| Message ID | 20180209192724.1227-4-marcus.folkesson@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Fri, Feb 09, 2018 at 08:27:20PM +0100, Marcus Folkesson wrote: > watchdog_init_timeout() will allways pick timeout_param since it > defaults to a valid timeout. > > By following best practice described in > Documentation/watchdog/watchdog-kernel-api.txt, it also > let us to set timout-sec property in devicetree. > > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt | 4 ++++ > drivers/watchdog/sirfsoc_wdt.c | 2 +- > 2 files changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt > index 9cbc76c89b2b..0dce5e3100b4 100644 > --- a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt > +++ b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt > @@ -5,10 +5,14 @@ Required properties: > - reg: Address range of tick timer/WDT register set > - interrupts: interrupt number to the cpu > > +Optional properties: > +- timeout-sec : Contains the watchdog timeout in seconds > + > Example: > > timer@b0020000 { > compatible = "sirf,prima2-tick"; > reg = <0xb0020000 0x1000>; > interrupts = <0>; > + timeout-sec = <30>; > }; > diff --git a/drivers/watchdog/sirfsoc_wdt.c b/drivers/watchdog/sirfsoc_wdt.c > index 4eea351e09b0..ac0c9d2c4aee 100644 > --- a/drivers/watchdog/sirfsoc_wdt.c > +++ b/drivers/watchdog/sirfsoc_wdt.c > @@ -29,7 +29,7 @@ > #define SIRFSOC_WDT_MAX_TIMEOUT (10 * 60) /* 10 mins */ > #define SIRFSOC_WDT_DEFAULT_TIMEOUT 30 /* 30 secs */ > > -static unsigned int timeout = SIRFSOC_WDT_DEFAULT_TIMEOUT; > +static unsigned int timeout; > static bool nowayout = WATCHDOG_NOWAYOUT; > > module_param(timeout, uint, 0); > -- > 2.15.1 >
diff --git a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt index 9cbc76c89b2b..0dce5e3100b4 100644 --- a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt @@ -5,10 +5,14 @@ Required properties: - reg: Address range of tick timer/WDT register set - interrupts: interrupt number to the cpu +Optional properties: +- timeout-sec : Contains the watchdog timeout in seconds + Example: timer@b0020000 { compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + timeout-sec = <30>; }; diff --git a/drivers/watchdog/sirfsoc_wdt.c b/drivers/watchdog/sirfsoc_wdt.c index 4eea351e09b0..ac0c9d2c4aee 100644 --- a/drivers/watchdog/sirfsoc_wdt.c +++ b/drivers/watchdog/sirfsoc_wdt.c @@ -29,7 +29,7 @@ #define SIRFSOC_WDT_MAX_TIMEOUT (10 * 60) /* 10 mins */ #define SIRFSOC_WDT_DEFAULT_TIMEOUT 30 /* 30 secs */ -static unsigned int timeout = SIRFSOC_WDT_DEFAULT_TIMEOUT; +static unsigned int timeout; static bool nowayout = WATCHDOG_NOWAYOUT; module_param(timeout, uint, 0);
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> --- Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt | 4 ++++ drivers/watchdog/sirfsoc_wdt.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)