diff mbox

[v2,2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs

Message ID 20170520141250.27388-3-martin.blumenstingl@googlemail.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Martin Blumenstingl May 20, 2017, 2:12 p.m. UTC
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
adds a new compatible string to indicate that this binding also supports
the Meson8 SoCs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) May 30, 2017, 10:51 p.m. UTC | #1
On Sat, May 20, 2017 at 04:12:50PM +0200, Martin Blumenstingl wrote:
> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
> adds a new compatible string to indicate that this binding also supports
> the Meson8 SoCs.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9d20f5..d81d73aea608 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@ 
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
 
 Required properties:
 - compatible:	Depending on the platform this should be one of:
+	"amlogic,meson8-usb2-phy"
 	"amlogic,meson8b-usb2-phy"
 	"amlogic,meson-gxbb-usb2-phy"
 - reg:		The base address and length of the registers