180,14 @@ 
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -172,6 +196,14 @@ 
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -180,6 +212,14 @@ 
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",